MAX5173AEEE ,Low-Power / Serial / 14-Bit DACs with Force/Sense Voltage Outputfeatures include software and hardware shut-' User-Programmable Digital Output Pin Allowsdown, shut ..
MAX5174AEEE ,Low-Power, Serial, 12-Bit DACs with Voltage OutputApplicationsPin ConfigurationIndustrial Process ControlsTOP VIEWDigital Offset and Gain AdjustmentO ..
MAX5174BEEE ,Low-Power, Serial, 12-Bit DACs with Voltage Outputfeatures include software and ' SPI/QSPI/MICROWIRE-Compatible 3-Wire Serialhardware shutdown, shutd ..
MAX517ACPA ,2-Wire Serial 8-Bit DACs with Rail-to-Rail OutputsMAX517/MAX518/MAX51919-0393; Rev 0; 5/952-Wire Serial 8-Bit DACs withRail-to-Rail Outputs__________ ..
MAX517ACPA+ ,2-Wire, Serial, 8-Bit DACs with Rail-to-Rail OutputsApplications________________Functional DiagramMinimum Component Analog SystemsDigital Offset/Gain A ..
MAX517ACSA ,2-Wire Serial 8-Bit DACs with Rail-to-Rail OutputsMAX517/MAX518/MAX51919-0393; Rev 0; 5/952-Wire Serial 8-Bit DACs withRail-to-Rail Outputs__________ ..
MAX9693EPE ,Single/Dual, Ultra-Fast, ECL-Output Comparators with Latch EnableApplicationsPARTPER PACKAGE ENABLE PACKAGEHigh-Speed Line Receivers8 µ MAX,MAX9691 1 NoPeak Detecto ..
MAX9693EPE ,Single/Dual, Ultra-Fast, ECL-Output Comparators with Latch EnableMAX9691/MAX9692/MAX969319-1789; Rev 1; 10/02Single/Dual, Ultra-Fast, ECL-OutputComparators with Lat ..
MAX9693ESE ,Single/Dual, Ultra-Fast, ECL-Output Comparators with Latch EnableFeaturesThe MAX9691/MAX9692/MAX9693 are ultra-fast ECL 1.2ns Propagation Delaycomparators capable ..
MAX9694ETJ+ ,14 Programmable Gamma Reference Buffers with Four Static References for TFT LCDsfeatures. The EV kit2can also connect to a user-supplied I C interface cir-♦ 9V to 20V DC Power-Sup ..
MAX9698BCSE ,Single/Dual, Very Fast TTL Latched Output ComparatorsApplications Tech Support. Downloaded from: http://www.ic-phoenix.com/stock/MAX9686/MAX969819- ..
MAX969EEE ,Single/Dual/Quad / Micropower / Ultra-Low-Voltage / Rail-to-Rail I/O ComparatorsELECTRICAL CHARACTERISTICS(V = +1.6V to +5.5V, T = T to T , unless otherwise noted. Typical values ..
MAX5171AEEE-MAX5171BEEE-MAX5173AEEE
Low-Power / Serial / 14-Bit DACs with Force/Sense Voltage Output
General DescriptionThe MAX5171/MAX5173 low-power, serial, voltage-output,
14-bit digital-to-analog converters (DACs) feature a preci-
sion output amplifier in a space-saving 16-pin QSOP
package. The MAX5171 operates from a +5V single sup-
ply, and the MAX5173 operates from a +3V single supply.
The output amplifier’s inverting input is available to allow
specific gain configurations, remote sensing, and high
output current capability. This makes the MAX5171/
MAX5173 ideal for a wide range of applications, including
industrial process control. Both devices draw only 260µA
of supply current, which reduces to 1µA in shutdown
mode. In addition, the programmable power-up reset fea-
ture allows for a user-selectable output voltage of either 0
or midscale.
The 3-wire serial interface is compatible with SPI™,
QSPI™, and MICROWIRE™ standards. An input register
followed by a DAC register provides a double-buffered
input, allowing the input and DAC registers to be updated
independently or simultaneously with a 16-bit serial word.
Additional features include software and hardware shut-
down, shutdown lockout, a hardware clear pin, and a ref-
erence input capable of accepting DC and offset AC
signals. These devices provide a programmable digital
output pin for added functionality and a serial-data output
pin for daisy-chaining. All logic inputs are TTL/CMOS-
compatible and are internally buffered with Schmitt trig-
gers to allow direct interfacing to optocouplers.
The MAX5171/MAX5173 incorporate a proprietary on-chip
circuit that keeps the output voltage virtually “glitch free,”
limiting the glitches to a few millivolts during power-up.
Both devices are available in 16-pin QSOP packages and
are specified for the extended (-40°C to +85°C) tempera-
ture range. The MAX5171/MAX5173 are pin-compatible
upgrades to the 12-bit MAX5175/MAX5177. For 100% pin-
compatible DACs with an internal reference, see the 13-bit
MAX5132/MAX5133 and the 12-bit MAX5122/MAX5123
data sheets.
Applications
Features±1 LSB INL1µA Shutdown Current“Glitch Free” Output Voltage at Power-UpSingle-Supply Operation: +5V (MAX5171)
+3V (MAX5173)Full-Scale Output Range:
+2.048V (MAX5173, VREF= +1.25V)
+4.096V (MAX5171, VREF= +2.5V )Rail-to-Rail®Output AmplifierLow THD (-80dB) in Multiplying OperationSPI/QSPI/MICROWIRE-Compatible 3-Wire
Serial InterfaceProgrammable Shutdown Mode and Power-Up
ResetBuffered Output Capable of Driving 5kΩ|| 100pF
LoadsUser-Programmable Digital Output Pin Allows
Serial Control of External ComponentsPin-Compatible Upgrade to the 12-Bit
MAX5175/MAX5177
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Output19-1476; Rev 0; 4/99
Pin Configuration
Ordering InformationDigitally Programmable 4–20mA Current Loops
Industrial Process Control
Digital Offset and Gain Adjustment
Motion Control
Automatic Test Equipment (ATE)
Remote Industrial Controls
µP-Controlled Systems
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Output
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—MAX5171(VDD= +5.0V ±10%, VREF= +2.5V, AGND = DGND, FB = OUT, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX,
unless otherwise noted. Typical values are at TA= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VDDto AGND, DGND............................................-0.3V to +6.0V
AGND to DGND.....................................................-0.3V to +0.3V
Digital Inputs to DGND..........................................-0.3V to +6.0V
DOUT, UPO to DGND................................-0.3V to (VDD+ 0.3V)
FB, OUT, REF to AGND .............................-0.3V to (VDD+ 0.3V)
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA= +70°C)
16-pin QSOP (derate 8mW/°C above +70°C)..............667mW
Operating Temperature Range...........................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Output
ELECTRICAL CHARACTERISTICS—MAX5171 (continued)(VDD= +5V ±10%, VREF= +2.5V, AGND = DGND, FB = OUT, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX,
unless otherwise noted. Typical values are at TA= +25°C.)
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Output
ELECTRICAL CHARACTERISTICS—MAX5173(VDD= +2.7V to +3.6V, VREF= 1.25V, AGND = DGND, FB = OUT, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX,
unless otherwise noted. Typical values are at TA= +25°C).
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Output
Note 1:INL guaranteed between codes 64 and 16383.
Note 2:Offset is measured at the code that comes closest to 10mV.
Note 3:Accuracy is better than 1.0 LSB for VOUT= 10mV to VDD- 180mV. Guaranteed by PSR test on end points.
Note 4:RL= open and digital inputs are either VDDor DGND.
Note 5:INL guaranteed between codes 128 and 16383.
ELECTRICAL CHARACTERISTICS—MAX5173 (continued)(VDD= +2.7V to +3.6V, VREF= 1.25V, AGND = DGND, FB = OUT, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX,
unless otherwise noted. Typical values are at TA= +25°C).
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Output
Typical Operating Characteristics(MAX5171: VDD= +5V, VREF= 2.5V; MAX5173: VDD= +3V, VREF= 1.25V; CL = 100pF, FB = OUT, code = 3FFF hex, TA= +25°C,
unless otherwise noted.)
MAX5171
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Outputypical Operating Characteristics (continued)(MAX5171: VDD= +5V, VREF= 2.5V; MAX5173: VDD= +3V, VREF= 1.25V; CL = 100pF, FB = OUT, code = 3FFF hex, TA= +25°C,
unless otherwise noted.)
MAX5173
MAX5171/MAX5173
Low-Power, Serial, 14-Bit DACs
with Force/Sense Voltage Outputypical Operating Characteristics (continued)(MAX5171: VDD= +5V, VREF= 2.5V; MAX5173: VDD= +3V, VREF= 1.25V; CL = 100pF, FB = OUT, code = 3FFF hex, TA= +25°C,
unless otherwise noted.)
MAX5173
