IC Phoenix
 
Home ›  MM157 > MPC972-MPC973,LOW VOLTAGE PLL CLOCK DRIVER
MPC972-MPC973 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MPC972MOTOROLAN/a275avaiLOW VOLTAGE PLL CLOCK DRIVER
MPC973FREESCALEN/a32avaiLOW VOLTAGE PLL CLOCK DRIVER
MPC973MOTOROLAN/a37avaiLOW VOLTAGE PLL CLOCK DRIVER
MPC973MOTN/a1076avaiLOW VOLTAGE PLL CLOCK DRIVER


MPC973 ,LOW VOLTAGE PLL CLOCK DRIVERfeatures an extensive level of frequencyprogrammability between the 12 outputs as well as the input ..
MPC973 ,LOW VOLTAGE PLL CLOCK DRIVERfeatures an extensive level of frequencyprogrammability between the 12 outputs as well as the input ..
MPC973 ,LOW VOLTAGE PLL CLOCK DRIVERfeatures an extensive level of frequencyprogrammability between the 12 outputs as well as the input ..
MPC973FA ,Low voltage PLL clock driverfeatures an extensive level of frequencyprogrammability between the 12 outputs as well as the input ..
MPC974 ,LOW VOLTAGE PLL CLOCK DRIVERfeatures a separate feedback output which allowsfor a wide variety of input/output frequency multip ..
MPC974FA ,3.3V PLL clock driverfeatures a separate feedback output which allowsfor a wide variety of input/output frequency multip ..
MSP430F1491IRTDT ,16-Bit Ultra-Low-Power Microcontroller, 60 kB Flash, 2KB RAM, 2 USARTs, HW multiplier     SLAS272F − JULY 2000 − REVISED JUNE 2004 ..
MSP430F149IPAG ,16-Bit Ultra-Low-Power Microcontroller, 60 kB Flash, 2KB RAM, 12 bit ADC, 2 USARTs, HW multiplier     SLAS272F − JULY 2000 − REVISED JUNE 2004 ..
MSP430F149IPM ,16-Bit Ultra-Low-Power Microcontroller, 60 kB Flash, 2KB RAM, 12 bit ADC, 2 USARTs, HW multiplier     SLAS272F − JULY 2000 − REVISED JUNE 2004 ..
MSP430F149IPMG4 ,16-Bit Ultra-Low-Power Microcontroller, 60 kB Flash, 2KB RAM, 12 bit ADC, 2 USARTs, HW multiplier     SLAS272F − JULY 2000 − REVISED JUNE 2004 ..
MSP430F149IPMR ,16-Bit Ultra-Low-Power Microcontroller, 60 kB Flash, 2KB RAM, 12 bit ADC, 2 USARTs, HW multiplier     SLAS272F − JULY 2000 − REVISED JUNE 2004 ..
MSP430F149IPMRG4 ,16-Bit Ultra-Low-Power Microcontroller, 60 kB Flash, 2KB RAM, 12 bit ADC, 2 USARTs, HW multiplier     SLAS272F − JULY 2000 − REVISED JUNE 2004 ..


MPC972-MPC973
LOW VOLTAGE PLL CLOCK DRIVER
SEMICONDUCTOR TECHNICAL DATA -
The MPC972/973 are 3.3V compatible, PLL based clock driver
devices targeted for high performance CISC or RISC processor based
systems. With output frequencies of up to 125MHz and skews of 550ps
the MPC972/973 are ideally suited for most synchronous systems. The
devices offer twelve low skew outputs plus a feedback and sync output for
added flexibility and ease of system implementation. Fully Integrated PLL Output Frequency up to 125MHz Compatible with PowerPC and Pentium Microprocessors TQFP Packaging 3.3V VCC ± 100ps Typical Cycle–to–Cycle Jitter
The MPC972/973 features an extensive level of frequency
programmability between the 12 outputs as well as the input vs output
relationships. Using the select lines output frequency ratios of 1:1, 2:1,
3:1, 3:2, 4:1, 4:3, 5:1, 5:2, 5:3, 6:1 and 6:5 between outputs can be
realized by pulsing low one clock edge prior to the coincident edges of the
Qa and Qc outputs. The Sync output will indicate when the coincident
rising edges of the above relationships will occur. The selectability of the
feedback frequency is independent of the output frequencies, this allows
for very flexible programming of the input reference vs output frequency
relationship. The output frequencies can be either odd or even multiples
of the input reference. In addition the output frequency can be less than
the input frequency for applications where a frequency needs to be
reduced by a non–binary factor. The Power–On Reset ensures proper
programming if the frequency select pins are set at power up. If the
fselFB2 pin is held high, it may be necessary to apply a reset after
power–up to ensure synchronization between the QFB output and the
other outputs. The internal power–on reset is designed to provide this
function, but with power–up conditions being system dependent, it is
difficult to guarantee. All other conditions of the fsel pins will automatically
synchronize during PLL lock acquisition.
The MPC972/973 offers a very flexible output enable/disable scheme. This enable/disable scheme helps facilitate system
debug as well as provide unique opportunities for system power down schemes to meet the requirements of “green” class
machines. The MPC972 allows for the enabling of each output independently via a serial input port. When disabled or “frozen”
the outputs will be locked in the “LOW” state, however the internal state machines will continue to run. Therefore when “unfrozen”
the outputs will activate synchronous and in phase with those outputs which were not frozen. The freezing and unfreezing of
outputs occurs only when they are already in the “LOW” state, thus the possibility of runt pulse generation is eliminated. A
power-on reset will ensure that upon power up all of the outputs will be active. Note that all of the control inputs on the
MPC972/973 have internal pull–up resistors.
The MPC972/973 is fully 3.3V compatible and requires no external loop filter components. All inputs accept LVCMOS/LVTTL
compatible levels while the outputs provide LVCMOS levels with the capability to drive 50Ω transmission lines. For series
terminated lines each MPC972/973 output can drive two 50Ω lines in parallel thus effectively doubling the fanout of the device.
The MPC972/973 can consume significant power in some configurations. Users are encouraged to review Application Note
AN1545/D in the Timing Solutions book (BR1333/D) for a discussion on the thermal issues with the MPC family of clock drivers.
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED