TDA1517 ,2 x 6 W stereo power amplifierINTEGRATED CIRCUITSDATA SHEETTDA1517; TDA1517P2 × 6 W stereo power amplifierProduct specification 20 ..
TDA1517/N3 ,TDA1517; TDA1517P; 2 x 6 W stereo power amplifier
TDA1517/N3 ,TDA1517; TDA1517P; 2 x 6 W stereo power amplifier
TDA1517ATW ,8 W BTL or 2 脳 4 W SE powerapplications.• AC and DC short-circuit safe to ground and VPQUICK REFERENCE DATASYMBOL PARAMETER CO ..
TDA1517ATW ,8 W BTL or 2 脳 4 W SE powerapplications.• AC and DC short-circuit safe to ground and VPQUICK REFERENCE DATASYMBOL PARAMETER CO ..
TDA1517-N3 ,TDA1517; TDA1517P; 2 x 6 W stereo power amplifier
TEA6101T ,Antenna diversity circuit
TEA6101T/N2 ,TEA6101/T; Antenna diversity circuit
TEA6300 ,Sound fader control circuit
TEA6300T ,Sound fader control circuit
TEA6320T ,Sound fader control circuitapplications.2• Fast mute control via I C-bus• Fast mute control via pin2• I C-bus control for all ..
TEA6321T ,Sound fader control circuit
TDA1517
2 x 6 W stereo power amplifier
Philips Semiconductors Product specification×
6 W stereo power amplifier TDA1517; TDA1517P
FEATURES Requires very few external components High output power Fixed gain Good ripple rejection Mute/standby switch AC and DC short-circuit safe to ground and VP Thermally protected Reverse polarity safe Capability to handle high energy on outputs (VP =0V) No switch-on/switch-off plop Electrostatic discharge protection.
GENERAL DESCRIPTIONThe TDA1517 is an integrated class-B dual output
amplifierina plastic single in-line medium power package
with fin (SIL9MPF) and a plastic heat-dissipating dual
in-line package (HDIP18). The device is primarily
developed for multi-media applications.
QUICK REFERENCE DATA
ORDERING INFORMATION
Philips Semiconductors Product specification×6 W stereo power amplifier TDA1517; TDA1517P
BLOCK DIAGRAM
Philips Semiconductors Product specification×6 W stereo power amplifier TDA1517; TDA1517P
PINNING
FUNCTIONAL DESCRIPTIONThe TDA1517 contains two identical amplifiers with
differential input stages. The gainof each amplifieris fixed
at 20 dB. A special feature of the device is the
mute/standby switch which has the following features: Low standby current (<100 μA) Low mute/standby switching current
(low cost supply switch) Mute condition.
Philips Semiconductors Product specification×6 W stereo power amplifier TDA1517; TDA1517P
LIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).
THERMAL RESISTANCE
Philips Semiconductors Product specification×6 W stereo power amplifier TDA1517; TDA1517P
CHARACTERISTICS= 14.4 V; Tamb =25 °C; measured in Fig.6; unless otherwise specified.
Note The circuit is DC adjusted at VP=6to18 V and AC operating at VP= 8.5to18V.
Philips Semiconductors Product specification×6 W stereo power amplifier TDA1517; TDA1517P
CHARACTERISTICS= 14.4 V; RL =4 Ω; f=1 kHz; Tamb =25 °C; measured in Fig.6; unless otherwise specified.
Notes Output power is measured directly at the output pins of the IC. Frequency response externally fixed. Ripple rejection measuredat the output witha source impedanceof0Ω, maximum ripple amplitudeof2V (p-p) and
a frequency between 100 Hz and 10 kHz. Noise voltage measured in a bandwidth of 20Hzto20 kHz. Noise output voltage independent of Rs (VI=0 V).
Philips Semiconductors Product specification×6 W stereo power amplifier TDA1517; TDA1517P
APPLICATION INFORMATION
