IC Phoenix
 
Home ›  DD21 > DS1135LU-30-DS1135LU-30+-DS1135LZ-15,3-Volt 3-in-1 High-Speed Silicon Delay Line
DS1135LU-30-DS1135LU-30+-DS1135LZ-15 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
DS1135LU-30 |DS1135LU30DallasN/a50avai3-Volt 3-in-1 High-Speed Silicon Delay Line
DS1135LU-30+ |DS1135LU30+MAXIMN/a790avai3-Volt 3-in-1 High-Speed Silicon Delay Line
DS1135LZ-15 |DS1135LZ15MAXIMN/a1avai3-Volt 3-in-1 High-Speed Silicon Delay Line


DS1135LU-30+ ,3-Volt 3-in-1 High-Speed Silicon Delay LineFEATURES PIN ASSIGNMENT  All-Silicon Timing Circuit  Three Independent Buffered Delays  Sta ..
DS1135LZ-15 ,3-Volt 3-in-1 High-Speed Silicon Delay LinePIN DESCRIPTION IN1-IN3 - Input Signals OUT1-OUT3 - Output Signals V - +3V Supply CCGND ..
DS1181LE+T ,20MHz to 134MHz Spread-Spectrum Clock Modulator for LCD PanelsFeaturesThe DS1181L is a spread-spectrum clock modulator IC ● Modulates a 20MHz to 134MHz Clock wit ..
DS1200 ,Serial RAM ChipPIN DESCRIPTION System Access Control V - +5V CCSecure Personnel Areas Calibration RST - Re ..
DS1200S ,Serial RAM ChipPIN DESCRIPTION System Access Control V - +5V CCSecure Personnel Areas Calibration RST - Re ..
DS1200S ,Serial RAM Chipblock diagram (Figure 1) illustrates the main elements of the device: shift register, control logic ..
DTA114EM , Built-In Bias Resistors Enable The Configuration of An Inverter Circuit Without Connecting External Input Resistors
DTA114ESATP , Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors
DTA114EUA T106 , DTA114E series
DTA114EUA T106 , DTA114E series
DTA114EUAT106 , DTA114E series
DTA114EUA-T106 , DTA114E series


DS1135LU-30-DS1135LU-30+-DS1135LZ-15
3-Volt 3-in-1 High-Speed Silicon Delay Line
FEATURES All-Silicon Timing Circuit Three Independent Buffered Delays Stable and Precise Over Temperature and
Voltage
Leading and Trailing Edge Precision
Preserves the Input Symmetry
Vapor Phase and IR Reflow Solderable Available in Tape and Reel Delays Specified Over Both Commercial
and Industrial Temperature Ranges
3V Operation Recommended Replacement for DS1033
PIN ASSIGNMENT

PIN DESCRIPTION

IN1-IN3 - Input Signals
OUT1-OUT3 - Output Signals
VCC - +3V Supply
GND - Ground
DESCRIPTION

The DS1135L series is a low-power, 3V high-speed version of the popular DS1013, DS1033, and
DS1035 series.
The DS1135L series of delay lines have three independent logic buffered delays in a single package. The
device is our fastest 3-in-1 delay line. It is available in a 150-mil 8-pin SO.
The device features precise leading and trailing edge accuracy. It has the inherent reliability of an all-
silicon delay line solution.
Standard delay values are indicated in Table 1.
DS1135L
3V 3-in-1 High-Speed Silicon
Delay Line

DS1135LZ 8-Pin SO (150 mils)
IN2
GND
IN3
IN1 VCC
OUT1
OUT2
OUT3
DS1135L
LOGIC DIAGRAM Figure 1

PART NUMBER DELAY TABLE (tPLH, tPHL) Table 1
PART NUMBER
DELAY PER
OUTPUT
(ns)
INITIAL
TOLERANCE
(Note 1)
TOLERANCE OVER
TEMP AND VOLTAGE
(Note 2)
0°C to +70°C -40°C to +85°C

DS1135LZ-10+ 10/10/10 ±1.0ns ±2.0ns ±3.0ns
DS1135LZ-12+ 12/12/12 ±1.0ns ±2.0ns ±3.0ns
DS1135LZ-15+ 15/15/15 ±1.0ns ±2.5ns ±4.0ns
DS1135LZ-20+ 20/20/20 ±1.0ns ±2.5ns ±4.0ns
DS1135LZ-25+ 25/25/25 ±1.5ns ±3.0ns ±5.0ns
DS1135LZ-30+ 30/30/30 ±1.5ns ±3.0ns ±5.0ns
+Denotes a lead(Pb)-free/RoHS-compliant package.
NOTES:

1. Nominal conditions are +25°C and VCC = +3.3V.
2. Voltage range of 2.7V to 3.6V.
3. Delay accuracies are for both leading and trailing edges.
TEST SETUP DESCRIPTION

Figure 2 illustrates the hardware configuration used for measuring the timing parameters of the DS1135L.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20 ps resolution) connected to the output. The DS1135L output taps
are selected and connected to the interval counter by a VHF switch control unit. All measurements are
fully automated with each instrument controlled by the computer over an IEEE 488 bus.
TIME DELAY OUT IN
ONE OF THREE
DS1135L
DS1135L TEST CIRCUIT Figure 2

PULSE
GENERATOR
UNIT UNDER
TEST
TAPS 1-3
START
50Ω
STOP
50Ω
OUT
IN
VHF
SWITCH
CONTROL
UNIT
TIME INTERVAL
COUNTER
DS1135L
ABSOLUTE MAXIMUM RATINGS

Voltage Range on Any Pin Relative to Ground -1.0V to +6.0 V
Short-Circuit Output Current 50mA for 1 second
Operating Temperature Range -40°C to +85°C
Storage Temperature Range -55°C to +125°C
Lead Temperature (soldering, 10 seconds) +300°C
Soldering Temperature (reflow) +260°C
This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the
operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of
time may affect reliability.
DC ELECTRICAL CHARACTERISTICS

(VCC = 2.7V to 3.6V, TA = -40°C to +85°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

Supply Voltage VCC 2.7 3.3 3.6 V
Active Current ICC VCC = 3.6V,
period = 1µs 10 mA
High Level Input Voltage VIH 2.0 VCC + 0.5 V
Low Level Input Voltage VIL -0.5 0.8 V
Input Leakage IL 0V ≤ VI ≤ VCC -1.0 +1.0 µA
High Level Output
Current ICC VCC = 2.7V,
VOH = 2V -1.0 mA
Low Level Output
Current ICC VCC = 2.7V,
VOL = 0.4V 8 mA
AC ELECTRICAL CHARACTERISTICS

(VCC = 2.7V to 3.6V, TA = -40°C to +85°C, unless otherwise noted.)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES

Period tPERIOD 2 (tWI ) ns
Input Pulse Width tWI 100% of
Delay Value ns
Input-to-Output Delay tPLH, tPHL See Table 1 ns
Output Rise or Fall Time tOF, tOR 2.0 2.5 ns
Power-up Time tPU 1 ms 2
CAPACITANCE
(TA = +25°C, unless otherwise noted.)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES

Input Capacitance CIN 10 pF
DS1135L
TEST CONDITIONS

Ambient Temperature: 25°C ± 3°C
Supply Voltage (VCC ): 3.3V ± 0.1V
Input Pulse:
High: 3.0V ± 0.1V
Low: 0.0V ± 0.1V
Source Impedance: 50Ω Max.
Rise and Fall Time: 3.0ns Max. — Measured between 0.6V and 2.4V.
Pulse Width: 500ns
Pulse Period: 1µs
Output Load Capacitance: 15pF
Output: Each output is loaded with the equivalent of one 74F04 input gate. Data is measured at the 1.5V level on the rising and falling edges.
Note: The above conditions are for test only and do not restrict the devices under other data sheet
conditions.

NOTES:

1. All voltages are referenced to ground.
2. Power-up time is the time from the application of power to the time stable delays are being produced
at the output.
TIMING DIAGRAM

tFALL
80%
tRISE
20%
IN
OUT
1.5V 1.5V
tWI tWI
PERIOD
1.5V 1.5V 1.5V
tPLH tPHL
tOF tOR
DS1135L
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading
edge of the
following pulse.
tWI (Pulse Width): The elapsed time on the pulse between the 1.5V point on the leading edge and the

1.5V point on the trailing edge or the 1.5V point on the trailing edge and the 1.5V point on the leading
edge.
tRISE (Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the

input pulse.
tFALL (Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge on the

input pulse.
tPLH
(Time Delay, Rising): The elapsed time between the 1.5V point on the leading edge of the input
pulse and the 1.5V point on the leading edge of the output pulse.
tPHL
(Time Delay, Falling): The elapsed time between the 1.5V point on the falling edge of the input
pulse and the 1.5V point on the falling edge of the output pulse.
ORDERING INFORMATION

PACKAGE INFORMATION

For the latest package outline information and land patterns (footprints), go to
www.maximintegrated.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status
only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of
RoHS status.
PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO.

8 SO S8+2 21-0041 90-0096
DS1135L
PACKAGE TYPE:
Z = SO (150MIL)
Dash Delay (NS)
Number Time
10 10
12 12
15 15
20 20
25 25
30 30
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED