IC Phoenix
 
Home ›  7728 > 74VHC00TTR,QUAD 2-INPUT NAND GATE
74VHC00TTR Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74VHC00TTRSTMN/a5000avaiQUAD 2-INPUT NAND GATE
74VHC00TTRSTN/a25000avaiQUAD 2-INPUT NAND GATE
74VHC00TTRST ?N/a2300avaiQUAD 2-INPUT NAND GATE


74VHC00TTR ,QUAD 2-INPUT NAND GATEAbsolute Maximum Ratings are those values beyond which damage to the device may occur. Functional o ..
74VHC00TTR ,QUAD 2-INPUT NAND GATEAbsolute Maximum Ratings are those values beyond which damage to the device may occur. Functional o ..
74VHC02 ,Quad 2-Input NOR GateGeneral Descriptiondue to mismatched supply and input voltages.The VHC02 is an advanced high-speed ..
74VHC02M ,Quad 2-Input NOR GateFeaturesThe VHC02 is an advanced high-speed CMOS 2-Input

74VHC00TTR
QUAD 2-INPUT NAND GATE
1/8June 2001 HIGH SPEED: tPD = 3.7ns (TYP.) at VCC = 5V LOW POWER DISSIPATION:CC = 2 μA (MAX.) at TA =25°C HIGH NOISE IMMUNITY:
VNIH = VNIL = 28% VCC (MIN.) POWER DOWN PROTECTION ON INPUTS SYMMETRICAL OUTPUT IMPEDANCE:OH | = IOL = 8mA (MIN) BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL OPERATING VOLTAGE RANGE:
VCC(OPR) = 2V to 5.5V PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 00 IMPROVED LATCH-UP IMMUNITY LOW NOISE: V OLP = 0.8V (MAX.)
DESCRIPTION

The 74VHC00 is an advanced high-speed CMOS
QUAD 2-INPUT NAND GATE fabricated with
sub-micron silicon gate and double-layer metal
wiring C2 MOS technology.
The internal circuit is composed of 3 stages
including buffer output, which provides high noise
immunity and stable output.
Power down protection is provided on all inputs
and 0 to 7V can be accepted on inputs with no
regard to the supply voltage. This device can be
used to interface 5V to 3V.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
74VHC00

QUAD 2-INPUT NAND GATE
PIN CONNECTION AND IEC LOGIC SYMBOLS
ORDER CODES
74VHC00
2/8
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
TRUTH TABLE
ABSOLUTE MAXIMUM RATINGS

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied
RECOMMENDED OPERATING CONDITIONS

1) VIN from 30% to 70% of VCC
74VHC00
3/8
DC SPECIFICATIONS
AC ELECTRICAL CHARACTERISTICS (Input t
r = tf = 3ns)
(*) Voltage range is 3.3V ± 0.3V
(**) Voltage range is 5.0V ± 0.5V
CAPACITIVE CHARACTERISTICS

1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/4 (per gate)
74VHC00
4/8
DYNAMIC SWITCHING CHARACTERISTICS

1) Worst case package.
2) Max number of outputs defined as (n). Data inputs are driven 0V to 5.0V, (n-1) outputs switching and one output at GND.
3) Max number of data inputs (n) switching. (n-1) switching 0V to 5.0V. Inputs under test switching: 5.0V to threshold (VILD), 0V to threshold
(VIHD), f=1MHz.
TEST CIRCUIT

CL =15/50pF or equivalent (includes jig and probe capacitance)
RT = ZOUT of pulse generator (typically 50Ω)
74VHC00
5/8
WAVEFORM: PROPAGATION DELAYS (f=1MHz; 50% duty cycle)

ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED