IC Phoenix
 
Home ›  FF25 > FXL4T245-FXL4T245BQX,Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs
FXL4T245-FXL4T245BQX Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
FXL4T245FSCN/a2878avaiLow Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs
FXL4T245BQXFSCN/a2323avaiLow Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs


FXL4T245 ,Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE OutputsFeaturesThe FXL4T245 is a configurable dual-voltage-supply trans-

FXL4T245-FXL4T245BQX
Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs
FXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs April 2004 Revised June 2004 FXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs General Description Features The FXL4T245 is a configurable dual-voltage-supply trans-Bi-directional interface between any 2 levels from 1.1V lator designed for bi-directional voltage translation of sig- to 3.6V nals between two voltage levels. The device allowsFully configurable, inputs track V level CC translation between voltages as high as 3.6V to as low as Non-preferential power-up sequencing; either V may CC 1.1V. The A Port tracks the V level, and the B Port CCA be powered-up first tracks the V level. Both ports are designed to accept CCB No power-up sequencing required supply voltage levels from 1.1V to 3.6V. This allows for bi- Outputs remain in 3-STATE until active V level is directional voltage translation over a variety of voltage lev- CC els: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. reached The device remains in 3-STATE until both V s reachOutputs switch to 3-STATE if either V is at GND CC CC active levels allowing either V to be powered-up first. CCPower-off protection The device also contains power down control circuits that Control inputs (T/R, OE) levels are referenced to V CCA place the device in 3-STATE if either V is removed. CC voltage The Transmit/Receive (T/R) input determines the direction Packaged in 14-terminal DQFN (2.5mm x 3.0mm) of data flow through the device. The OE input, when HIGH, package disables both the A and B Ports by placing them in ESD protection exceeds: 3-STATE condition. The FXL4T245 is designed so that the • 4kV HBM ESD control pins (T/R and OE) are supplied by V . CCA (per JESD22-A114 & Mil Std 883e 3015.7)  8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7)  1kV CDM ESD (per ESD STM 5.3)  200V MM ESD (per JESD22-A115 & ESD STM5.2) Ordering Code: Package Order Number Package Description Number FXL4T245BQX MLP014A 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm © 2004 DS500891
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED