SN75160BDWRG4 ,Octal General-Purpose Interface Bus Transceiver 20-SOIC 0 to 70features driver outputs thatcan be operated in either the passive-pullup or 3-state mode. If talk e ..
SN75160BN ,Octal General-Purpose Interface Bus Transceivermaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage, V ..
SN75161BDW ,Octal General-Purpose Interface Bus TransceiverSN75161B, SN75162B OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVERS SLLS005B – OCTOBER 1980 – REVIS ..
SN75161BDWRG4 ,Octal General-Purpose Interface Bus Transceiver 20-SOIC 0 to 70features pnp transistor inputs for high input impedance and hysteresis of 400 mVfor increased noise ..
SN75161BN ,Octal General-Purpose Interface Bus TransceiverSN75161B, SN75162B OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVERS SLLS005B – OCTOBER 1980 – REVIS ..
SN75162B ,Octal General-Purpose Interface Bus TransceiverSN75161B, SN75162B OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVERS SLLS005B – OCTOBER 1980 – REVIS ..
SPC-814M , Mini Flat Photo Coupler
SPC-814M , Mini Flat Photo Coupler
SPC817M , Mini Flat Photo Coupler
SPC-817M , Mini Flat Photo Coupler
SPCA514A , Digital Audio USB Controller
SPCA701A , DIGITAL VIDEO ENCODER FOR VIDEOCD
SN75160B-SN75160BDW-SN75160BDWR-SN75160BDWRG4-SN75160BN
Octal General-Purpose Interface Bus Transceiver
High-Speed, Low-Power Schottky Circuitry Low Power Dissipation...72 mW Max PerChannel Fast Propagation Times... 22 ns Max High-Impedance pnp Inputs Receiver Hysteresis... 650 mV Typ Open-Collector Driver Output Option No Loading of Bus When Device Is
Powered Down (VCC = 0)
descriptionThe SN75160B 8-channel general-purpose interface bus (GPIB) transceiver is a monolithic, high-speed,
low-power Schottky device designed for two-way data communications over single-ended transmission lines.
It is designed to meet the requirements of IEEE Standard 488-1978. The transceiver features driver outputs that
can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the
characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high.
Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads
up to 48 mA of sink current.
Output glitches during power up and power down are eliminated by an internal circuit that disables both the bus
and receiver outputs. The outputs do not load the bus when VCC = 0. When combined with the SN75161B or
SN75162B management bus transceivers, the pair provides the complete 16-wire interface for the IEEE-488
bus.
The SN75160B is characterized for operation from 0°C to 70°C.
Function TablesH = high level, L = low level, X = irrelevant, Z = high impedance This is the high-impedance state of a normal 3-state output modified by the internal resistors
to VCC and GND.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
GND
GPIB
I/O Ports Terminal
I/O Ports
