IC Phoenix
 
Home ›  MM50 > MAX4074BEEUK-MAX4077EUA+T,Micropower, SOT23, Rail-to-Rail, Fixed-Gain GainAmp/Open-Loop Op Amps
MAX4074BEEUK-MAX4077EUA+T Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MAX4074BEEUKMAXIM,MAXIMN/a25000avaiMicropower, SOT23, Rail-to-Rail, Fixed-Gain GainAmp/Open-Loop Op Amps
MAX4077EUA+TMAXIMN/a1478avaiMicropower, SOT23, Rail-to-Rail, Fixed-Gain GainAmp/Open-Loop Op Amps


MAX4074BEEUK ,Micropower, SOT23, Rail-to-Rail, Fixed-Gain GainAmp/Open-Loop Op AmpsApplications Ordering Information continued at end of data sheet.Note: Insert the desired gain code ..
MAX4074BJESA ,Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 49V/V, noninverting gain 50V/V, -3dB BW 50kHZ.applications, the MAX4074/MAX4076MAX4074__EUK-T -40°C to +70°C 5 SOT23-5 **are available in space-s ..
MAX4074BKESA ,Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 50V/V, noninverting gain 51V/V, -3dB BW 82kHZ.FeaturesThe MAX4074–MAX4078 GainAmp™ op amp family Internal Gain-Setting Resistors in SOT23®combin ..
MAX4074BNESA ,Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 99V/V, noninverting gain 100V/V, -3dB BW 40kHZ.ELECTRICAL CHARACTERISTICS—MAX4074/MAX4075(V = +2.5V to +5.5V, V = 0, V = V = V /2, R = ∞ to V /2, ..
MAX4075ADESA ,Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 1V/V, noninverting gain 2V/V, -3dB BW 102kHz.ELECTRICAL CHARACTERISTICS—MAX4074/MAX4075(V = +2.5V to +5.5V, V = 0, V = V = V /2, R = ∞ to V /2, ..
MAX4075AGESA ,Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 2V/V, noninverting gain 3V/V, -3dB BW 135kHz.ELECTRICAL CHARACTERISTICS—MAX4074/MAX4075 (continued)(V = +2.5V to +5.5V, V = 0, V = V = V /2, R = ..
MAX768EEE ,Low-Noise, Dual-Output, Regulated Charge Pump for GaAsFET, LCD, and VCO SuppliesELECTRICAL CHARACTERISTICS(V = +3V, SYNC = IN, SETN = SETP = GND, NSHDN = PSHDN = IN, T = -40°C to ..
MAX768EEE+ ,Low-Noise, Dual-Output, Regulated Charge Pump for GaAsFET, LCD, and VCO SuppliesFeaturesThe MAX768 low-noise, dual-output, regulated charge♦ Dual Positive/Negative Regulated Outpu ..
MAX768EEE+T ,Low-Noise, Dual-Output, Regulated Charge Pump for GaAsFET, LCD, and VCO SuppliesELECTRICAL CHARACTERISTICS(V = +3V, SYNC = IN, SETN = SETP = GND, NSHDN = PSHDN = IN, T = -40°C to ..
MAX769EEI+ ,2 or 3 Cell, Step-Up/Down, Two-Way Pager System ICApplicationsMOSFET switches for beeper or vibrator driveTwo-Way PagersAn evaluation kit for the MAX ..
MAX770 ,5V/12V/15V or Adjustable, High-Efficiency Low-IApplicationsOrdering Information continued at end of data sheet.Positive LCD-Bias Generators*Contac ..
MAX7705CSA ,レP Power-Supply Monitor with Resetapplications with microprocessors (µPs) that have a' No External ComponentsRESET input, the MAX7705 ..


MAX4074BEEUK-MAX4077EUA+T
Micropower, SOT23, Rail-to-Rail, Fixed-Gain GainAmp/Open-Loop Op Amps
General Description
The MAX4074–MAX4078 GainAmp™ op amp family
combines low-cost Rail-to-Rail®op amps with precision
internal gain-setting resistors. Factory-trimmed on-chip
resistors decrease design size, cost, and layout, and
provide 0.1% gain accuracy. Fixed inverting gains from
-0.25V/V to -100V/V or noninverting gains from +1.25V/V
to +101V/V are available. These devices operate from a
single +2.5V to +5.5V supply and consume just 34µA.
GainAmp amplifiers are optimally compensated for each
gain version, achieving gain bandwidth (GBW) products
up to 4MHz (AV= +25V/V to +101V/V). High-voltage
fault protection withstands ±17V at either input without
damage or excessive current draw (MAX4074/MAX4075
only).
Two versions are available in this amplifier family. The
MAX4076/MAX4077/MAX4078 are single/dual/quad
open-loop, unity-gain-stable op amps, and the
MAX4074/MAX4075 are single/dual fixed-gain op
amps. The input common-mode voltage range of the
open-loop amplifiers extends from 150mV below the
negative supply to within 1.2V of the positive supply.
The GainAmp outputs can swing rail-to-rail and drive a
1kΩload while maintaining excellent DC accuracy
(MAX4074/MAX4075 only). The amplifiers are stable for
capacitive loads up to 100pF.
For space-critical applications, the MAX4074/MAX4076
are available in space-saving SOT23-5 packages.
Applications

Portable Battery-Powered Equipment
Instruments, Terminals, and Bar-Code Readers
Keyless Entry
Photodiode Preamps
Smart-Card Readers
Infrared Receivers for Remote Controls
Low-Side Current-Sense Amplifiers
Features
Internal Gain-Setting Resistors in SOT23
Packages (MAX4074)
0.1% Gain Accuracy (RF/RG) (MAX4074/75)54 Standard Gains Available (MAX4074/75)Open-Loop, Unity-Gain-Stable Op Amps
(MAX4076/77/78)
Rail-to-Rail Outputs Drive 1kΩLoad (MAX4074/75)+2.5V to +5.5V Single Supply34µA Supply Current (MAX4074/75)Up to 4MHz GBW ProductFault-Protected Inputs Withstand ±17V
(MAX4074/75)
200pA max Input Bias Current (MAX4076/77/78)Stable with Capacitive Loads up to 100pF
with No Isolation Resistor
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps

TOP VIEW
MAX4074IN-
OUTVCC
VEE
IN+
SOT23-5

19-1526; Rev 1; 10/99
Pin Configurations/
Functional Diagrams
P.
GainAmp is a trademark of Maxim Integrated Products.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
Ordering Information

Pin Configurations continued at end of data sheet.
Ordering Information continued at end of data sheet.
Note:
Insert the desired gain code in the blank to complete the
part number (see the Gain Selector Guide).
**See the Gain Selector Guide for a list of preferred gains and
top marks.
8 SO
5 SOT23-5
PIN-
PACKAGETEMP. RANGE

-40°C to +70°C
-40°C to +70°CMAX4074__ESA
MAX4074__EUK-T
PART

TOP
MARK
Typical Operating Circuit appears at end of data sheet.
Gain Selector Guide appears at end of data sheet.
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—MAX4074/MAX4075

(VCC= +2.5V to +5.5V, VEE= 0, VIN+= VIN-= VCC/2, RL= ∞to VCC/2, TA= TMINto TMAX, unless otherwise noted. Typical values
are at VCC= +5V and TA= +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Supply Voltages (VCCto VEE)..................................-0.3V to +6V
Voltage Inputs (IN_)
MAX4076/MAX4077/MAX4078.....(VCC+ 0.3V) to (VEE- 0.3V)
MAX4074/MAX4075..........................................................±17V
Output Short-Circuit Duration to Either Supply (OUT_). . . . Continuous
Continuous Power Dissipation (TA= +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C) ............571mW
14-Pin TSSOP (derate 6.3mW/°C above +70°C)..........500mW
8-Pin µMAX (derate 4.1mW/°C above +70°C)..............330mW
8-Pin SO (derate 5.88mW/°C above +70°C).................471mW
14-Pin SO (derate 8.33mW/°C above +70°C)...............667mW
Operating Temperature Range...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
Supply Current (per amplifier)ICC3450µAVCC= 3V
PARAMETERSYMBOLMINTYPMAXUNITS

Inverting Input ResistanceRIN_80kΩ
VCC- VOH
Input Bias Current (Note 2)IIN+_0.81000pA
Input Offset Voltage Drift0.3µV/°C
Noninverting Input ResistanceRIN_+1000MΩ
Negative Input Voltage RangeIN_-±15V
Power-Supply Rejection RatioPSRR7096dB
Supply Voltage RangeVCC2.55.5V
Input Offset VoltageVOS0.23.5mV
Closed-Loop Output ImpedanceROUT0.2Ω
VCC- VOHOutput Short-Circuit Current-22mA
VOL- VEE
Output Voltage Swing (Note 4)
100600= 1kΩ
VCC- VOH25150
VOL- VEE
Positive Input Voltage RangeIN_+80RL= 10kΩ
VOL- VEE
CONDITIONS
≥+25V/V
Shorted to VCC< +25V/V
Shorted to VEE
VEE-VCC-
Guaranteed by functional test (Note 3)
VCC= 2.5V to 5.5VGuaranteed by functional test (Note 3)
Guaranteed by PSRR test
VCC= 5V= 1MΩ= 1MΩ
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps
ELECTRICAL CHARACTERISTICS—MAX4076/MAX4077/MAX4078

(VCC= +2.5V to +5.5V, VEE= 0, VIN+= VIN-= VCC/2, RL= ∞to VCC/2, TA= TMINto TMAX, unless otherwise noted. Typical values
are at VCC= +5V and TA= +25°C.) (Note 1)
ELECTRICAL CHARACTERISTICS—MAX4074/MAX4075 (continued)

(VCC= +2.5V to +5.5V, VEE= 0, VIN+= VIN-= VCC/2, RL= ∞to VCC/2, TA= TMINto TMAX, unless otherwise noted. Typical values
are at VCC= +5V and TA= +25°C.) (Note 1)
-3dB BandwidthBW (-3dB)
kHz= +3V/V= +5V/V= +10V/V= +25V/V
200AV= +1.25V/V
Input Noise Current Density500fA/√Hz
Capacitive Load StabilityCLOAD500pF
DC Gain Accuracy
f = 5kHz
No sustained oscillations
PARAMETERSYMBOLMINTYPMAXUNITS

Power-Up Time9ms
Slew RateSR100V/ms
Settling Time (to 0.01%)60µs
Input Voltage Noise Densityen150nV/√Hz
CONDITIONS

Output settling to 1%
VOUT= 4V step
VOUT= 4V step
f = 5kHz (Note 5)
1.2= +25°C(VEE+ 25mV) < VOUT
< (VCC- 25mV), = 1MΩ(Note 6)TA= TMINto TMAX
Supply Current (per amplifier)ICC4055µAVCC= 3V
PARAMETERSYMBOLMINTYPMAXUNITS

Input Bias Current (Note 2)IIBIAS1200pA
Input Offset Voltage Drift1.5µVµV/°C
Power-Supply Rejection RatioPSRR7095dB
Supply Voltage RangeVCC2.55.5V9360
Input Offset VoltageVOS1.23.5mVmV
Closed-Loop Output ImpedanceROUT0.2Ω
4.5Output Short-Circuit Current20mA117
Large-Signal Voltage GainAVOLdB
0.25V < VOUT< (VCC- 0.3V), RL= 5kΩ95
Common-Mode Input Voltage
RangeIVR
0.25V < VOUT< (VCC- 0.3V), RL= 10kΩ
CONDITIONS
= +1V/V
Shorted to VCC
Shorted to VEE
0.15VCC -
VCC= 2.5V to 5.5VGuaranteed by CMRR
Guaranteed by PSRR test
VCC= 5V
0.05V < VOUT< (VCC- 0.1V), RL= 1MΩ= 1MΩ
Input Offset CurrentIOS±0.4pA
Common-Mode Rejection RatioCMRR7095dB(VCC- 1.2V) ≥VCM≥-0.15V
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps
ELECTRICAL CHARACTERISTICS—MAX4076/MAX4077/MAX4078 (continued)

(VCC= +2.5V to +5.5V, VEE= 0, VIN+= VIN-= VCC/2, RL= ∞to VCC/2, TA= TMINto TMAX, unless otherwise noted. Typical values
are at VCC= +5V and TA= +25°C.) (Note 1)= 1MΩ0.222.5
CONDITIONS

VOL- VEE= 10kΩ750VOL- VEE50VCC- VOH= 5kΩ
VOH/VOLOutput Voltage Swing
VOL- VEE
0.232.5VCC- VOH
100100VCC- VOH
kHzGBWGain-Bandwidth Product
UNITSMINTYPMAXSYMBOLPARAMETER

VOUT= 4V stepV/msSRSlew Rate90
VOUT= 4V stepµsSettling Time (to 0.01%)69
f = 5kHznV/√HzenInput Voltage Noise Density110
f = 5kHzfA/√HzInput Noise Current Density1.1
No sustained oscillations, AV= +1V/VpFCLOADCapacitive Load Stability100
Note 1:
All devices are 100% production tested at TA= +25°C. All temperature limits are guaranteed by design.
Note 2:
Guaranteed by design.
Note 3:
The input common-mode range for IN_+ is guaranteed by a functional test. A similar test is done on the IN_- input. See the
Applications Informationsection for more information on the input voltage range of the GainAmps.
Note 4:
For AV= -0.5V/V and AV= -0.25V/V, the output voltage swing may be limited by the input voltage range.
Note 5:
Includes noise from on-chip resistors.
Note 6:
The gain accuracy test is performed with the GainAmps in the noninverting configuration. The output voltage swing is limit-
ed by the input voltage range for certain gains and supply voltage conditions. For situations where theoutput voltage swing
is limited by the valid input range, the output limits are adjusted accordingly.
Output settling to 1%msPower-Up Time101M100k10k
SMALL-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 tocc1-2
FREQUENCY (Hz)
GAIN (dB)AV = +2.25V/V
AV = +1.25V/V
VOUT = 100mVp-p31M10k100k
SMALL-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 tocc3-4
FREQUENCY (Hz)
GAIN (dB)
AV = +4V/V
AV = +2.5V/V
VOUT = 100mVp-p31M10k100k
SMALL-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 tocc5-6
FREQUENCY (Hz)
GAIN (dB)AV = +9V/V
AV = +5V/V
VOUT = 100mVp-p
Typical Operating Characteristics

(VCC= +5.0V, RL= 100kΩto VCC/2, TA= +25°C, unless otherwise noted.)
MAX4074/MAX4075
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps
1M100k10k
SMALL-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc04
FREQUENCY (Hz)
GAIN (dB)AV = +21V/V
AV = +10V/V
VOUT = 100mVp-p31M100k10k
SMALL-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc05
FREQUENCY (Hz)
GAIN (dB)
AV = +25V/V
AV = +50V/V
VOUT = 100mVp-p31M100k10k
SMALL-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc06
FREQUENCY (Hz)
GAIN (dB)
AV = +51V/V
AV = +101V/V
VOUT = 100mVp-p1M100k10k
LARGE-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc07
FREQUENCY (Hz)
GAIN (dB)
AV = +1.25V/V
AV = +2.25V/V
VOUT = 1Vp-p31M100k10k
LARGE-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc08
FREQUENCY (Hz)
GAIN (dB)
AV = +2.5V/V
AV = +4V/V
VOUT = 1Vp-p31M100k10k
LARGE-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc09
FREQUENCY (Hz)
GAIN (dB)
AV = +5V/V
AV = +9V/V
VOUT = 1Vp-p
Typical Operating Characteristics

(VCC= +5.0V, RL= 100kΩto VCC/2, TA= +25°C, unless otherwise noted.)
MAX4074/MAX4075
1M100k10k
LARGE-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc10
FREQUENCY (Hz)
GAIN (dB)
AV = +10V/V
AV = +21V/V
VOUT = 1Vp-p31M100k10k
LARGE-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc11
FREQUENCY (Hz)
GAIN (dB)
AV = +25V/V
AV = +50V/V
VOUT = 1Vp-p31M100k10k
LARGE-SIGNAL GAIN vs. FREQUENCY

MAX4074-8 toc12
FREQUENCY (Hz)
GAIN (dB)
AV = +51V/V
AV = +101V/V
VOUT = 1Vp-p
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps

100100k10k1k
TOTAL HARMONIC DISTORTION
vs. FREQUENCY

MAX4074-8 toc25
FREQUENCY (Hz)
THD (dB)
AV = +1.25V/V
AV = +3V/V
VOUT = 1Vp-p
AV = +10V/V
100100k10k1k
TOTAL HARMONIC DISTORTION
vs. FREQUENCY

MAX4074-8 toc26
FREQUENCY (Hz)
THD (dB)
AV = +25V/V
AV = +51V/V
VOUT = 1Vp-p
TOTAL HARMONIC DISTORTION
vs. OUTPUT VOLTAGE SWING
MAX4074-8 toc27
VOLTAGE SWING (Vp-p)
THD (dB)
AV = +3V/V
AV = +10V/V
AV = +1.25V/V
f = 10kHz
TOTAL HARMONIC DISTORTION
vs. OUTPUT VOLTAGE SWING
MAX4074-8 toc28
VOLTAGE SWING (Vp-p)
THD (dB)
AV = +51V/V
AV = +25V/V
f = 10kHz
10001k10k100k101001M10M
VOLTAGE NOISE DENSITY
vs. FREQUENCY

MAX4074-8 toc29
FREQUENCY (Hz)
VOLTAGE NOISE (nV/
Hz)AV = +3V/V
AV = +1.25V/V
AV = +10V/V
10001k10k100k101001M10M
VOLTAGE NOISE DENSITY
vs. FREQUENCY

MAX4074-8 toc30
FREQUENCY (Hz)
AV = +25V/V
AV = +51V/V
VOLTAGE NOISE (nV/
Hz)ypical Operating Characteristics (continued)
(VCC= +5.0V, RL= 100kΩto VCC/2, TA= +25°C, unless otherwise noted.)
MAX4074/MAX4075

0.11k10k100k1010010M1M
CURRENT NOISE DENSITY
vs. FREQUENCY

MAX4074 TOC31
FREQUENCY (Hz)
CURRENT NOISE DENSITY (fA/
Hz)
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps

10μs/div
INPUT
OUTPUT
50mV/div
AV = +1.25V/V
OUTPUT
50mV/div
AV = +3V/V
OUTPUT
50mV/div
AV = +5V/V
OUTPUT
50mV/div
AV = +10V/V
OUTPUT
50mV/div
AV = +25V/V
OUTPUT
50mV/div
AV = +51V/V
SMALL-SIGNAL PULSE RESPONSE

MAX4074 TOC36
Typical Operating Characteristics (continued)

(VCC= +5.0V, RL= 100kΩto VCC/2, TA= +25°C, unless otherwise noted.)
10μs/div
INPUT
OUTPUT
500mV/div
AV = +1.25V/V
OUTPUT
500mV/div
AV = +3V/V
OUTPUT
500mV/div
AV = +5V/V
OUTPUT
500mV/div
AV = +10V/V
OUTPUT
500mV/div
AV = +25V/V
OUTPUT
500mV/div
AV = +51V/V
LARGE-SIGNAL PULSE RESPONSE

MAX4074 TOC35
MAX4074/MAX4075
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps

INPUT OFFSET VOLTAGE vs. TEMPERATURE
MAX4074/5-toc35
TEMPERATURE (°C)
INPUT OFFSET VOLTAGE (
VCC - VEE = 5.5V
VCC - VEE = 2.5V
INPUT BIAS CURRENT vs. TEMPERATURE
MAX4074/5-toc36
TEMPERATURE (°C)
INPUT BIAS CURRENT (pA)
VCC - VEE = 5.5V
VCC - VEE = 2.5V
VCC - VEE = 2.5V
VCC - VEE = 5.5V
MAX4074/4075
MAX4076/77/78
VOH AND VOL vs. TEMPERATURE
(VCC - VEE = 2.5V)
MAX4074/5-toc37
TEMPERATURE (°C)
VOLTAGE (mV)
VOH, RL = 1kΩ
VOH, RL = 10kΩ
VOL, RL = 10kΩ
VOL, RL = 1kΩ
VOH, RL = 100kΩ
VOL, RL = 100kΩ
VOH AND VOL vs. TEMPERATURE
(VCC - VEE = 5.5V)
MAX4074/5-toc38
TEMPERATURE (°C)
VOLTAGE (mV)
VOH, RL = 1kΩ
VOH, RL = 10kΩ
VOL, RL = 10kΩ
VOL, RL = 1kΩ
VOH, RL = 100kΩ
VOL, RL = 100kΩ
SUPPLY CURRENT vs. TEMPERATURE
MAX4074/5-toc39
TEMPERATURE (°C)
SUPPLY CURRENT (
VCC - VEE = 5.5V
VCC - VEE = 2.5V
VCC - VEE = 4.0V
VCC - VEE = 3.0V
Typical Operating Characteristics (continued)

(VCC= +5.0V, RL= 100kΩto VCC/2, TA= +25°C, unless otherwise noted.)
OUTPUT VOLTAGE SWING
vs. RLOAD
MAX4074 TOC34
RLOAD (kΩ)
OUTPUT SWING (mV)
VCC - VOH
VOL - VEE
1001k10k100k1M
OUTPUT IMPEDANCE
vs. FREQUENCY

MAX4074TOC33
FREQUENCY (Hz)
OUTPUT IMPEDANCE (
100100k10k1k
POWER-SUPPLY REJECTION
vs. FREQUENCY

MAX4074 TOC32
FREQUENCY (Hz)
PSR (dB)
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps
1M10M100k10k
SMALL-SIGNAL GAIN vs. FREQUENCY

MAX4076/7/8 toc1
FREQUENCY (Hz)
GAIN (dB)1M10M100k10k
LARGE-SIGNAL GAIN vs. FREQUENCY

MAX4076- 8 toc2
FREQUENCY (Hz)
GAIN (dB)1k10k100k101001M10M
VOLTAGE NOISE vs. FREQUENCY

MAX4076-8 toc3
FREQUENCY (Hz)
VOLTAGE NOISE (nV/
Hz)
0.11k10k100k101001M10M
CURRENT NOISE vs. FREQUENCY

MAX4076-8 toc4
FREQUENCY (Hz)
CURRENT NOISE (pA/
Hz)
100100k10k1k
TOTAL HARMONIC DISTORTION
vs. FREQUENCY

MAX4076-8 toc5
FREQUENCY (Hz)
THD (dB)
AV = +1V/V
-1301M10k100k
MAX4077
CROSSTALK vs. FREQUENCY

MAX4076-8 toc6
FREQUENCY (Hz)
CROSSTALK (dB)
-1101M10k100k
MAX4078
ALL HOSTILE CROSSTALK vs. FREQUENCY

MAX4076-8 toc7
FREQUENCY (Hz)
CROSSTALK (dB)
THREE AMPLIFIERS DRIVEN,
ONE OUTPUT MEASURED.
-2001k10k100k1010010M1M
GAIN AND PHASE
vs. FREQUENCY

MAX4076-8 toc8
FREQUENCY (Hz)
GAIN (dB)
PHASE (degrees)
PHASE
GAIN
-1001k10k100k1010010M1M
COMMON-MODE REJECTION
vs. FREQUENCY

MAX4076-8 toc9
FREQUENCY (Hz)
CMR (dB)ypical Operating Characteristics (continued)
(VCC= +5.0V, RL= 100kΩto VCC/2, TA= +25°C, unless otherwise noted.)
MAX4076/MAX4077/MAX4078
MAX4074–MAX4078
Micropower, SOT23, Rail-to-Rail,
Fixed-Gain, GainAmp/Open-Loop Op Amps
Pin Description
_______________Detailed Description

Maxim’s GainAmp fixed-gain amplifiers combine a low-
cost rail-to-rail op amp with internal gain-setting resis-
tors. Factory-trimmed on-chip resistors provide 0.1%
gain accuracy while decreasing design size, cost, and
layout. There are two versions in this amplifier family:
single/dual/quad open-loop, unity-gain-stable devices
(MAX4076/MAX4077/MAX4078), and single/dual fixed-
gain devices (MAX4074/MAX4075). All amplifiers fea-
ture rail-to-rail outputs and drive a 10kΩload while
maintaining excellent DC accuracy.
Open-Loop Op Amps

The single/dual/quad MAX4076/MAX4077/MAX4078 are
low-power, open-loop op amps with rail-to-rail outputs.
These devices are compensated for unity-gain stability
and feature a GBW product of 230kHz. The common-
mode range extends from 150mV below the negative
rail to within 1.2V of the positive rail. These high-perfor-
mance op amps serve as the core for this family of
GainAmp fixed-gain amplifiers. Although the -3dBband-
width will not correspond to that of a fixed-gain amplifier
in higher gain configurations, these open-loop op amps
can be used to prototype designs.
Internal Gain-Setting Resistors

Maxim’s proprietary laser trimming techniques allow
RF/RGvalues (Figure 1) that produce many different
gain configurations. These GainAmp fixed-gain ampli-
fiers feature a negative-feedback resistor network that
is laser trimmed to provide a gain-setting feedback
ratio (RF/RG) with 0.1% typical accuracy. The standard
op amp pinouts allow the GainAmp fixed-gain ampli-
fiers to plug directly into existing board designs, easily
replacing op amps-plus-resistor gain blocks.
OUT
AV = -RF
RGRF
IN-
IN+
VCC
VEE
AV = 1 + RF
RG
Figure 1. Internal Gain-Setting Resistors
FUNCTION

Positive SupplyVCC5
No Connection. Not internally connected.N.C.—
Inverting Amplifier InputIN_-4
Noninverting Amplifier InputIN_+3
Negative Supply or GroundVEE2
Amplifier OutputOUT_1
1, 5, 8
2, 6
3, 5
1, 7
2, 6, 9,13
3, 5,10, 12
1, 7,8,14
MAX4075
MAX4077MAX4078
µMAX/SOSO/TSSOPSOT23
NAME
PIN
MAX4074/MAX4076
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED