IC Phoenix
 
Home ›  MM34 > MAX2015EUA,0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller
MAX2015EUA Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MAX2015EUAMAXN/a8avai0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller


MAX2015EUA ,0.1GHz to 3GHz, 75dB Logarithmic Detector/ControllerApplications Ordering Information continued at end of data sheet.Functional DiagramVCC1, 4POWER DET ..
MAX2016ETI ,2.7 V to 5.25 V, LF-to-2.5 GHz dual logarithmic detector/controller for power, gain, and VSWR measurementFeaturesThe MAX2016 dual logarithmic detector/controller is a ♦ Complete Gain and VSWR Detector/Con ..
MAX2016ETI+ ,LF-to-2.5GHz Dual Logarithmic Detector/Controller for Power, Gain, and VSWR MeasurementsFeaturesThe MAX2016 dual logarithmic detector/controller is a ♦ Complete Gain and VSWR Detector/Con ..
MAX2016ETI+D ,2.7 V to 5.25 V, LF-to-2.5 GHz dual logarithmic detector/controller for power, gain, and VSWR measurementApplicationsRF/IF Power Amplifier (PA) Linearization28 27 26 25 24 23 22FA1 1 21 FB1V 2CC 20 VCCRFI ..
MAX2016ETI+T ,LF-to-2.5GHz Dual Logarithmic Detector/Controller for Power, Gain, and VSWR MeasurementsApplicationsRF/IF Power Amplifier (PA) Linearization28 27 26 25 24 23 22FA1 1 21 FB1V 220 VCC CCRFI ..
MAX201CPD ,+5V RS-232 Transceivers with 0.1uF External CapacitorsGeneral Description The MAX200-MAX211/MAX213 transceivers are designed for RS-232 and V.28 comm ..
MAX5048BAUT ,7.6A, 12ns, SOT23/TDFN MOSFET DriverELECTRICAL CHARACTERISTICS(V+ = +12V, T = -40°C to +125°C, unless otherwise noted. Typical values a ..
MAX5048BAUT ,7.6A, 12ns, SOT23/TDFN MOSFET DriverELECTRICAL CHARACTERISTICS(V+ = +12V, T = -40°C to +125°C, unless otherwise noted. Typical values a ..
MAX5048BAUT#TG16 ,7.6A, 12ns, SOT23/TDFN MOSFET DriverApplicationsV /2CCMAX5048AAUT-T -40°C to +125°C 6 SOT23 ABECCMOSPower MOSFET SwitchingMAX5048BAUT-T ..
MAX5048BAUT+T ,7.6A, 12ns, SOT23/TDFN MOSFET DriverFeaturesThe MAX5048A/MAX5048B are high-speed MOSFET ♦ Independent Source-and-Sink Outputs fordriver ..
MAX504CPD ,5V, Low-Power, Voltage-Output, Serial 10-Bit DACsFeaturesThe MAX504/MAX515 are low-power, voltage-output,' Operate from Single +5V Supply10-bit digi ..
MAX504CPD ,5V, Low-Power, Voltage-Output, Serial 10-Bit DACsGeneral Description _______


MAX2015EUA
0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller
General Description
The MAX2015 complete multistage logarithmic amplifier
is designed to accurately convert radio-frequency (RF)
signal power in the 0.1GHz to 3GHz frequency range to
an equivalent DC voltage. The outstanding dynamic
range and precision over temperature of this log ampli-
fier make it particularly useful for a variety of base sta-
tion and other wireless applications, including
automatic gain control (AGC), transmitter power mea-
surements, and received signal strength indication
(RSSI) for terminal devices.
The MAX2015 can also be operated in a controller
mode where it measures, compares, and controls the
output power of a variable-gain amplifier as part of a
fully integrated AGC loop.
This logarithmic amplifier provides much wider mea-
surement range and superior accuracy compared to
controllers based on diode detectors, while achieving
excellent temperature stability over the full -40°C to
+85°C operating range.
Applications

AGC Measurement and Control
RF Transmitter Power Measurement
RSSI Measurements
Cellular Base Station, WLAN, Microwave Link,
Radar, and other Military Applications
Features
Complete RF Detector/Controller0.1GHz to 3GHz Frequency RangeExceptional Accuracy Over TemperatureHigh Dynamic Range2.7V to 5.25V Supply Voltage Range*Scaling Stable Over Supply and Temperature
Variations
Controller Mode with Error OutputShutdown Mode with Typically 1μA of Supply
Current
Available in 8-Pin μMAX® and TDFN Packages
MAX2015
0.1GHz to 3GHz, 75dB Logarithmic
Detector/Controller
Ordering Information

MAX2015
7dB
50Ω
20kΩ
SET
OUT8INHI
INLO3
1, 4
PWDN5
20kΩ
7dB
7dB
VCC
GND
POWER DETECTORS
OFFSET AND COMMON-
MODE AMP
Functional Diagram

19-2998; Rev 2; 2/07
EVALUATION KIT
AVAILABLE
Pin Configuration appears at end of data sheet.
PARTTEMP RANGEPIN-
PACKAGE
PKG
CODE

MAX2015EUA-40°C to +85°C8 µMAXU8-1
MAX2015EUA-T-40°C to +85°C8 µMAXU8-1
*See Power-Supply Connections section.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
T = Tape-and-reel.
+Denotes lead-free and RoHS compliance.
*EP = Exposed paddle.
Ordering Information continued at end of data sheet.
MAX2015
0.1GHz to 3GHz, 75dB Logarithmic
Detector/Controller
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS

(MAX2015 typical application circuit (Figure 1), VS= +3.3V, fRF= 100MHz to 3000MHz, R1 = 0Ω, R4 = 0Ω, RL= 10kΩ, TA= -40°C to
+85°C, unless otherwise noted. Typical values are at TA= +25°C, unless otherwise noted.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VCC(Pins, 1, 4) to GND.......................................-0.3V to +5.25V
SET, PWDN to GND....................................-0.3V to (VCC+ 0.3V)
Input Power Differential INHI, INLO................................+23dBm
Input Power Single Ended (INHI or INLO grounded).....+19dBm
Continuous Power Dissipation (TA= +70°C)
8-Pin µMAX (derate 4.5mW/°C above +70°C).............362mW
8-Pin TDFN (derate 18.5mW/°C above +70°C).........1480mW
Operating Temperature Range...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10s).................................+300°C
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
POWER SUPPLY

R4 = 75Ω ±1%, PWDN must be
connected to GND4.755.25Supply VoltageVS
R4 = 0Ω2.73.6
TA = +25°C, VS = 5.25V,
R4 = 75Ω17.3Supply CurrentICC
TA = +25°C17.320.5
Supply Current Variation with TempICCTA = -40°C to +85°C0.05mA/°C
Shutdown CurrentICCVPWDN = VCC1µA
CONTROLLER REFERENCE (SET)

SET Input Voltage Range0.5 to 1.8V
SET Input Impedance40kΩ
DETECTOR OUTPUT (OUT)

Source Current4mA
Sink Current450µA
Minimum Output VoltageVOUT(MIN)0.5V
Maximum Output VoltageVOUT(MAX)1.8V
MAX2015
0.1GHz to 3GHz, 75dB Logarithmic
Detector/Controller
AC ELECTRICAL CHARACTERISTICS

(MAX2015 typical application circuit (Figure 1), VS= +3.3V, fRF= 100MHz to 3000MHz, R1 = 0Ω, R4 = 0Ω, RL= 10kΩ, TA= -40°C to
+85°C, unless otherwise noted. Typical values are at TA= +25°C, unless otherwise noted.) (Note 1)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS

RF Input Frequency RangefRF0.1 to 3GHz
Return LossS11-15dB
Large-Signal Response TimePIN = no signal to 0dBm,
±0.5dB settling accuracy150ns
RSSI MODE—0.1GHz

RF Input Power Range(Note 2)-65 to +5dBm
±3dB Dynamic RangeTA = -40°C to +85°C (Note 3)70dB
Range Center-30dBm
Temp Sensitivity when TA > +25°CTA = +25°C to +85°C,
PIN = -25dBm+0.0083dB/°C
Temp Sensitivity when TA < +25°CTA = -40°C to +25°C,
PIN = -25dBm-0.0154dB/°C
Slope(Note 4)19mV/dB
Typical Slope VariationTA = -40°C to +85°C-4µV/°C
Intercept(Note 5)-100dBm
Typical Intercept VariationTA = -40°C to +85°C0.03dBm/°C
RSSI MODE—0.9GHz

RF Input Power Range(Note 2)-65 to +5dBm
±3dB Dynamic RangeTA = -40°C to +85°C (Note 3)70dB
Range Center-30dBm
Temp Sensitivity when TA > +25°CTA = +25°C to +85°C,
PIN = -25dBm±0.0083dB/°C
Temp Sensitivity when TA < +25°CTA = -40°C to +25°C,
PIN = -25dBm-0.0154dB/°C
Slope(Note 4)18.1mV/dB
Typical Slope VariationTA = -40°C to +85°C-4µV/°C
Intercept(Note 5)-97dBm
Typical Intercept VariationTA = -40°C to +85°C0.02dBm/°C
RSSI MODE—1.9GHz

RF Input Power Range(Note 2)-55 to +5dBm
±3dB Dynamic RangeTA = -40°C to +85°C (Note 3)60dB
Range Center-25dBm
Temp Sensitivity when TA > +25°CTA = +25°C to +85°C,
PIN = -25dBm±0.0033dB/°C
Temp Sensitivity when TA < +25°CTA = -40°C to +25°C,
PIN = -25dBm-0.0138dB/°C
Slope(Note 4)18mV/dB
Typical Slope VariationTA = -40°C to +85°C-4.8µV/°C
MAX2015
0.1GHz to 3GHz, 75dB Logarithmic
Detector/Controller
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS

Intercept(Note 5)-83dBm
Typical Intercept Variation TA = -40°C to +85°C0.03dBm/°C
RSSI MODE—2.5GHz

RF Input Power Range(Note 2)-45 to -5dBm
±3dB Dynamic RangeTA = -40°C to +85°C (Note 3)40dB
Range Center-25dBm
Temp Sensitivity when TA > +25°CTA = +25°C to +85°C,
PIN = -25dBm-0.0083dB/°C
Temp Sensitivity when TA < +25°CTA = -40°C to +25°C,
PIN = -25dBm-0.0083dB/°C
Slope(Note 4)16.8mV/dB
Typical Slope VariationTA = -40°C to +85°C-8µV/°C
Intercept(Note 5)-81dBm
Typical Intercept VariationTA = -40°C to +85°C0.03dBm/°C
Note 1:
The MAX2015 is guaranteed by design for TA= -40°C to +85°C, as specified.
Note 2:
Typical minimum and maximum range of the detector at the stated frequency.
Note 3:
Dynamic range refers to the range over which the error remains within the stated bounds. The error is calculated at -40°C
and +85°C, relative to the curve at +25°C.
Note 4:
The slope is the variation of the output voltage per change in input power. It is calculated by fitting a root-mean-square
(RMS) straight line to the data indicated by RF input power range.
Note 5:
The intercept is an extrapolated value that corresponds to the output power for which the output voltage is zero.
It is calculated by fitting an RMS straight line to the data.
AC ELECTRICAL CHARACTERISTICS (continued)

(MAX2015 typical application circuit (Figure 1), VS= +3.3V, fRF= 100MHz to 3000MHz, R1 = 0Ω, R4 = 0Ω, RL= 10kΩ, TA= -40°C to
+85°C, unless otherwise noted. Typical values are at TA= +25°C, unless otherwise noted.) (Note 1)
MAX2015
0.1GHz to 3GHz, 75dB Logarithmic
Detector/Controller
OUTPUT VOLTAGE
vs. INPUT POWER

MAX2015 toc01
INPUT POWER (dBm)
OUTPUT VOLTAGE (V)-10-60-50-40-30-20
fIN = 0.1GHz
TA = +85°C
TA = +25°C
TA = -40°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc02
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50-60
fIN = 0.1GHz
NORMALIZED TO DATA AT +25°C
TA = +85°C
TA = +25°C
TA = -40°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc03
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50-60
VCC = 2.7V
VCC = 3.0VVCC = 3.3V
VCC = 3.6V
fIN = 0.1GHz, TA = +85°C
NORMALIZED TO DATA AT +25°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc04
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50-60
VCC = 3.3VVCC = 3.6V
VCC = 2.7V
VCC = 3.0V
fIN = 0.1GHz, TA = -40°C
NORMALIZED TO DATA AT +25°C
OUTPUT VOLTAGE
vs. INPUT POWER

MAX2015 toc05
INPUT POWER (dBm)
OUTPUT VOLTAGE (V)-10-60-50-40-30-20
fIN = 0.9GHz
TA = +85°C
TA = +25°C
TA = -40°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc06
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50-60
fIN = 0.9GHz
NORMALIZED TO DATA AT +25°C
TA = +85°C
TA = +25°C
TA = -40°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc07
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50-60
VCC = 3.0V
VCC = 3.3V
VCC = 3.6V
VCC = 2.7V
fIN = 0.9GHz, TA = +85°C
NORMALIZED TO DATA AT +25°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc08
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50-60
VCC = 3.3V
VCC = 3.6V
VCC = 2.7V
VCC = 3.0V
fIN = 0.9GHz, TA = -40°C
NORMALIZED TO DATA AT +25°C
OUTPUT VOLTAGE
vs. INPUT POWER

MAX2015 toc09
INPUT POWER (dBm)
OUTPUT VOLTAGE (V)-10-60-50-40-30-20
fIN = 1.9GHz
TA = +85°C
TA = +25°C
TA = -40°C
Typical Operating Characteristics

(MAX2015 typical application circuit (Figure 1), VS= VCC= 3.3V, PIN= -10dBm, fIN= 100MHz, R1 = 0Ω, R4 = 0Ω, RL= 10kΩ, VPWDN=
0V, TA= +25°C, unless otherwise noted.)
MAX2015
0.1GHz to 3GHz, 75dB Logarithmic
Detector/Controllerypical Operating Characteristics (continued)

(MAX2015 typical application circuit (Figure 1), VS= VCC= 3.3V, PIN= -10dBm, fIN= 100MHz, R1 = 0Ω, R4 = 0Ω, RL= 10kΩ, VPWDN=
0V, TA= +25°C, unless otherwise noted.)
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc10
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50
fIN = 1.9GHz
NORMALIZED TO DATA AT +25°C
TA = +85°C
TA = +25°C
TA = -40°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc11
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50
fIN = 1.9GHz, TA = +85°C
NORMALIZED TO DATA AT +25°C
VCC = 3.6VVCC = 3.3V
VCC = 2.7VVCC = 3.0V
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc12
INPUT POWER (dBm)
ERROR (dB)-10-20-30-40-50
fIN = 1.9GHz, TA = -40°C
NORMALIZED TO DATA AT +25°C
VCC = 2.7V
VCC = 3.0V
VCC = 3.3VVCC = 3.6V
OUTPUT VOLTAGE
vs. INPUT POWER

MAX2015 toc13
INPUT POWER (dBm)
OUTPUT VOLTAGE (V)
fIN = 2.5GHz
TA = +85°C
TA = -40°C
TA = +25°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc14
INPUT POWER (dBm)
ERROR (dB)
fIN = 2.5GHz
NORMALIZED TO DATA AT +25°C
TA = +85°C
TA = +25°C
TA = -40°C
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc15
INPUT POWER (dBm)
ERROR (dB)
fIN = 2.5GHz, TA = +85°C
NORMALIZED TO DATA AT +25°C
VCC = 3.6V
VCC = 3.3V
VCC = 2.7V
VCC = 3.0V
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER

MAX2015 toc16
INPUT POWER (dBm)
ERROR (dB)
fIN = 2.5GHz, TA = -40°C
NORMALIZED TO DATA AT +25°C
VCC = 2.7V
VCC = 3.0V
VCC = 3.3VVCC = 3.6V
OUTPUT-VOLTAGE ERROR
vs. INPUT POWER
MAX2015 toc18
INPUT POWER (dBm)
ERROR (dB)
TA = -40°C
TA = +25°C
TA = +85°C
fIN = 2.68GHz
NORMALIZED TO DATA AT +25°C
OUTPUT VOLTAGE vs. INPUT POWER
MAX2015 toc17
INPUT POWER (dBm)
OUTPUT VOLTAGE (V)
TA = -40°C
TA = +25°C
TA = +85°C
TA = -40°C
TA = +25°C
TA = +85°C
fIN = 2.68GHz
MAX2015
0.1GHz to 3GHz, 75dB Logarithmic
Detector/Controller
RF PULSE RESPONSE

MAX2015 toc19
TIME (50ns/div)
RF INPUT VOLTAGE, OUTPUT VOLTAGE (V)-0.5
fIN = 100MHzVOUT
RFIN
(AC-COUPLED)
S11 MAGNITUDE

MAX2015 toc20
FREQUENCY (GHz)
MAGNITUDE (dB)
VCC = 2.7V, 3.0V
VCC = 3.3V, 3.6V
S11 MAGNITUDE

MAX2015 toc21
FREQUENCY (GHz)
MAGNITUDE (dB)
TA = -40°C
TA = +25°C
TA = +85°Cypical Operating Characteristics (continued)
(MAX2015 typical application circuit (Figure 1), VS= VCC= 3.3V, PIN= -10dBm, fIN= 100MHz, R1 = 0Ω, R4 = 0Ω, RL= 10kΩ, VPWDN=
0V, TA= +25°C, unless otherwise noted.)
Pin Description
PINNAMEFUNCTION

1, 4VCCSupply Voltage. Bypass with capacitors as specified in the application drawing. Place capacitors as
close to the pin as possible (see the Power-Supply Connections section).
2, 3INHI, INLODifferential RF InputsPWDNPower-Down Input. Drive PWDN with a logic-high to power down the IC. PWDN must be connected to
GND for VS between 4.75V and 5.25V with R4 = 75Ω.GNDGround. Connect to the PCB ground plane.SETSet-Point Input. To operate in detector mode, connect SET to OUT. To operate in controller mode,
connect a precision voltage source to control the power level of a power amplifier.OUTDetector Output. In detector mode, this output provides a voltage proportional to the log of the input
power. In controller mode, this output is connected to a power-control input on a power amplifier (PA).
—EPExposed Paddle (TDFN package only). Connect EP to GND using multiple vias, or the EP can also be left
unconnected.
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED