SN75159D ,Dual Differential Line Driver With 3-State Outputsfeatures of theSN75158 line driver with the added feature of driver output controls. There is an in ..
SN75159N ,Dual Differential Line Driver With 3-State Outputsmaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage, V ..
SN75160B ,Octal General-Purpose Interface Bus Transceivermaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage, V ..
SN75160BDW ,Octal General-Purpose Interface Bus Transceivermaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
SN75160BDWR ,Octal General-Purpose Interface Bus Transceivermaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
SN75160BDWRG4 ,Octal General-Purpose Interface Bus Transceiver 20-SOIC 0 to 70features driver outputs thatcan be operated in either the passive-pullup or 3-state mode. If talk e ..
SPC-814M , Mini Flat Photo Coupler
SPC-814M , Mini Flat Photo Coupler
SPC817M , Mini Flat Photo Coupler
SPC-817M , Mini Flat Photo Coupler
SPCA514A , Digital Audio USB Controller
SPCA701A , DIGITAL VIDEO ENCODER FOR VIDEOCD
SN75159-SN75159D-SN75159N
Dual Differential Line Driver With 3-State Outputs
TTL Compatible High-Impedance Output State forParty-Line Applications High-Current Active-Pullup Outputs Short-Circuit Protection Dual Channels Clamp Diodes at Inputs
descriptionThe SN75159 dual differential line driver with 3-state outputs is designed to provide all the features of the
SN75158 line driver with the added feature of driver output controls. There is an individual control for each driver.
When the output control is low, the associated outputs are in a high-impedance state and the outputs can neither
drive nor load the bus. This permits many devices to be connected together on the same transmission line for
party-line applications.
The SN75159 is characterized for operation from 0°C to 70°C.
logic symbol†1EN
2EN
1Z†This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
logic diagram (positive logic)
1EN
2ENPlease be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1EN
GND
2EN
NC–No internal connection
