MPX2200AP ,0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)block diagram of the internal circuitry on the stand–alonepressure sensor chip.DIFFERENTIALVS PORT ..
MPX2200DP ,0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)**Order this documentSEMICONDUCTOR TECHNICAL DATAby MPX2200/D** * !"* * *Motorola Preferred Device ..
MPX2202GP ,Sensor
MPX4250DP ,OPERATING OVERVIEW INTEGRATED PRESSURE SENSOR 0 to 250 kPa (0 to 36.3 psi) 0.2 to 4.91 Volts OutputFeatures• Differential and Gauge Applications Only• 1.4% Maximum Error Over 0° to 85°CBASIC CHIP• I ..
MPX5010DP ,Sensor**Order this documentSEMICONDUCTOR TECHNICAL DATAby MPX5010/D"** *"** * * *!!# * !* * **"* *"# * ..
MPX5050DP ,SensorMAXIMUM RATINGSdevice connections. Do not connectto external circuitry or ground.Parametrics Symbol ..
MSU2964 , 8-Bit Micro-controller
MSV-0505 , 1 AND 2 WATT DC//DC CONVERTERS SIINGLE & MULTIIPLE OUTPUTS
MT1230 , RF SILICON AND SUBSYSTEMS SOLUTIONS FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS
MT1230 , RF SILICON AND SUBSYSTEMS SOLUTIONS FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS
MPX2200AP-MPX2200DP
0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)
--!" ! !
"
The MPX2200 and MPX2201 series device is a silicon piezoresistive pressure sensor
providing a highly accurate and linear voltage output — directly proportional to the
applied pressure. The sensor is a single monolithic silicon diaphragm with the strain
gauge and a thin–film resistor network integrated on–chip. The chip is laser trimmed for
precise span and offset calibration and temperature compensation. They are designed
for use in applications such as pump/motor controllers, robotics, level indicators, medical
diagnostics, pressure switching, barometers, altimeters, etc.
Features Temperature Compensated Over 0°C to +85°C Patented Silicon Shear Stress Strain Gauge
•±0.25% Linearity (MPX2200D) Easy to Use Chip Carrier Package Available in Absolute, Differential and Gauge Configurations
Application Examples Pump/Motor Controllers Robotics Level Indicators Medical Diagnostics Pressure Switching Barometers Altimeters
Figure 1 illustrates a block diagram of the internal circuitry on the stand–alone
pressure sensor chip.
Figure 1. Temperature Compensated Pressure Sensor SchematicVout+
Vout–
GND
VOLTAGE OUTPUT versus APPLIED DIFFERENTIAL PRESSUREThe differential voltage output of the X–ducer is directly proportional to the differential
pressure applied.
The absolute sensor has a built–in reference vacuum. The output voltage will decrease
as vacuum, relative to ambient, is drawn on the pressure (P1) side.
The output voltage of the differential or gauge sensor increases with increasing
pressure applied to the pressure (P1) side relative to the vacuum (P2) side. Similarly,
output voltage increases as increasing vacuum is applied to the vacuum (P2) side
relative to the pressure (P1) side.
Order this document
by MPX2200/D-
SEMICONDUCTOR TECHNICAL DATANOTE: Pin 1 is the notched pin.
