IC Phoenix
 
Home ›  TT7 > TAS5162-TAS5162DKD-TAS5162DKDR,210-W Stereo Digital Amplifier Power Stage 36-HSSOP 0 to 70
TAS5162-TAS5162DKD-TAS5162DKDR Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
TAS5162TIN/a60avai210-W Stereo Digital Amplifier Power Stage
TAS5162DKDTIN/a5000avai210-W Stereo Digital Amplifier Power Stage 36-HSSOP 0 to 70
TAS5162DKDRTIN/a6818avai210-W Stereo Digital Amplifier Power Stage 36-HSSOP 0 to 70


TAS5162DKDR ,210-W Stereo Digital Amplifier Power Stage 36-HSSOP 0 to 70SLES194D–OCTOBER 2006–REVISED JULY 2007GENERAL INFORMATION (continued)MODE Selection Pins for Both ..
TAS5182 ,Digital Amplifier Power Stage Controllermaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
TAS5182 ,Digital Amplifier Power Stage ControllerMAXIMUM RATINGS(1)over operating free-air temperature range (T ) unless otherwise notedATAS5182GV t ..
TAS5182DCA ,Digital Amplifier Power Stage ControllerFEATURES Home Theater Stereo H-Bridge Controller Subwoofer Driver† Efficiency > 95%† 2x100 W ( ..
TAS5182IDCA ,Digital Amplifier Power Stage ControllerELECTRICAL CHARACTERISTICS T = 25°C, DV = 3.3 V, GV = 12 V, Frequency = 384 kHzC DD DDPARAMETER T ..
TAS5182IDCAG4 , 100−W STEREO DIGITAL AMPLIFIER POWER STAGE CONTROLLER
TC74HC125AFN , CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TC74HC125AFN , CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TC74HC138AFN , CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TC74HC138AFN , CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TC74HC151AFN , 8 - CHANNEL MULTIPLEXER
TC74HC153AFN , TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC


TAS5162-TAS5162DKD-TAS5162DKDR
210-W Stereo Digital Amplifier Power Stage
TM TAS5162 www.ti.com SLES194D–OCTOBER 2006–REVISED JULY 2007 2 x 210 Watt STEREO DIGITAL AMPLIFIER POWER STAGE This system only requires a simple passive LC FEATURES demodulation filter to deliver high-quality, • 2×160 W at 10% THD+N Into 8-Ω BTL high-efficiency audio amplification with proven EMI • 2×210 W at 10% THD+N Into 6-Ω BTL compliance. This device requires two power (1) • 1×300 W at 10% THD+N Into 4-Ω PBTL supplies, at 12 V for GVDD and VDD, and at 50V for PVDD. The TAS5162 does not require power-up • >110 dB SNR (A-Weighted, TAS5518 sequencing due to internal power-on reset. The Modulator) efficiency of this digital amplifier is greater than 90% • <0.09% THD+N at 1 W into 6 Ω, which enables the use of smaller power • Two Thermally Enhanced Package Options: supplies and heatsinks. – DKD (36-pin PSOP3) The TAS5162 has an innovative protection system integrated on-chip, safeguarding the device against a – DDV (44-pin HTSSOP) wide range of fault conditions that could damage the • High-Efficiency Power Stage (>90%) With system. These safeguards are short-circuit 80-mΩ Output MOSFETs protection, overcurrent protection, undervoltage • Power-On Reset for Protection on Power Up protection, and overtemperature protection. The Without Any Power-Supply Sequencing TAS5162 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown • Integrated Self-Protection Circuits Including during high-level music transients. A new Undervoltage, Overtemperature, Overload, programmable overcurrent detector allows the use of Short Circuit lower-cost inductors in the demodulation output filter. • Error Reporting BTL OUTPUT POWER vs SUPPLY VOLTAGE • EMI Compliant When Used With 220 Recommended System Design T = 75°C, 200 C • Intelligent Gate Drive 6 W Digital Gain = 2.5 dB 180 • Mid-Z Ramp Compatible for reduced "pop 160 noise" 140 4 W APPLICATIONS 120 • Mini/Micro Audio System 8 W 100 • DVD Receiver 80 • Home Theater 60 DESCRIPTION 40 The TAS5162 is a high performance, integrated 20 stereo digital amplifier power stage with an improved 0 protection system. The TAS5162 is capable of 15 0 5 10 20 25 30 40 45 35 50 driving a 6-Ω bridge-tied load (BTL) at up to 210 W PV - Supply Voltage (BTL) - Vrms DD per channel at THD = 10%, low integrated noise at (1) The DDV package will deliver the stated maximum power the output, low THD+N performance without clipping, levels; however, this is dependant on system and low idle power dissipation. configuration. The smaller pad area also makes the A low-cost, high-fidelity audio system can be built thermal interface to the heatsink more important. For multichannel systems that require two channels to be using a TI chipset, comprising a modulator (e.g., driven at full power with the DDV package option, it is TAS5508) and the TAS5162. PurePath Digital™ recommended to design the system so that the two channels are in two separate devices. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PurePath Digital, PowerPad are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Copyright © 2006–2007, Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. P - Output Power - W O
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED