MPX10DP ,0 to 10 kPa (0-1.45 psi) 35 mV FULL SCALE SPAN (TYPICAL)**Order this documentSEMICONDUCTOR TECHNICAL DATAby MPX10/D* ** * * *The MPX10 series device is a ..
MPX10DP ,0 to 10 kPa (0-1.45 psi) 35 mV FULL SCALE SPAN (TYPICAL)**Order this documentSEMICONDUCTOR TECHNICAL DATAby MPX10/D* ** * * *The MPX10 series device is a ..
MPX10GP ,0 to 10 kPa (0-1.45 psi) 35 mV FULL SCALE SPAN (TYPICAL)Features• Low Cost• Patented Silicon Shear Stress Strain Gauge Design• Ratiometric to Supply Voltag ..
MPX10GP ,0 to 10 kPa (0-1.45 psi) 35 mV FULL SCALE SPAN (TYPICAL)Features• Low Cost• Patented Silicon Shear Stress Strain Gauge Design• Ratiometric to Supply Voltag ..
MPX2010D ,10 KPA ON CHIP TEMPERATURE COMPENSATED CALIBRATED SILICON PRESSURE SENSORSblock diagram of the internalcircuitry on the stand–alone pressure sensor chip.+(MPX2010DP) # ! ..
MPX2010DP ,10 KPA ON CHIP TEMPERATURE COMPENSATED CALIBRATED SILICON PRESSURE SENSORSFeaturesSMALL OUTLINE PACKAGESURFACE MOUNT• Temperature Compensated over 0°C to +85°C• Ratiometric ..
MST4411CK ,High Efficiency Red 0.52 inch (13.2 mm) Three Digit Stick DisplayFEATURES
Easy to read digits.
8' 7.00 (0.28) 3 digit common anode or cathode.
5.80(0.23) "l r Lo ..
MST4911C ,0.4 INCH (10.2MM) THREE DIGIT STICK DISPLAYFEATURES
Easy to read digits.
8' 7.00 (0.28) 3 digit common anode or cathode.
5.80(0.23) "l r Lo ..
MST4941C ,0.4 INCH (10.2MM) THREE DIGIT STICK DISPLAYFEATURES
Easy to read digits.
8' 7.00 (0.28) 3 digit common anode or cathode.
5.80(0.23) "l r Lo ..
MSU2964 , 8-Bit Micro-controller
MSV-0505 , 1 AND 2 WATT DC//DC CONVERTERS SIINGLE & MULTIIPLE OUTPUTS
MT1230 , RF SILICON AND SUBSYSTEMS SOLUTIONS FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS
MPX10DP-MPX10GP
Sensor
- -The MPX10 series device is a silicon piezoresistive pressure sensor providing a very
accurate and linear voltage output — directly proportional to the applied pressure. This
standard, low cost, uncompensated sensor permits manufacturers to design and add
their own external temperature compensating and signal conditioning networks.
Compensation techniques are simplified because of the predictability of Motorola’s single
element strain gauge design.
Features Low Cost Patented Silicon Shear Stress Strain Gauge Design Ratiometric to Supply Voltage Easy to Use Chip Carrier Package Options Differential and Gauge Options
Application Examples Air Movement Control Environmental Control Systems Level Indicators Leak Detection Medical Instrumentation Industrial Controls Pneumatic Control Systems Robotics
Figure 1 shows a schematic of the internal circuitry on the stand–alone pressure
sensor chip.
Figure 1. Uncompensated Pressure Sensor SchematicPIN 3
PIN 2
PIN 4
+ Vout
– Vout
PIN 1
VOLTAGE OUTPUT versus APPLIED DIFFERENTIAL PRESSUREThe differential voltage output of the X–ducer is directly proportional to the differential
pressure applied.
The output voltage of the differential or gauge sensor increases with increasing
pressure applied to the pressure side (P1) relative to the vacuum side (P2). Similarly,
output voltage increases as increasing vacuum is applied to the vacuum side (P2)
relative to the pressure side (P1).
Order this document
by MPX10/D-
SEMICONDUCTOR TECHNICAL DATANOTE: Pin 1 is the notched pin.
