IC Phoenix
 
Home ›  LL32 > LM2931ADT33-LM2931ADT50-LM2931BD50-LM2931BDT33-LM2931BDT50-LM2931D,VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION
LM2931ADT33-LM2931ADT50-LM2931BD50-LM2931BDT33-LM2931BDT50 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
LM2931ADT33STN/a5200avaiVERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION
LM2931ADT50STN/a5200avaiVERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION
LM2931BD50STN/a28730avaiVERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION
LM2931BDT33STN/a5200avaiVERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION
LM2931BDT50STN/a5200avaiVERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION
LM2931DSTN/a421avaiVERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION


LM2931BD50 ,VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTIONapplications installations or 2 battery jumps. During theand in battery powered systems. In the 8 p ..
LM2931BDT33 ,VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTIONABSOLUTE MAXIMUM RATINGSSymbol Parameter Value UnitV DC Positive Input Voltage 40 VINVIN DC Reverse ..
LM2931BDT50 ,VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTIONLM2931SERIES®VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION■VERY LOW DROPOUT VOLTAGE (0.15VT ..
LM2931CD2T ,LOW DROPOUT VOLTAGE REGULATORSMaximum ratings applied to the device are individual stress limitvalues (not normal operating condi ..
LM2931CDR2 ,100mA, 5V, Low Dropout Voltage Regulator with 60V Load Dump Protectionregulation with an extremely low input−to−output voltage differential.These devices are capable of ..
LM2931CM ,Series Low Dropout RegulatorsThese devices have limited built-in ESD protection. The leads should be shorted together or the dev ..
LM7905CT ,3-Terminal 1A Negative Voltage RegulatorApplicationsTO-220 Package Fixed RegulatorDS007340-3DS007340-14 *Required if regulator is separated ..
LM7905CT ,3-Terminal 1A Negative Voltage RegulatorElectrical Characteristics (Continued)Conditions unless otherwise noted: I = 500mA, C = 2.2μF, C = ..
LM7905CT ,3-Terminal 1A Negative Voltage RegulatorElectrical Characteristics (MC7905/LM7905)(V = -10V, I = 500mA, 0°C ≤T ≤ +125°C, C =2.2µ F, C =1µ F ..
LM7905CT ,3-Terminal 1A Negative Voltage RegulatorFeaturesoutput current.n Thermal, short circuit and safe area protectionThese regulators employ int ..
LM7905CT+ ,3-Terminal 1A Negative Voltage RegulatorLM79XX Series 3-Terminal Negative RegulatorsSeptember 2001LM79XX Series3-Terminal Negative Regulato ..
LM7908 ,3-terminal 1A negative voltage regulator. Output current up to 1A. Output voltage -8V(typ).


LM2931ADT33-LM2931ADT50-LM2931BD50-LM2931BDT33-LM2931BDT50-LM2931D
VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT FUNCTION
LM2931
SERIES

VERY LOW DROP VOLTAGE
REGULATOR WITH INHIBIT FUNCTION
November 2000
BLOCK DIAGRAM
VERY LOW DROPOUT VOLTAGE (0.15V
TYP. AT 10mA LOAD) LOW QUIESCENT CURRENT (TYP 2.5mA,
AT 100mA LOAD) OUTPUT CURRENT UP TO 100mA ADJUSTABLE (FROM VOUT=2.5V ONLY
SO-8) AND FIXED (3.3V & 5V) OUTPUT
VOLTAGE VERSION INTERNAL CURRENT AND THERMAL LIMIT LOAD DUMP PROTECTION UP TO 60V REVERSE TRANSIENT PROTECTION UP TO
-50V TEMPERATURE RANGE: -40 TO 125 oC PACKAGE AVAILABLE: TO-92, DPAK,
TO-220, SO-8 (WITH INHIBIT CONTROL)
DESCRIPTION

The LM2931 series are very low drop
regulators. The very low drop voltage and the
low quiescent current make them particular
suitable for low noise, low power applications
and in battery powered systems. In the 8 pin
configation (SO-8), fully compatible to the older
L78L00 family, a shut down Logic Control
function is available.
This means that when the device is used as a
local regulator is possible to put a part of the
board in stand-by decreasing the total power
consumption. Ideal for automotive application
the LM2931 is proteceted from reverse battery
installations or 2 battery jumps. During the
transient, suchs as a a load dump (60V) when
the input voltage can exceed the specified
maximum operating input voltage (26V), the
regulator will automatically shut down to protect
both internal circuit and the load.
1/16
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are those value beyond which damage to the device may occur. Functional operation under these condition is
not implied.
CONNECTION DIAGRAM AND ORDERING NUMBERS (top view)

(*) Available in Tape & Reel with the suffix "R" for fixed version and "-R" for adjustable version.
LM2931 SERIES

2/16
APPLICATION CIRCUIT FOR FIXED OUTPUT (Figure 1)
APPLICATION CIRCUIT FOR ADJUSTABLE OUTPUT (Figure 2)

R1 suggested Value = 27KΩ
VO = VREF x R1 + R2
LM2931 SERIES

3/16
ELECTRICAL CHARACTERISTICS FOR LM2931A 3.3V (refer to the test circuits,
Tj = 25 o C, VIN = 14 V, CIN = 0.1 μF, CO = 100 μF, IO = 10mA, VINH = 0V unless otherwise specified)
Note 1: Reference Voltage is measured from VOUT to AJD pin.
Note 2: Vd measured when the output voltage has dropped 100mV from the nominal value obtained at 14V.
LM2931 SERIES

4/16
ELECTRICAL CHARACTERISTICS FOR LM2931B 3.3V (refer to the test circuits,
Tj = 25 o C, VIN = 14 V, CIN = 0.1 μF, CO = 100 μF, IO = 10mA, VINH = 0V unless otherwise specified)
Note 1: Reference Voltage is measured from VOUT to AJD pin.
Note 2: Vd measured when the output voltage has dropped 100mV from the nominal value obtained at 14V.
LM2931 SERIES

5/16
ELECTRICAL CHARACTERISTICS FOR LM2931A 5V (refer to the test circuits,
Tj = 25 o C, VIN = 14 V, CIN = 0.1 μF, CO = 100 μF, IO = 10mA, VINH = 0V unless otherwise specified)
Note 1: Reference Voltage is measured from VOUT to AJD pin.
Note 2: Vd measured when the output voltage has dropped 100mV from the nominal value obtained at 14V.
LM2931 SERIES

6/16
ELECTRICAL CHARACTERISTICS FOR LM2931B 5V (refer to the test circuits,
Tj = 25 o C, VIN = 14 V, CIN = 0.1 μF, CO = 100 μF, IO = 10mA, VINH = 0V unless otherwise specified)
Note 1: Reference Voltage is measured from VOUT to AJD pin.
Note 2: Vd measured when the output voltage has dropped 100mV from the nominal value obtained at 14V.
LM2931 SERIES

7/16
ELECTRICAL CHARACTERISTICS FOR LM2931ADJ (refer to the test circuits figure 2 with R1 =27KΩ
and R2 =40.5KΩ, Tj = 25 o C, VIN = 14 V, CIN = 0.1 μF, CO = 100 μF, IO = 10mA, VINH = 0V unless
otherwise specified)
Note 1: Reference Voltage is measured from VOUT to AJD pin.
Note 2: Vd measured when the output voltage has dropped 100mV from the nominal value obtained at 14V.
LM2931 SERIES

8/16
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED