IC Phoenix
 
Home ›  TT89 > TSM109AID-TSM109AIDT-TSM109ID-TSM109IDT,DUAL COMPARATOR AND VOLTAGE REFERENCE
TSM109AID-TSM109AIDT-TSM109ID-TSM109IDT Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
TSM109IDSTN/a5200avaiDUAL COMPARATOR AND VOLTAGE REFERENCE
TSM109AIDSTN/a5200avaiDUAL COMPARATOR AND VOLTAGE REFERENCE
TSM109AIDTSTN/a5200avaiDUAL COMPARATOR AND VOLTAGE REFERENCE
TSM109IDTSTN/a5200avaiDUAL COMPARATOR AND VOLTAGE REFERENCE


TSM109ID ,DUAL COMPARATOR AND VOLTAGE REFERENCEABSOLUTE MAXIMUM RATINGS Symbol Parameter Value UnitV Supply voltage 36 VCCVDifferential Input ..
TSM109IDT ,DUAL COMPARATOR AND VOLTAGE REFERENCEELECTRICAL CHARACTERISTICS+ -V = 5V, V = 0V, T = 25°C (unless otherwise specified) CC CC ambSymb ..
TSM111CD ,TRIPLE VOLTAGE AND CURRENT SUPERVISORTSM111TRIPLE VOLTAGE AND CURRENT SUPERVISOR ■ OVERVOLTAGE PROTECTION FOR 3.3V, 5V AND 12V WIT ..
TSM111CDT ,TRIPLE VOLTAGE AND CURRENT SUPERVISORABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit1)V44 VCC DC Supply Voltage pin 5 IOutput ..
TSM111CN ,TRIPLE VOLTAGE AND CURRENT SUPERVISORTSM111TRIPLE VOLTAGE AND CURRENT SUPERVISOR ■ OVERVOLTAGE PROTECTION FOR 3.3V, 5V AND 12V WIT ..
TSM1121ID ,3.3V 5V 12V HOUSEKEEPING ICELECTRICAL CHARACTERISTICS Tamb = 25°C and Vcc = 17V (unless otherwise specified) Symbol Par ..
UC282T-ADJ ,1maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
UC282TD-1 ,1maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
UC282TD-3 ,1maximum ratings over operating free-air temperature (unless otherwise noted)VB . . . . . . . . . . ..
UC282TD-ADJ ,1maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
UC282TDKTTT-1 ,1electrical characteristics, T = −40°C to 100°C for the UC282-X series and 0°C to 100°C for theAUC38 ..
UC282TDKTTT-1 ,1electrical characteristics, T = −40°C to 100°C for the UC282-X series and 0°C to 100°C for theAUC38 ..


TSM109AID-TSM109AIDT-TSM109ID-TSM109IDT
DUAL COMPARATOR AND VOLTAGE REFERENCE
COMPARATOR LOW SUPPLY CURRENT (1.1mA) INDE-
PENDENT OF SUPPLY VOLTAGE LOW INPUT BIAS CURRENT : 25nA TYP LOW INPUT OFFSET VOLTAGE : ±1mV TYP INPUT COMMON-MODE VOLTAGE RANGE
INCLUDES GROUND LOW OUTPUT SATURATION VOLTAGE :
250mV TYP; (Io = 4mA) DIFFERENTIAL INPUT VOLTAGE RANGE
EQUAL TO THE SUPPLY VOLTAGE WIDE POWER SUPPLY RANGE : ±1V to
±18V ESD PROTECTION : 1.5kV
VOLTAGE REFERENCE
Fixed Vref to 2.5V 0.4% AND 1% VOLTAGE PRECISION SINK CURRENT CAPABILITY : 1 to 100mA
DESCRIPTION

The TSM109 is a monolithic IC that includes two
comparators and a shunt voltage reference. This
device offers space and cost savings in many ap-
plications including power supply management or
data acquisition systems.

ORDER CODE
N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT)
PIN CONNECTIONS (top view)
TSM109/A

DUAL COMPARATOR AND VOLTAGE REFERENCE
TSM109/A
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS

VCC+ = 5V, VCC- = 0V, Tamb = 25°C (unless otherwise specified)
TSM109/A
ELECTRICAL CHARACTERISTICS
COMPARATOR (independent comparator)

VCC+ = +5V, VCC- = GND, Tamb = +25°C (unless otherwise specified) At output switch point, Vo ≈ 1.4V, Rs = 0 with VCC+ from 5V to 30V, and over the full common-mode range (0V to VCC+ -1.5V). The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output, so no loading charge exists on the reference of input lines. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is VCC+ -1.5V, but either or both inputs can go to +30V without damage. Positive voltage excursions of one input may exceed the power supply level. As long as the other input voltage remains within the common-mode
range, the comparator will provide an appropriate output state. The low input voltage state must not be less than -0.3V (or 0.3V below the negativepower supply, if used). The response time specified is for a 100mV input step with 5mV overdrive. For larger overdrive signals, 300ns can be obtained
TSM109/A
COMPARATOR (comparator with inverting input connected to the internal Vref))

VCC+ = +5V, VCC- = GND, Tamb = +25°C (unless otherwise specified) At output switch point, Vo ≈ 1.4V, Rs = 0 with VCC+ from 5V to 30V, and over the full common-mode range (0V to VCC+ -1.5V). The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the
output, so no loading charge exists on the reference of input lines. The response time specified is for a 100mV input step with 5mV overdrive. For larger overdrive signals, 300ns can be obtained.
TSM109/A
ELECTRICAL CHARACTERISTICS
VOLTAGE REFERENCE

Tamb = 25°C (unless otherwise specified) The dynamic impedance is defined as [ZVref| = ΔVVref/ΔIK
TSM109/A
PACKAGE MECHANICAL DATA

8 PINS - PLASTIC DIP
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED