STPS30M100SR ,100 V, 30 A power Schottky rectifierFeaturesA■ Avalanche rated■ Low VFK■ Good trade off between leakage current and forward voltage dro ..
STPS30M100ST ,100 V, 30 A power Schottky rectifierSTPS30M100S100 V, 30 A power Schottky rectifier
STPS30M80CT ,Power Schottky rectifierElectrical characteristics Table 1. Device summaryIVSymbol Value"Forward"II 2 x 15 A 2 x IO ..
STPS30SM100SR ,Power Schottky RectifierElectrical characteristics IAV"Forward"IAK2 x IO XTO-220AB narrow leadsIFSTPS30SM100STNIO XVRRMVV R ..
STPS30SM100ST ,Power Schottky RectifierFeaturesA(1)K(2)■ High current capabilityA(3)■ Avalanche ratedK■ Low forward voltage drop current■ ..
STPS3150 ,POWER SCHOTTKY RECTIFIERapplications like TV, STB, PC and DVD where lowdrop forward voltage in required to reduce powerdiss ..
T1207 , TELECOMMUNICATIONS PRODUCTS
T1211 , TELECOMMUNICATIONS PRODUCTS
T1211 , TELECOMMUNICATIONS PRODUCTS
T1215 , TELECOMMUNICATIONS PRODUCTS
T1217 , TELECOMMUNICATIONS PRODUCTS
T1218 , TELECOMMUNICATIONS PRODUCTS
STPS30M100SFP-STPS30M100SR-STPS30M100ST
100 V, 30 A power Schottky rectifier
January 2011 Doc ID 15523 Rev 3 1/10
STPS30M100S100 V , 30 A power Schottky rectifier
Features Avalanche rated Low VF Good trade off between leakage current and
forward voltage drop High frequency operation Avalanche capability specified
DescriptionThe STPS30M100S device is a single Schottky
rectifier, suited for high frequency switch mode
power supply.
Packaged in TO-220AB, TO-220FPAB, and I2 PAK
this device is intended to be used in notebook and
game station adaptors, providing in these
applications a good efficiency at both low and
high load.
Figure 1. Electrical characteristics (a) VARM and IARM must respect the reverse safe
operating area defined in Figure 14. VAR and IAR are
pulse measurements (tp < 1 µs). VR, IR, VRRM and VF,
are static characteristics
Table 1. Device summary
Characteristics STPS30M100S2/10 Doc ID 15523 Rev 3
1 Characteristics
Table 2. Absolute ratings (limiting values) Refer to Figure 14. condition to avoid thermal runaway for a diode on its own heatsink
Table 3. Thermal resistance
Table 4. Static electrical characteristics with all leads connected on board Pulse test: tp = 5 ms, δ < 2% Pulse test: tp = 380 µs, δ < 2%
dPtot
dTj--------------- 1
Rthja–()--------------------------<
STPS30M100S CharacteristicsDoc ID 15523 Rev 3 3/10 o evaluate the conduction losses use the following equation:
P = 0.475 x IF(AV) + 0.006 x IF2 (RMS)
Figure 2. Conduction losses versus average
current
Figure 3. Average forward current versus
ambient temperature (δ = 0.5)
Figure 4. Normalized avalanche power
derating versus pulse duration
Figure 5. Normalized avalanche power
derating versus junction
temperature
Figure 6. Non repetitive surge peak forward
current versus overload duration
(maximum values)
Figure 7. Relative variation of thermal
impedance junction to case versus
pulse duration
Characteristics STPS30M100S4/10 Doc ID 15523 Rev 3
Figure 8. Non repetitive surge peak forward
current versus overload duration
(maximum values) (TO-220FPAB)
Figure 9. Relative variation of thermal
impedance junction to case versus
pulse duration (TO-220FPAB)
Figure 10. Reverse leakage current versus
reverse voltage applied (typical
values)
Figure 11. Junction capacitance versus
reverse voltage applied (typical
values)
Figure 12. Forward voltage drop versus
forward current (high level)
Figure 13. Forward voltage drop versus
forward current (low level)
STPS30M100S CharacteristicsDoc ID 15523 Rev 3 5/10
Figure 14. Reverse safe operating area (tp < 1 µs and Tj < 150 °C)
Package Information STPS30M100S6/10 Doc ID 15523 Rev 3
2 Package Information Epoxy meets UL94,V0 Recommended torque: 0.4 to 0.6 N·m
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOP ACK®
specifications, grade definitions and product status are available at: .
ECOPACK® is an ST trademark.
Table 5. TO-220AB dimensions
