TLE4265 ,5 V Low-Drop Voltage RegulatorFunctional DescriptionTLE 4265 is a 5-V low-drop voltage regulator in a TO220-5 package. Maximum in ..
TLE4267 ,Voltage RegulatorFunctional DescriptionTLE 4267 is a 5-V low-drop voltage regulator forP-DSO-14-8automotive
TLE4268 ,Voltage RegulatorFeatures• Output voltage tolerance ≤ ± 2% Very low current consumption Low-drop voltage Watchdo ..
TLE4268 G , 5-V Low-Drop Fixed Voltage Regulator
TLE4268G , 5-V Low-Drop Fixed Voltage Regulator
TLE4268G , 5-V Low-Drop Fixed Voltage Regulator
TMP86P202P , High performance, Low Cost 20 pin OTP TMP86P202P
TMP86P202PG , 8 Bit Microcontroller
TMP86P807MG , 8 Bit Microcontroller
TMP86P807MG , 8 Bit Microcontroller
TMP86P808DMG , 8 Bit Microcontroller
TMP86P808DMG , 8 Bit Microcontroller
TLE4265
5 V Low-Drop Voltage Regulator
( Infineon
technologies
5-V Low-Drop Voltage Regulator
Features
. Output voltage tolerance s i 2 %
. Low-drop voltage
q Very low standby current consumption
. Overtemperature protection
q Reverse polarity protection
q Short-circuit proof
. Setable reset threshold
q Wide temperature range
q Suitable for use in automotive electronics
TLE 4265
Bipolar IC
P-T0220-5-1
Type Ordering Code Package
TLE 4265 Q67000-A9138 P-TO220-5-1
TLE 4265S Q67000-A9277 P-T0220-5-2
Functional Description
P-TO 220-5-2
TLE 4265 is a 5-V Iow-drop voltage regulator in a T0220-5 package. Maximum input
voltage is 45 V. It can produce an output current of > 200 mA. The IC is shortcircuit-proof
and thermal protected.
Application
The IC regulates an input voltage V. in the range 6 V < VI < 45 V to VQrated = 5.0 V. A reset
signal is generated for an output voltage K, of < 4.5 V. The reset delay can be set with
an external capacitor. This voltage regulator is especially suitable for microprocessor
applications in automobiles.
Data Sheet Version 1.01
( Infineon TLE 4265
tec no ogles
Pin Configuration
(top view)
P-T0220-5-1 P-T0220-5-2
oc]), C)
12345 12
" oGNDo Va
QRES DRES
AEP01492
ORES DRES
v1 GND l
AEP02091
Pin Definitions and Functions
Pin Symbol Function
1 VI Input voltage; block direct on IC with ceramic capacitor to GND
2 QRES Reset output; open-collector output connected to output across
resistor of 30 kg
3 GND Ground
4 DRES Reset delay; wire with capacitor to GND for setting delay
5 V0 5-V output voltage; block to GND with 22-WF capacitor
Data Sheet Version 1.01 2 2000-02-09
