IC Phoenix
 
Home ›  MM54 > MAX4514CSA-MAX4514CUK-MAX4514ESA-MAX4515CPA-MAX4515CUK-MAX4515EPA-MAX4515ESA,Low-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
MAX4514CSA-MAX4514CUK-MAX4514ESA-MAX4515CPA-MAX4515CUK Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MAX4514CSAMAXIM ?N/a36avaiLow-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
MAX4514CUKMAXIMN/a875avaiLow-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
MAX4514ESAMAXIMN/a8avaiLow-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
MAX4515CPAMAXIMN/a2500avaiLow-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
MAX4515CUKMAXIMN/a632avaiLow-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
MAX4515EPAMAXIM ?N/a40avaiLow-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
MAX4515ESAMAXIMN/a12avaiLow-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches


MAX4515CPA ,Low-Voltage, Low-On-Resistance, SPST, CMOS Analog SwitchesELECTRICAL CHARACTERISTICS—+5V Supply(V+ = +4.5V to +5.5V, V = 2.4V, V = 0.8V, T = T to T , unless ..
MAX4515CUK ,Low-Voltage, Low-On-Resistance, SPST, CMOS Analog SwitchesELECTRICAL CHARACTERISTICS—+5V Supply(V+ = +4.5V to +5.5V, V = 2.4V, V = 0.8V, T = T to T , unless ..
MAX4515CUK+T ,Low-Voltage, Low-On-Resistance, SPST, CMOS Analog SwitchesApplications♦ TTL/CMOS-Logic Compatible with +5V SupplyBattery-Operated EquipmentAudio and Video Si ..
MAX4515EPA ,Low-Voltage, Low-On-Resistance, SPST, CMOS Analog SwitchesMAX4514/MAX451519-1069; Rev 0; 6/96Low-Voltage, Low-On-Resistance,SPST, CMOS Analog Switches_______ ..
MAX4515ESA ,Low-Voltage, Low-On-Resistance, SPST, CMOS Analog SwitchesFeaturesThe MAX4514/MAX4515 are single-pole/single-throw ' Available in SOT23-5 Package(SPST), CMOS ..
MAX4515ESA+ ,Low-Voltage, Low-On-Resistance, SPST, CMOS Analog SwitchesGeneral Description ________
MAX8552ETB ,High-Speed, Wide-Input, Single-Phase MOSFET DriverApplications10 TDFNMAX8552ETB -40°C to +85°CMultiphase Buck Converters3mm x 3mmVoltage Regulator Mo ..
MAX8552ETB+T ,High-Speed, Wide-Input, Single-Phase MOSFET DriverELECTRICAL CHARACTERISTICS(V = V = V = V = 5V, V = V = V = 0V; T = -40°C to +85°C, unless otherwise ..
MAX8552EUB ,High-Speed, Wide-Input, Single-Phase MOSFET DriverELECTRICAL CHARACTERISTICS(V = V = V = V = 5V, V = V = V = 0V; T = -40°C to +85°C, unless otherwise ..
MAX8552EUB+ ,High-Speed, Wide-Input, Single-Phase MOSFET DriverFeaturesThe MAX8552 highly integrated monolithic MOSFET dri-♦ Single-Phase Synchronous Driversver i ..
MAX8552EUB+T ,High-Speed, Wide-Input, Single-Phase MOSFET DriverApplications10 TDFNMAX8552ETB -40°C to +85°CMultiphase Buck Converters3mm x 3mmVoltage Regulator Mo ..
MAX8553EEE+ ,4.5V to 28V Input, Synchronous PWM Buck Controllers for DDR Termination and Point-of-Load ApplicationsELECTRICAL CHARACTERISTICS(V = V = +12V, V = V = +2.5V, V = +5V, C = 4.7µF, C = 1µF, C = 0.22µF, V ..


MAX4514CSA-MAX4514CUK-MAX4514ESA-MAX4515CPA-MAX4515CUK-MAX4515EPA-MAX4515ESA
Low-Voltage, Low-On-Resistance, SPST, CMOS Analog Switches
_______________General Description
The MAX4514/MAX4515 are single-pole/single-throw
(SPST), CMOS, low-voltage, single-supply analog
switches with very low switch on-resistance. The
MAX4514 is normally open (NO). The MAX4515 is nor-
mally closed (NC).
These CMOS switches can operate continuously with a
single supply between +2V and +12V. Each switch can
handle rail-to-rail analog signals. The off-leakage cur-
rent maximum is only 1nA at +25°C or 20nA at +85°C.
All digital inputs have 0.8V to 2.4V logic thresholds,
ensuring TTL/CMOS-logic compatibility when using a
+5V supply.
For pin-compatible parts for use with dual supplies, see
the MAX4516/MAX4517.
________________________Applications

Battery-Operated Equipment
Audio and Video Signal Routing
Low-Voltage Data-Acquisition Systems
Communications Circuits
PCMCIA Cards
Cellular Phones
Modems
____________________________Features
Available in SOT23-5 Package+2V to +12V Single-Supply OperationGuaranteed On-Resistance:
20Ωwith +5V Supply
10Ωwith +12V Supply
Guaranteed Low Off-Leakage Currents:
1nA at +25°C
20nA at +85°C
Guaranteed Low On-Leakage Currents:
2nA at +25°C
40nA at +85°C
Low Charge Injection: 10pCFast Switching Speed: tON= 150ns, tOFF= 100nsBreak-Before-Make Operation: tON> tOFFat +5VTTL/CMOS-Logic Compatible with +5V Supply
MAX4514/MAX4515
Low-Voltage, Low-On-Resistance,
SPST, CMOS Analog Switches
________________________________________________________________Maxim Integrated Products1
__________________________________________________________Pin Configurations

19-1069; Rev 0; 6/96
& the latest literature: http://,
MAX4514/MAX4515
Low-Voltage, Low-On-Resistance,
SPST, CMOS Analog Switches_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—+5V Supply

(V+ = +4.5V to +5.5V, VINH= 2.4V, VINL= 0.8V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1:
Voltages exceeding V+ or GND on any signal terminal are clamped by internal diodes. Limit forward-diode current to
maximum current rating.
(Voltages Referenced to GND)
V+..............................................................................-0.3V, +13V
Voltage into Any Terminal (Note 1)...............-0.3V to (V+ + 0.3V)
or ±20mA (whichever occurs first)
Continuous Current into Any Terminal..............................±20mA
Peak Current, NO_ or COM_
(pulsed at 1ms,10% duty cycle)....................................±30mA
ESD per Method 3015.7..................................................>2000V
Continuous Power Dissipation (TA= +70°C)
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C)....727mW
8-Pin SO (derate 5.88mW/°C above +70°C).................471mW
5-Pin SOT23-5 (derate 7.1mW/°C above +70°C).........571mW
8-Pin CERDIP (derate 8.00mW/°C above +70°C).........640mW
Operating Temperature Ranges
MAX4514C_ _/MAX4515C_ _..............................0°C to +70°C
MAX4514E_ _/MAX4515E_ _............................-40°C to +85°C
MAX4514MJA/MAX4515MJA.........................-55°C to +125°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
MAX4514/MAX4515
Low-Voltage, Low-On-Resistance,
SPST, CMOS Analog Switches
_______________________________________________________________________________________3
ELECTRICAL CHARACTERISTICS—+5V Supply (continued)

(V+ = +4.5V to +5.5V, VINH= 2.4V, VINL= 0.8V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
ELECTRICAL CHARACTERISTICS—+12V Supply

(V+ = +11.4V to +12.6V, VINH= 5V, VINL= 0.8V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
3415ON-RESISTANCE vs.
VCOM OVER TEMPERATURE

MAX4514/15-01
VCOM (V)
ON-RESISTANCE vs. VCOM
MAX4514/15-02
VCOM (V)
CHARGE INJECTION vs. VCOM
MAX4514/15-03
VCOM (V)
Q (pC)
__________________________________________Typical Operating Characteristics

(V+ = +5V, GND = 0V, TA= +25°C, unless otherwise noted.)
MAX4514/MAX4515
Low-Voltage, Low-On-Resistance,
SPST, CMOS Analog Switches_______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS—+3V Supply

(V+ = +3V to +3.6V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
Note 2:
The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Note 3:
Leakage parameters are 100% tested at maximum-rated hot operating temperature, and are guaranteed by correlation at +25°C.
Note 4:
Guaranteed, not production tested.
Note 5:
SOT packaged parts are 100% tested at +25°C. Limits at maximum and minimum rated temperature are guaranteed by
design and correlation limits at +25°C.
MAX4514/MAX4515
Low-Voltage, Low-On-Resistance,
SPST, CMOS Analog Switches
_______________________________________________________________________________________5

ON/OFF-LEAKAGE vs. TEMPERATURE
MAX4514/15-04
TEMPERATURE (°C)
ON/OFF LEAKAGE (nA)
0.01100010,000100100,000
TOTAL HARMONIC DISTORTION
vs. FREQUENCY

MAX4514/15-06
FREQUENCY (Hz)
THD (%)1
FREQUENCY RESPONSE
MAX4514/15-05
FREQUENCY (MHz)
LOSS (dB)
PHASE (DEGREES)
TON/TOFF vs. VSUPPLY
MAX4514/15-07
V+ SUPPLY (V)
OFF
(ns)
____________________________Typical Operating Characteristics (continued)
(V+ = +5V, GND = 0V, TA= +25°C, unless otherwise noted.)
______________________________________________________________Pin Description
Note:
NO, NC, and COM pins are identical and interchangeable. Any may be considered as an input or an output; signals pass
equally well in both directions.
MAX4514/MAX4515
Low-Voltage, Low-On-Resistance,
SPST, CMOS Analog Switches_______________________________________________________________________________________
__________Applications Information
Power-Supply Considerations

The MAX4514/MAX4515 construction is typical of most
CMOS analog switches, except that they have only two
supply pins: V+ and GND. V+ and GND drive the inter-
nal CMOS switches and set their analog voltage limits.
Reverse ESD-protection diodes are internally connect-
ed between each analog-signal pin and both V+ and
GND. One of these diodes conducts if any analog sig-
nal exceeds V+ or GND.
Virtually all the analog leakage current comes from the
ESD diodes to V+ or GND. Although the ESD diodes on
a given signal pin are identical and therefore fairly well
balanced, they are reverse biased differently. Each is
biased by either V+ or GND and the analog signal. This
means their leakages will vary as the signal varies. The
differencein the two diode leakages to the V+ and GND
pins constitutes the analog-signal-path leakage current.
All analog leakage current flows between each pin and
one of the supply terminals, not to the other switch termi-
nal. This is why both sides of a given switch can show
leakage currents of the same or opposite polarity.
There is no connection between the analog-signal
paths and V+ or GND.
V+ and GND also power the internal logic and logic-
level translators. The logic-level translators convert the
logic levels to switched V+ and GND signals to drive
the analog signal gates.
Logic-Level Thresholds

The logic-level thresholds are CMOS/TTL compatible
when V+ is +5V. As V+ is raised, the level threshold
increases slightly. When V+ reaches +12V, the level
threshold is about 3.0V—above the TTL guaranteed
high-level minimum of 2.8V, but still compatible with
CMOS outputs.
Do not connect the MAX4514/MAX4515’s V+ to +3V
and then connect the logic-level pins to logic-level
signals that operate from +5V supply. Output levels
can exceed +3V and violate the absolute maximum
ratings, damaging the part and/or external circuits.
High-Frequency Performance

In 50Ωsystems, signal response is reasonably flat up to
250MHz (see Typical Operating Characteristics). Above
20MHz, the on response has several minor peaks that
are highly layout dependent. The problem is not in turn-
ing the switch on; it’s in turning it off. The off-state switch
acts like a capacitor and passes higher frequencies with
less attenuation. At 10MHz, off isolation is about -45dB
in 50Ωsystems, decreasing (approximately 20dB per
decade) as frequency increases. Higher circuit imped-
ances also make off isolation decrease. Off isolation is
about 3dB above that of a bare IC socket, and is due
entirely to capacitive coupling.
Figure 1. Charge Injection
______________________________________________Test Circuits/Timing Diagrams
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED