IC Phoenix
 
Home ›  DD26 > DS1744-70+-DS1744-70IND+-DS1744P-70+-DS1744W-120+-DS1744W-120IND+-DS1744WP-120+,Y2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744-70+-DS1744-70IND+-DS1744P-70+-DS1744W-120+-DS1744W-120IND+ Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
DS1744-70+ |DS174470MAXIMN/a53avaiY2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744-70+ |DS174470DALLASN/a6990avaiY2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744-70IND+ |DS174470INDDALLASN/a6990avaiY2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744P-70+ |DS1744P70DALLASN/a65avaiY2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744P-70+ |DS1744P70MAXIMN/a2avaiY2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744W-120+ |DS1744W120DALLASN/a700avaiY2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744W-120IND+ |DS1744W120INDDALLASN/a5avaiY2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744WP-120+ |DS1744WP120DALLASN/a7avaiY2K-Compliant, Nonvolatile Timekeeping RAMs


DS1744-70+ ,Y2K-Compliant, Nonvolatile Timekeeping RAMsPIN DESCRIPTION A0–A14 - Address Input CE - Chip Enable OE - Output Enable WE - Write Enable V ..
DS1744-70IND ,Y2K-Compliant, Nonvolatile Timekeeping RAMsFEATURES PIN CONFIGURATIONS Integrated NV SRAM, Real-Time Clock, TOP VIEW Crystal, Power-Fail C ..
DS1744-70IND+ ,Y2K-Compliant, Nonvolatile Timekeeping RAMs DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744P-70 ,Y2K-Compliant, Nonvolatile Timekeeping RAMsPIN DESCRIPTION A0–A14 - Address Input CE - Chip Enable OE - Output Enable WE - Write Enable V ..
DS1744P-70+ ,Y2K-Compliant, Nonvolatile Timekeeping RAMs DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744P-70+ ,Y2K-Compliant, Nonvolatile Timekeeping RAMsPIN DESCRIPTION A0–A14 - Address Input CE - Chip Enable OE - Output Enable WE - Write Enable V ..
DV74AC244 , Octal buffer/Line Driver with 3-state Outputs
DVIULC6-2P6 ,Ultra Low capacitance 2 lines ESD protectionApplicationsBenefits■ DVI ports up to 1.65 Gb/s■ ESD standards compliance guaranteed at ■ IEEE 1394 ..
DVIULC6-4SC6 ,Ultralow capacitance ESD protectionFeatures■ 4-line ESD protection (IEC 61000-4-2)■ Protects V when applicableBUS■ Ultralow capacitanc ..
DW01 , One Cell Lithium-ion/Polymer Battery Protection IC
DW01 , One Cell Lithium-ion/Polymer Battery Protection IC
DW01 , One Cell Lithium-ion/Polymer Battery Protection IC


DS1744-70+-DS1744-70IND+-DS1744P-70+-DS1744W-120+-DS1744W-120IND+-DS1744WP-120+
Y2K-Compliant, Nonvolatile Timekeeping RAMs
FEATURES
��Integrated NV SRAM, Real-Time Clock, Crystal, Power-Fail Control Circuit, and
Lithium Energy Source
��Clock Registers are Accessed Identically to
the Static RAM. These Registers are Resident
in the Eight Top RAM Locations.
��Century Byte Register (i.e., Y2K Compliant)
��Totally Nonvolatile with Over 10 Years of
Operation in the Absence of Power
��BCD-Coded Century, Year, Month, Date,
Day, Hours, Minutes, and Seconds with Automatic Leap-Year Compensation Valid
Up to the Year 2100
��Battery Voltage-Level Indicator Flag
��Power-Fail Write Protection Allows for ±10%
VCC Power-Supply Tolerance
��Lithium Energy Source is Electrically
Disconnected to Retain Freshness Until
Power is Applied for the First Time
��DIP Module Only
Standard JEDEC Byte-Wide 32k x 8 Static RAM Pinout
��PowerCap� Module Board Only
Surface-Mountable Package for Direct
Connection to PowerCap Containing
Battery and Crystal Replaceable Battery (PowerCap)
Power-On Reset Output
Pin-for-Pin Compatible with Other Densities
of DS174xP Timekeeping RAM
��Also Available in Industrial Temperature Range: -40°C to +85°C
PIN CONFIGURATIONS

PowerCap is a registered trademark of Dallas Semiconductor.
DS1744/DS1744P
Y2K-Compliant, Nonvolatile Timekeeping RAMs
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
PIN DESCRIPTION

A0–A14 - Address Input
CE - Chip Enable
OE - Output Enable
WE - Write Enable
VCC - Power-Supply Input
GND - Ground
DQ0–DQ7 - Data Input/Output
N.C. - No Connection
RST - Power-On Reset Output (PowerCap module board only)
X1, X2 - Crystal Connection
VBAT - Battery Connection
ORDERING INFORMATION

*DS9034PCX (PowerCap) required. (Must be ordered separately.) DESCRIPTION
The DS1744 is a full-function, year-2000-compliant (Y2KC), real-time clock/calendar (RTC) and 32k x 8
NV SRAM. User access to all registers within the DS1744 is accomplished with a byte-wide interface as
shown in Figure 1. The RTC information and control bits reside in the eight uppermost RAM locations. The RTC registers contain century, year, month, date, day, hours, minutes, and seconds data in 24-hour
BCD format. Corrections for the date of each month and leap year are made automatically. The RTC clock
registers are double-buffered to avoid access of incorrect data that can occur during clock update cycles.
The double-buffered system also prevents time loss as the timekeeping countdown continues unabated by
access to time register data. The DS1744 also contains its own power-fail circuitry that deselects the device when the VCC supply is in an out-of-tolerance condition. This feature prevents loss of data from
unpredictable system operation brought on by low VCC as errant access and update cycles are avoided.
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
Figure 1. Block Diagram

PACKAGES

The DS1744 is available in two packages (28-pin DIP and 34-pin PowerCap module). The 28-pin DIP style module integrates the crystal, lithium energy source, and silicon all in one package. The 34-pin
PowerCap module board is designed with contacts for connection to a separate PowerCap (DS9034PCX)
that contains the crystal and battery. This design allows the PowerCap to be mounted on top of the
DS1744P after the completion of the surface-mount process. Mounting the PowerCap after the surface-
mount process prevents damage to the crystal and battery due to the high temperatures required for solder reflow. The PowerCap is keyed to prevent reverse insertion. The PowerCap module board and PowerCap
are ordered separately and shipped in separate containers. The part number for the PowerCap is
DS9034PCX.
CLOCK OPERATIONS—READING THE CLOCK

While the double-buffered register structure reduces the chance of reading incorrect data, internal updates to the DS1744 clock registers should be halted before clock data is read to prevent reading of data in
transition. However, halting the internal clock register updating process does not affect clock accuracy.
Updating is halted when a 1 is written into the read bit, bit 6 of the century register (Table 2). As long as a
1 remains in that position, updating is halted. After a halt is issued, the registers reflect the count, that is,
day, date, and time that was current at the moment the halt command was issued. However, the internal clock registers of the double-buffered system continue to update so that the clock accuracy is not affected
by the access of data. All the DS1744 registers are updated simultaneously after the internal clock-register
updating process has been re-enabled. Updating is within a second after the read bit is written to 0. The
READ bit must be a 0 for a minimal of 500�s to ensure the external registers are updated.
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
Table 1. Truth Table

SETTING THE CLOCK

As shown in Table 2, bit 7 of the century register is the write bit. Setting the write bit to a 1, like the read
bit, halts updates to the DS1744 registers. The user can then load them with the correct day, date, and time
data in 24-hour BCD format. Resetting the write bit to a 0 then transfers those values to the actual clock counters and allows normal operation to resume.
STOPPING AND STARTING THE CLOCK OSCILLATOR

The clock oscillator can be stopped at any time. To increase the shelf life, the oscillator can be turned off
to minimize current drain from the battery. The OSC bit is the MSB (bit 7) of the seconds registers (Table
2). Setting it to a 1 stops the oscillator.
FREQUENCY TEST BIT

As shown in Table 2, bit 6 of the day byte is the frequency test bit. When the frequency test bit is set to logic 1 and the oscillator is running, the LSB of the seconds register toggles at 512Hz. When the seconds
register is being read, the DQ0 line toggles at the 512Hz frequency as long as conditions for access remain
valid (i.e., CE low, OE low, WE high, and address for seconds register remain valid and stable).
CLOCK ACCURACY (DIP MODULE)

The DS1744 is guaranteed to keep time accuracy to within �1 minute per month at +25�C. The RTC is
calibrated at the factory by Dallas Semiconductor using nonvolatile tuning elements, and does not require additional calibration. For this reason, methods of field clock calibration are not available and not
necessary. Clock accuracy is also affected by the electrical environment; caution should be taken to place
the RTC in the lowest-level EMI section of the PC board layout. For additional information, refer to
Application Note 58: Crystal Considerations with Dallas Real-Time Clocks. CLOCK ACCURACY (PowerCap MODULE)
The DS1744 and DS9034PCX are individually tested for accuracy. Once mounted together, the module
typically keeps time accuracy to within �1.53 minutes per month (35ppm) at +25°C. Clock accuracy is
also affected by the electrical environment and caution should be taken to place the RTC in the lowest-
level EMI section of the PC board layout. For additional information, refer to Application Note 58: Crystal Considerations with Dallas Real-Time Clocks.
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
Table 2. Register Map

OSC = Stop Bit R = Read Bit FT = Frequency Test
W = Write Bit X = See Note BF = Battery Flag
NOTE: All indicated “X” bits are not dedicated to any particular function and can be used as normal RAM bits.

RETRIEVING DATA FROM RAM OR CLOCK

The DS1744 is in the read mode whenever OE (output enable) is low, WE (write enable) is high, and (chip enable) is low. The device architecture allows ripple-through access to any of the address
locations in the NV SRAM. Valid data is available at the DQ pins within tAA after the last address input is
stable, providing that the CE and OE access times and states are satisfied. If CE or OE access times and
states are not met, valid data is available at the latter of chip-enable access (tCEA) or at output-enable access
time (tOEA). The state of the DQ pins is controlled by CE and OE. If the outputs are activated before tAA,
the data lines are driven to an intermediate state until tAA. If the address inputs are changed while CE and remain valid, output data remains valid for output-data hold time (tOH) but then goes indeterminate
until the next address access.
WRITING DATA TO RAM OR CLOCK

The DS1744 is in the write mode whenever WE and CEare in their active state. The start of a write is
referenced to the latter occurring transition of WE or CE. The addresses must be held valid throughout
the cycle. CE or WE must return inactive for a minimum of tWR prior to the initiation of another read or
write cycle. Data in must be valid tDS prior to the end of write and remain valid for tDH afterward. In a
typical application, the OE signal is high during a write cycle. However, OE can be active provided that
care is taken with the data bus to avoid bus contention. If OE is low prior to WE transitioning low, the
data bus can become active with read data defined by the address inputs. A low transition on WE then
disables the output tWEZ after WE goes active.
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
DATA-RETENTION MODE

The 5V device is fully accessible and data can be written or read only when VCC is greater than VPF.
However, when VCC is below the power-fail point, VPF (point at which write protection occurs), the internal clock registers and SRAM are blocked from any access. At this time the power-fail reset-output
signal (RST) is driven active and remains active until VCC returns to nominal levels. When VCC falls
below the battery switch point VSO (battery supply level), device power is switched from the VCC pin to the
backup battery. RTC operation and SRAM data are maintained from the battery until VCC is returned to
nominal levels. The 3.3V device is fully accessible, and data can be written or read only when VCC is
greater than VPF. When VCC falls below VPF access to the device is inhibited. At this time the power-fail
reset-output signal (RST) is driven active and remains active until VCC returns to nominal levels. If VPF is
less than VSO, the device power is switched from VCC to the backup supply (VBAT) when VCC drops below VPF. If VPF is greater than VSO, the device power is switched from VCC to the backup supply (VBAT) when
VCC drops below VSO. RTC operation and SRAM data are maintained from the battery until VCC is
returned to nominal levels. The RST signal is an open-drain output and requires a pullup. Except for the
RST, all control, data, and address signals must be powered down when VCC is powered down.
BATTERY LONGEVITY

The DS1744 has a lithium power source that is designed to provide energy for clock activity and clock and
RAM data retention when the VCC supply is not present. The capability of this internal power supply is sufficient to power the DS1744 continuously for the life of the equipment in which it is installed. For
specification purposes, the life expectancy is 10 years at +25�C with the internal clock oscillator running
in the absence of VCC power. Each DS1744 is shipped from Dallas Semiconductor with its lithium energy
source disconnected, guaranteeing full energy capacity. When VCC is first applied at a level greater than VPF, the lithium energy source is enabled for battery-backup operation. Actual life expectancy of the
DS1744 is much longer than 10 years since no lithium battery energy is consumed when VCC is present.
BATTERY MONITOR

The DS1744 constantly monitors the battery voltage of the internal battery. The battery flag bit (bit 7) of
the day register is used to indicate the voltage-level range of the battery. This bit is not writable and should
always be a 1 when read. If a 0 is ever present, an exhausted lithium energy source is indicated, and both the contents of the RTC and RAM are questionable.
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
ABSOLUTE MAXIMUM RATINGS

Voltage Range on Any Pin Relative to Ground……………………..………………………………………..-0.3V to +6.0V
Operating Temperature Range……………………………………...………………………………………...-40°C to +85°C Storage Temperature Range…………………………………………………………………………………..-40°C to +85°C
Soldering Temperature…………………………………………….See IPC/JEDEC J-STD-020A (DIP Package) (Note 7)
This is a stress rating only and functional operation of the device at these or any other condition beyond those indicated in the
operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time can affect reliability.
OPERATING RANGE

RECOMMENDED DC OPERATING CONDITIONS

(TA = Over the operating range)
DC ELECTRICAL CHARACTERISTICS

(VCC = 5.0V �10%, TA = Over the operating range.)
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
DC ELECTRICAL CHARACTERISTICS

(VCC = 3.3V �10%, TA = Over the operating range.) AC CHARACTERISTICS—READ CYCLE (5V)
(VCC = 5.0V �10%, TA = Over the operating range.)
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
AC CHARACTERISTICS—READ CYCLE (3.3V)

(VCC = 3.3V �10%, TA = Over the operating range.)
READ CYCLE TIMING DIAGRAM

ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED