IC Phoenix
 
Home ›  M › M62 > MAX5202AEUB+-MAX5203BEUB+,Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX
MAX5202AEUB+-MAX5203BEUB+ Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MAX5202AEUB+N/AN/a2500avaiLow-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX
MAX5203BEUB+ |MAX5203BEUBMAXIMN/a2avaiLow-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX


MAX5202AEUB+ ,Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAXFeaturesThe MAX5200–MAX5203 serial input, voltage-output,♦ Guaranteed 16-Bit Monotonic16-bit digita ..
MAX5203BEUB+ ,Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAXELECTRICAL CHARACTERISTICS—MAX5200/MAX5201(V = +4.75V to +5.25V, f = 10MHz (50% duty cycle), output ..
MAX5204AEUB+ ,Low-Cost, Voltage-Output, 16-Bit DACs in µMAXELECTRICAL CHARACTERISTICS—MAX5204/MAX5205(V = +4.75V to +5.25V, f = 10MHz (50% duty cycle), V = 4. ..
MAX5204BEUB ,Low-Cost, Voltage-Output, 16-Bit DACs in UMAXFeaturesThe MAX5204–MAX5207 serial input, voltage-output 16-♦ Guaranteed 16-Bit Monotonicbit digita ..
MAX5204BEUB+ ,Low-Cost, Voltage-Output, 16-Bit DACs in µMAXFeaturesThe MAX5204–MAX5207 serial input, voltage-output 16-♦ Guaranteed 16-Bit Monotonicbit digita ..
MAX5206AEUB ,Low-Cost, Voltage-Output, 16-Bit DACs in UMAXApplicationsMAX5204AEUB -40°C to +105°C 10 µMAXLow-Cost VCO/VCXO Frequency ControlMAX5204BEUB -40°C ..
MAX9705BETB+T ,2.3W, Ultra-Low-EMI, Filterless, Class D Audio AmplifierELECTRICAL CHARACTERISTICS (continued)(V = PV = V = 3.3V, V = V = 0, SYNC = GND (FFM), R = ∞, R con ..
MAX9705BETB+TC4S ,2.3W, Ultra-Low-EMI, Filterless, Class D Audio AmplifierMAX970519-3405; Rev 3; 5/092.3W, Ultra-Low-EMI, Filterless, Class D Audio Amplifier
MAX9705CEBC+T ,2.3W, Ultra-Low-EMI, Filterless, Class D Audio AmplifierFeatures♦ Filterless Amplifier Passes FCC-RadiatedThe MAX9705 3rd-generation, ultra-low EMI, mono, ..
MAX9705DETB+T ,2.3W, Ultra-Low-EMI, Filterless, Class D Audio AmplifierApplicationsEMI Spectrum DiagramCellular Phones MP3 PlayersPDAs Portable Audio50.045.040.0FCC EMI L ..
MAX9706ETX+ ,3-Channel, 2.3W, Filterless Class D Amplifiers with Active CrossoverBlock DiagramMAX9706MAX9707FULL-RANGEAUDIO INTRANSDUCERSFULL-RANGEAUDIO INTRANSDUCERSLOW-FREQUENCYT ..
MAX9708ETN ,20W/40W, Filterless, Spread-Spectrum, Mono/Stereo, Class D AmplifierBlock Diagram22MAX9708SYNCOUT SYNCOUTFS1, FS2 MAX9708FS1, FS2SYNCSYNCRIGHTCHANNELAUDIOCLASS DCLASS ..

MAX5202AEUB+-MAX5203BEUB+
Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX
General Description
The MAX5200–MAX5203 serial input, voltage-output,
16-bit digital-to-analog converters (DACs) provide
monotonic 16-bit output over temperature without any
adjustments. The MAX5200/MAX5201 operate from a
+5V single power supply featuring an internal reference
of +2.5V and an internal gain of 2, while the MAX5202/
MAX5203 operate from a +3V or +3.3V single power
supply featuring an internal reference of +1.5V and an
internal gain of 2. The MAX5200–MAX5203 DAC output
range is typically from 0 to VDD.
The MAX5200–MAX5203 feature a hardware reset input
(CLR) that, when pulled low, clears the output to zero
code 0000 hex (MAX5201/MAX5203) or resets the out-
put to midscale code 8000 hex (MAX5200/MAX5202).
The 3-wire serial interface is compatible with
SPI™/QSPI™/MICROWIRE™. All devices have a low-
power shutdown mode that reduces the supply current
consumption to 1µA.
The MAX5200–MAX5203 are available in a space-sav-
ing 10-pin µMAX®package and are guaranteed over
the extended temperature range (-40°C to +105°C).
Refer to the MAX5204–MAX5207 data sheet for external
reference versions.
Applications
Low-Cost VCO/VCXO Frequency Control
Industrial Process Control
High-Resolution Offset Adjustment
FeaturesGuaranteed 16-Bit MonotonicInternal Reference10-Pin 5mm ✕3mm µMAX PackageRail-to-Rail Output AmplifierSingle-Supply Operation
+5V (MAX5200/MAX5201)
+3V, +3.3V (MAX5202/MAX5203)Low Power Consumption: 0.8mA Shutdown Mode Reduces Supply Current to 1µASPI/QSPI/MICROWIRE-Compatible 3-Wire Serial
InterfacePower-On-Reset Sets Output to
Midscale (MAX5200/MAX5202)
Zero Scale (MAX5201/MAX5203)
MAX5200–MAX5203
Low-Cost, Voltage-Output, 16-Bit DACs with
Internal Reference in µMAX
DGND
SCLK
DIN
LDACVDD
AGND
REF
CLR
MAX5200–
MAX5203
μMAX
TOP VIEWOUT
Pin Configuration
19-2655; Rev 2; 10/04
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Selector Guide appears at end of data sheet.
Ordering Information
PARTTEMP RANGEPIN-PACKAGE
MAX5200AEUB-40°C to +105°C10 µMAX
MAX5200BEUB-40°C to +105°C10 µMAX
MAX5200ACUB 0°C to +70°C10 µMAX
MAX5201AEUB-40°C to +105°C10 µMAX
MAX5201BEUB-40°C to +105°C10 µMAX
MAX5201ACUB 0°C to +70°C10 µMAX
MAX5202AEUB-40°C to +105°C10 µMAX
MAX5202BEUB-40°C to +105°C10 µMAX
MAX5202ACUB 0°C to +70°C10 µMAX
MAX5203AEUB-40°C to +105°C10 µMAX
MAX5203BEUB-40°C to +105°C10 µMAX
MAX5203ACUB 0°C to +70°C10 µMAX
MAX5200–MAX5203
Low-Cost, Voltage-Output, 16-Bit DACs with
Internal Reference in µMAX
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VDDto AGND, DGND...............................................-0.3V to +6V
AGND to DGND.........................................……….-0.3V to +0.3V
REF, OUT to AGND.................................…-0.3V to (VDD+ 0.3V)
CLR, LDAC, SCLK, DIN, CSto DGND.......-0.3V to (VDD+ 0.3V)
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA= +70°C)
10-Pin µMAX (derate 5.6mW/°C above +70°C)........444.4mW
Operating Temperature Ranges
MAX520_CUB.....................................................0°C to +70°C
MAX520_EUB........................................…….-40°C to +105°C
Junction Temperature......................................................+150°C
Storage Temperature Range.............................-60°C to +150°C
Lead Temperature (soldering, 10s).................................+300°C
ELECTRICAL CHARACTERISTICS—MAX5200/MAX5201
(VDD= +4.75V to +5.25V, fSCLK= 10MHz (50% duty cycle), output load = 10kΩin parallel with 250pF, TA= TMINto TMAX, unless other-
wise noted. Typical values are at TA= +25°C.)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
STATIC PERFORMANCE (Note 1)
ResolutionN16Bits
MAX520_AEUB±10±20
MAX520_ACUB±10±20Integral Nonlinearity (Note 2)INL
MAX520_BEUB±20±40
LSB
MAX520_A_UB (Note 3)±1
MAX520_BEUB (0°C to +105°C) (Note 3)±1Differential Nonlinearity
(Note 2)DNL
MAX520_BEUB (-40°C to 0°C)±2
LSB
Offset ErrorInferred from measurement at 1C00 hex
and FFFF hex±3±25mV
Gain ErrorGEWithin DAC output range (Note 4)±0.01±1%FSR
Power-Supply RejectionPSRVDD = 5V ±5%, midscale input±0.06±0.5mV/V
DYNAMIC PERFORMANCE
DAC Output Range(Note 2)0 to
VDDV
Output-Voltage Slew RateSR0.6V/µs
Output Settling TimeTo ±1LSB of FS,
VSTEP = 0.25 × VREF to 0.75 × VREF25µs
Output NoiseDAC code = 8400 hex, 10kHz175nV/√Hz
DAC Glitch ImpulseMajor carry transition (code 7FFF hex to
code 8000 hex)10nV⋅s
Digital FeedthroughCode = 0000 hex; CS = VDD;
LDAC = 0; SCLK, DIN = 0 or VDD10nV⋅s
Wake-Up TimeFrom software shutdown to 90% of output
code = FFFF hex, CREF = 0.1µF50µs
Power-Up TimeFrom power applied to 90% of output
code = FFFF hex10ms
MAX5200–MAX5203
Low-Cost, Voltage-Output, 16-Bit DACs with
Internal Reference in µMAX
ELECTRICAL CHARACTERISTICS—MAX5200/MAX5201 (continued)
(VDD= +4.75V to +5.25V, fSCLK= 10MHz (50% duty cycle), output load = 10kΩin parallel with 250pF, TA= TMINto TMAX, unless other-
wise noted. Typical values are at TA= +25°C.)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
INTERNAL REFERENCE
VREF Output VoltageTA = +25°C2.482.52.52V
TA = 0°C to +70°C±15VREF TempcoTA = -40°C to +105°C±20ppm/°C
DIGITAL INPUTS (DIN, SCLK, CS, CLR, LDAC)
Input High VoltageVIH2.4V
Input Low VoltageVIL0.8V
Input HysteresisVHYST200mV
Input LeakageIINDigital inputs = 0 or VDD±1µA
Input CapacitanceCIN15pF
POWER REQUIREMENTS
Positive Power SupplyVDD4.755.25V
Positive Supply CurrentIDDAll digital inputs at 0 or VDD (Note 5)0.81.5mA
Shutdown Supply CurrentISHDNAll digital inputs at 0 or VDD110µA
TIMING CHARACTERISTICS
SCLK FrequencyfSCLK10MHz
SCLK Clock PeriodtCP100ns
SCLK Pulse Width HightCH40ns
SCLK Pulse Width LowtCL40ns
DIN Setup TimetDS40ns
DIN Hold TimetDH0ns
CS Fall to SCLK Rise Setup TimetCSS40ns
SCLK Rise to CS Rise Hold TimetCSH0ns
SCLK Rise to CS Fall IgnoretCS010ns
CS Rise to SCLK Rise IgnoretCS140ns
LDAC Pulse WidthtLDAC40ns
CS Rise to LDAC Low SetuptLDACS40ns
SCLK Fall to CS Fall IgnoretCSOL10ns
CS Pulse Width Low for ShutdowntCSWL40ns
CS Pulse Width HightCSWH100ns
MAX5200–MAX5203
Low-Cost, Voltage-Output, 16-Bit DACs with
Internal Reference in µMAX
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
STATIC PERFORMANCE (Note 1)
ResolutionN16Bits
MAX520_AEUB±10±20
MAX520_ACUB±10±20Integral Nonlinearity (Note 2)INL
MAX520_BEUB±20±40
LSB
MAX520_A_UB (Note 3)±1
MAX520_BEUB (0°C to +105°C) (Note 3)±1Differential Nonlinearity
(Note 2)DNL
MAX520_BEUB (-40°C to 0°C)±2
LSB
Offset ErrorInferred from measurement at 3800 hex and
FFFF hex±3±25mV
Gain ErrorGEWithin DAC output range (Note 4)±0.01±1.0%FSR
Power-Supply RejectionPSRVDD = 3V ±10%, midscale input±0.06±0.5mV/V
DYNAMIC PERFORMANCE
DAC Output Range(Note 2)0 to
VDDV
Voltage-Output Slew RateSR0.6V/µs
Output Settling TimeTo ±1 LSB of FS,
VSTEP = 0.25 ✕ VREF to 0.75 ✕ VREF25µs
Output NoiseCode = 8400 hex, 10kHz175nV/√Hz
Reference FeedthroughCode = 0000 hex at 100kHz, VREF = 1VP-P1mVP-P
DAC Glitch ImpulseMajor carry transition (code 7FFF hex to
code 8000 hex)10nV⋅s
Digital FeedthroughCode = 0000 hex; CS = VDD;
LDAC = 0; SCLK, DIN = 0 or VDD levels10nV⋅s
Wake-Up TimeFrom software shutdown to 90% of output
code = FFFF hex50µs
Power-Up TimeFrom power applied to 90% of output
code = FFFF hex10ms
ELECTRICAL CHARACTERISTICS—MAX5202/MAX5203
(VDD= +2.7V to +3.6V, fSCLK= 10MHz (50% duty cycle), output load = 10kΩin parallel with 250pF, TA= TMINto TMAX, unless otherwise
noted. Typical values are at TA= +25°C.)
MAX5200–MAX5203
Low-Cost, Voltage-Output, 16-Bit DACs with
Internal Reference in µMAX
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
INTERNAL REFERENCE
VREF Output VoltageTA = +25°C1.461.51.54V
TA = 0°C to +70°C±15VREF TempcoTA = -40°C to +105°C±20ppm/°C
DIGITAL INPUTS (DIN, SCLK, CS, CLR, LDAC)
Input High VoltageVIH2.1V
Input Low VoltageVIL0.6V
Input HysteresisVHYST200mV
Input LeakageIINDigital inputs = 0 or VDD±1µA
Input CapacitanceCIN15pF
POWER REQUIREMENTS
Positive Power SupplyVDD2.73.6V
Positive Supply CurrentIDDAll digital inputs at 0 or VDD (Note 5)0.81.5mA
Shutdown Supply CurrentISHDNAll digital inputs at 0 or VDD110µA
TIMING CHARACTERISTICS
SCLK FrequencyfSCLK10MHz
SCLK Clock PeriodtCP100ns
SCLK Pulse Width HightCH40ns
SCLK Pulse Width LowtCL40ns
DIN Setup TimetDS40ns
DIN Hold TimetDH0ns
CS Fall to SCLK Rise Setup TimetCSS40ns
SCLK Rise to CS Rise Hold TimetCSH0ns
SCLK Rise to CS Fall IgnoretCS010ns
CS Rise to SCLK Rise IgnoretCS140ns
LDAC Pulse WidthtLDAC40ns
CS Rise to LDAC Low SetuptLDACS40ns
SCLK Fall to CS Fall IgnoretCSOL10nsS P ul se W i d th Low for S hutd ow ntCSWL40ns
CS Pulse Width HightCSWH100ns
Note 1:Static performance tested at VDD= +5.0V (MAX5200/MAX5201) and at VDD= +3.0V (MAX5202/MAX5203).
Note 2:INL and DNL are guaranteed for outputs between 0.5V to (VDD- 0.5V).
Note 3:Guaranteed monotonic.
Note 4:VREF= 2.5V (MAX5200/MAX5201) and VREF= 1.5V (MAX5202/MAX5203).
Note 5:RL= ∞, digital inputs are at VDDor DGND.
ELECTRICAL CHARACTERISTICS—MAX5202/MAX5203 (continued)
(VDD= +2.7V to +3.6V, fSCLK= 10MHz (50% duty cycle), output load = 10kΩin parallel with 250pF, TA= TMINto TMAX, unless otherwise
noted. Typical values are at TA= +25°C.)
10010k100k
OUTPUT NOISE DENSITY
vs. FREQUENCY
MAX5200 toc07
FREQUENCY (Hz)
VOLTAGE NOISE DENSITY (nV/
DAC CODE = 8400 HEX
MAX5200–MAX5203
Low-Cost, Voltage-Output, 16-Bit DACs with
Internal Reference in µMAX
SUPPLY CURRENT vs. TEMPERATURE
MAX5200 toc01
TEMPERATURE (°C)
SUPPLY CURRENT (mA)50250-40-20
INTEGRAL NONLINEARITY
vs. CODE
MAX5200 toc02
DAC CODE
INL (LSB)
60,00050,00010,00020,00030,00040,000
-1670,000
DIFFERENTIAL NONLINEARITY
vs. CODE
MAX5200 toc03
DAC CODE
DNL (LSB)
-1.0060,00050,00010,00020,00030,00040,00070,000
GAIN ERROR
vs. TEMPERATURE
MAX5200 toc04
TEMPERATURE (°C)
GAIN ERROR (%FSR)40200-20
OFFSET ERROR
vs. TEMPERATURE
MAX5200 toc05
TEMPERATURE (°C)
OFFSET ERROR (mV)
HALF-SCALE OUTPUT SETTLING TIME
(CODE FROM 4000H TO C000H)
MAX5200 toc06a
40μs/div
OUT
1V/div
OUT
1mV/div
RLOAD = 10kΩ
CLOAD = 250pF
SMALL SIGNAL
(1mV/div)
LARGE SIGNAL
(1V/div)
HALF-SCALE OUTPUT SETTLING TIME
(CODE FROM C000H TO 4000H)
MAX5200 toc06b
40μs/div
OUT
1V/div
OUT
1mV/div
RLOAD = 10kΩ
CLOAD = 250pF
SMALL SIGNAL
(1mV/div)
LARGE SIGNAL
(1V/div)
Typical Operating Characteristics
(VDD= +5V, TA= +25°C, unless otherwise noted.)
MAX5200–MAX5203
Low-Cost, Voltage-Output, 16-Bit DACs with
Internal Reference in µMAX
SOURCE-CURRENT CAPABILITY
MAX5200 toc08
SOURCE CURRENT (mA)
OUTPUT VOLTAGE (V)2010
CODE = FFFF HEX
CODE = C000 HEX
CODE = 8000 HEX
SINK-CURRENT CAPABILITY
MAX5200 toc09
SINK CURRENT (mA)
OUTPUT VOLTAGE (V)963
CODE = 0000 HEX
CODE = 4000 HEX
MAJOR-CARRY OUTPUT GLITCH
(CODE FROM 8000H TO 7FFFH)
MAX5200 toc10
1μs/div
OUT
(AC-COUPLED,
5mV/div)
MAJOR-CARRY OUTPUT GLITCH
(CODE FROM 7FFFH TO 8000H)
MAX5200 toc11
1μs/div
OUT
(AC-COUPLED,
5mV/div)
SHUTDOWN CURRENT
vs. TEMPERATURE
MAX5200 toc12
TEMPERATURE (°C)
SHUTDOWN CURRENT (-2002040
Typical Operating Characteristics (continued)
(VDD= +5V, TA= +25°C, unless otherwise noted.)
ic,good price

TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED