BQ2023PW ,Single-Wire Advanced Battery Monitor IC for Cellular and PDA ApplicationsNot Recommended for New Designs ..
BQ2024DBZR ,1.5K Bit Serial EPROM with SDQ Interface 3-SOT-23 -20 to 70block diagram on page 1 shows the relationships among the major control and memory sections of theb ..
BQ2024DBZRG4 ,1.5K Bit Serial EPROM with SDQ Interface 3-SOT-23 -20 to 70FEATURES DESCRIPTIONThe bq2024 is a 1.5K-bit serial EPROM containing a2• 1536 Bits of One-Time Prog ..
BQ2031 ,Lead-Acid Switchmode Charge Management IC With User-Selectable Charge AlgorithmsFeaturesthe allowed range or an internalswitch-mode power conversiontimer runs out and places the➤ ..
BQ2031PN , Lead-Acid Fast-Charge IC
BQ2031PN , Lead-Acid Fast-Charge IC
BUF11704 ,18-v Supply Multi-Channel Gamma Correction BufferFEATURES DESCRIPTIONThe BUFxx704 are a series of multi-channel buffers Wide Supply Range: 4.5 V to ..
BUF11704AIPWP ,18-v Supply Multi-Channel Gamma Correction BufferELECTRICAL CHARACTERISTICS: BUFxx704 Over operating free-air temperature range, V = 18 V, T = 25°C ..
BUF11704AIPWPR ,18-v Supply Multi-Channel Gamma Correction Buffermaximum ratings may cause permanent damage to the device. These are stress ratings only, andfunctio ..
BUF12800AIPWP ,Reference Voltage Generator for LCD Gamma CorrectionELECTRICAL CHARACTERISTICS Boldface limits apply over the specified temperature range, T = −40°C ..
BUF12800AIPWPR ,Reference Voltage Generator for LCD Gamma CorrectionMAXIMUM RATINGSInstruments recommends that all integrated circuits beSupply Voltage, V . . . . . . ..
BUF12840AIRGER ,12-CH Gamma Voltage Generator with Dual Memory Banks and EEPROM Access 24-VQFN -40 to 95ELECTRICAL CHARACTERISTICSBoldface limits apply over the specified temperature range, T =–40°C to + ..
BQ2023PW
Single-Wire Advanced Battery Monitor IC for Cellular and PDA Applications
������
����������� �������� ������� ������� ��
��� �������� ��� ��� ������������
SLUS480B – MAY 2001
Multifunction Monitoring IC Designed to
Work With an Intelligent Host Controller:
– Provides Accurate State of Charge
Information for Rechargeable Batteries
– Enhances Power and Charge
Management in the System Supply Operation Down to 2.4 V; Ideal for
Single-Cell Li-Ion or Li-Pol Applications Communicates Over Single-Wire SDQ
Serial Interface Resolves Signals Down to 3.05 μVh High-Accuracy Coulometric Charge and
Discharge Current Integration Differential Current Sense Input Automatic and Continuous Offset
Calibration and Compensation 32 Bytes of General-Purpose RAM, 224
Bytes of FLASH, and 8 Bytes of Secure ID
ROM Internal Temperature Sensor With 0.25°K
Resolution Eliminates the Need for an
External Thermistor Programmable Digital Output Port Battery-Pack Removal Detection Input
Places the IC in the Sleep Mode When
System Is Not Present High-Accuracy Internal Timebase
Eliminates External Crystal Oscillator Low Power Consumption:
– Operating: 40 μA
– Sleep: 1.5 μA
descriptionThe bq2023 is an advanced battery monitoring IC
that accurately measures the charge and dis-
charge currents in rechargeable battery packs.
Intended for pack integration, the bq2023
contains all the necessary functions to form the
basis for an accurate battery gas gauge in cellular
phones, PDAs, or other portable products.
Gas gauging is accomplished by coulomb counting (i.e., measuring the charge input to and subsequently
removed from the battery). The bq2023 achieves that by measuring the differential voltage drop across a
low-value series sense resistor between the negative terminal of the battery and the battery-pack negative
contact. An internal voltage-to-frequency converter (VFC) converts this voltage into charge and discharge
counts. The VFC is capable of resolving signals down to 3.05 μV. By using the accumulated counts in the
charge, discharge, and self-discharge registers, an intelligent host controller can determine battery
state-of-charge information. To improve accuracy, the bq2023 continuously measures and compensates offset
errors in the VFC.
The bq2023 works with the host controller in the portable system to implement the battery management system.
The host controller interprets the bq2023 data and communicates meaningful battery data to the end-user or
power-management system. The SDQ single-wire bus architecture allows multiple bq2023s to exist on the
same communications node simultaneously.
The bq2023 provides 224 bytes of flash memory, 8-bytes of secure ID ROM, and 32 bytes of RAM. The
nonvolatile memory maintains formatted battery monitor information, identification codes, warranty information,
or other critical battery parameters while the battery is temporarily shorted or deeply discharged.
AVAILABLE OPTIONSPlease be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
RBICC
VSS
SDQ
STAT
SRP
SRN
PDET
PW PACKAGE
(TOP VIEW)
