IC Phoenix
 
Home ›  7722 > 74LVC1G11GM-74LVC1G11GV-74LVC1G11GW,Single 3-input AND gate
74LVC1G11GM-74LVC1G11GV-74LVC1G11GW Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74LVC1G11GMNXPN/a90480avaiSingle 3-input AND gate
74LVC1G11GVNXPN/a18000avaiSingle 3-input AND gate
74LVC1G11GWNXPN/a39000avaiSingle 3-input AND gate


74LVC1G11GM ,Single 3-input AND gateFeatures and benefits Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant inputs for inte ..
74LVC1G11GV ,Single 3-input AND gateLogic diagram74LVC1G11 All information provided in this document is subject to legal disclaimers. ..
74LVC1G11GW ,Single 3-input AND gateGeneral descriptionThe 74LVC1G11 provides a single 3-input AND gate.The input can be driven from ei ..
74LVC1G11W6-7 , SINGLE 3 INPUT POSITIVE AND GATE
74LVC1G11W6-7 , SINGLE 3 INPUT POSITIVE AND GATE
74LVC1G125DBVRE4 ,Single Bus Buffer Gate With 3-State Outputs 5-SOT-23 -40 to 125Maximum Ratings . 411 Power Supply Recommendations... 127.2 Handling Ratings. 412 Layout.... 127.3 ..
8102302PA ,Dual Low-Power JFET-Input General-Purpose Operational AmplifierElectrical Characteristics for TL06xM and TL064M.. 712.4 Trademarks..... 216.10 Operating Character ..
81487EIB ,【15kV ESD Protected, 1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers
8155H-2 , 2048-BIT STATIC HMOS RAM WITH I/O PORTS AND TIMER
8169 ,DIGITAL AUDIO PROCESSOR WITH MULTICHANNEL DDX⑩applications with commercial audio D/A converters. The output sampling frequency is fixed at 48 kHz ..
8-188275-4 , AMP Micro-Match Miniature Connector System
81C55 ,2048-Bit CMOS STATIC RAM WITH I/O PORTS AND TIMER


74LVC1G11GM-74LVC1G11GV-74LVC1G11GW
Single 3-input AND gate
1. General description
The 74LVC1G11 provides a single 3-input AND gate.
The input can be driven from either 3.3 Vor5 V devices. This feature allows the use of
this device in a mixed 3.3 V and5 V environment.
Schmitt-trigger action at all inputs makes the circuit highly tolerant to slower input rise and
fall time.
This device is fully specified for partial power-down applications using IOFF.
The IOFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
2. Features and benefits
Wide supply voltage range from 1.65 Vto 5.5V5 V tolerant inputs for interfacing with 5 V logic High noise immunity Complies with JEDEC standard: JESD8-7 (1.65 Vto 1.95V) JESD8-5 (2.3 Vto 2.7V) JESD8-B/JESD36 (2.7 Vto 3.6V) 24 mA output drive (VCC =3.0V) ESD protection: HBM JESD22-A114F exceeds 2000V MM JESD22-A115-A exceeds 200V CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Multiple package options Specified from 40 Cto+85 C and 40 Cto+125C
74L VC1G11
Single 3-input AND gate
Rev. 7 — 4 July 2012 Product data sheet
NXP Semiconductors 74LVC1G11
Single 3-input AND gate
3. Ordering information

4. Marking

[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram

Table 1. Ordering information

74LVC1G11GW 40Cto +125C SC-88 plastic surface-mounted package; 6 leads SOT363
74LVC1G11GV 40Cto +125C SC-74 plastic surface-mounted package (TSOP6); 6 leads SOT457
74LVC1G11GM 40Cto +125C XSON6 plastic extremely thin small outline package; leads; 6 terminals; body 1 1.45 0.5 mm
SOT886
74LVC1G11GF 40 C to +125 C XSON6 plastic extremely thin small outline package; leads; 6 terminals; body 11 0.5 mm
SOT891
74LVC1G11GN 40 C to +125C XSON6 extremely thin small outline package; no leads; terminals; body 0.9 1.0 0.35 mm
SOT1115
74LVC1G11GS 40 C to +125C XSON6 extremely thin small outline package; no leads; terminals; body 1.0 1.0 0.35 mm
SOT1202
Table 2. Marking

74LVC1G11GW VU
74LVC1G11GV V11
74LVC1G11GM VU
74LVC1G11GF VU
74LVC1G11GN VU
74LVC1G11GS VU
NXP Semiconductors 74LVC1G11
Single 3-input AND gate
6. Pinning information
6.1 Pinning

6.2 Pin description

7. Functional description

[1] H= HIGH voltage level; L= LOW voltage level; X= don’t care.
Table 3. Pin description
1 data input
GND 2 ground (0V) 3 data input 4 data output
VCC 5 supply voltage 6 data input
Table 4. Function table[1]
HH X L XL L L
NXP Semiconductors 74LVC1G11
Single 3-input AND gate
8. Limiting values

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] When VCC=0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
[3] For SC-88 and SC-74 packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K.
For XSON6 package: above 118 C the value of Ptot derates linearly with 7.8 mW/K.
9. Recommended operating conditions

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
VCC supply voltage 0.5 +6.5 V
IIK input clamping current VI < 0 V 50 - mA input voltage [1] 0.5 +6.5 V
IOK output clamping current VO > VCC or VO < 0 V - 50 mA output voltage Active mode [1][2] 0.5 VCC + 0.5 V
Power-down mode [1][2] 0.5 +6.5 V output current VO = 0 V to VCC - 50 mA
ICC supply current - 100 mA
IGND ground current 100 - mA
Ptot total power dissipation Tamb= 40 C to +125C [3]- 250 mW
Tstg storage temperature 65 +150 C
Table 6. Recommended operating conditions

VCC supply voltage 1.65 - 5.5 V input voltage 0 - 5.5 V output voltage Active mode 0 - VCC V
Power-down mode; VCC =0V 0 - 5.5 V
Tamb ambient temperature 40 - +125 C
t/V input transition rise and fall rate VCC = 1.65 V to 2.7 V - - 20 ns/V
VCC = 2.7 V to 5.5 V - - 10 ns/V
NXP Semiconductors 74LVC1G11
Single 3-input AND gate
10. Static characteristics

[1] All typical values are measured at Tamb = 25 C.
Table 7. Static characteristics

At recommended operating conditions; voltages are referenced to GND (ground=0V).
VIH HIGH-level
input voltage
VCC = 1.65 V to 1.95 V 0.65VCC - - 0.65VCC -V
VCC = 2.3 V to 2.7 V 1.7 - - 1.7 - V
VCC = 2.7 V to 3.6 V 2.0 - - 2.0 - V
VCC = 4.5 V to 5.5 V 0.7VCC - - 0.7VCC -V
VIL LOW-level
input voltage
VCC = 1.65 V to 1.95 V - - 0.35VCC - 0.35VCCV
VCC = 2.3 V to 2.7 V - - 0.7 - 0.7 V
VCC = 2.7 V to 3.6 V - - 0.8 - 0.8 V
VCC = 4.5 V to 5.5 V - - 0.3VCC -0.3VCC V
VOH HIGH-level
output voltage
VI = VIH or VIL
IO = 100 A;
VCC= 1.65V to 5.5 V
VCC  0.1 - - VCC  0.1 - V
IO = 4 mA; VCC = 1.65 V 1.2 1.54 - 0.95 - V
IO = 8 mA; VCC = 2.3 V 1.9 2.15 - 1.7 - V
IO = 12 mA; VCC = 2.7 V 2.2 2.50 - 1.9 - V
IO = 24 mA; VCC = 3.0 V 2.3 2.62 - 2.0 - V
IO = 32 mA; VCC = 4.5 V 3.8 4.11 - 3.4 - V
VOL LOW-level
output voltage
VI = VIH or VIL
IO = 100 A;
VCC= 1.65V to 5.5 V 0.10 - 0.10 V
IO = 4 mA; VCC = 1.65 V - 0.07 0.45 - 0.70 V
IO = 8 mA; VCC = 2.3 V - 0.12 0.30 - 0.45 V
IO = 12 mA; VCC = 2.7 V - 0.17 0.40 - 0.60 V
IO = 24 mA; VCC = 3.0 V - 0.33 0.55 - 0.80 V
IO = 32 mA; VCC = 4.5 V - 0.39 0.55 - 0.80 V input leakage
current
VI = 5.5 V or GND;
VCC =0 Vto 5.5V 0.1 5- 100 A
IOFF power-off
leakage
current
VI or VO = 5.5 V; VCC = 0 V - 0.1 10 - 200 A
ICC supply current VI = 5.5 V or GND; IO = 0 A;
VCC= 1.65Vto 5.5 V 0.1 10 - 200 A
ICC additional
supply current
VI = VCC  0.6 V; IO = 0A;
VCC= 2.3 V to 5.5 V; per pin 5 500 - 5000 A input
capacitance
VCC= 3.3 V; VI =GNDto VCC -4 - - - pF
NXP Semiconductors 74LVC1G11
Single 3-input AND gate
11. Dynamic characteristics

[1] Typical values are measured at Tamb =25 C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.
[2] tpd is the same as tPLH and tPHL.
[3] CPD is used to determine the dynamic power dissipation (PDin W). =CPD VCC2fi N+ (CL VCC2fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in V;= number of inputs switching;
(CL VCC2fo)= sum of the outputs.
12. Waveforms

Table 8. Dynamic characteristics

Voltages are referenced to GND (ground=0 V); for load circuit see Figure8.
tpd propagation delay A,B andCto Y; see Figure7 [2]
VCC = 1.65 V to 1.95 V 1.5 4.7 17.2 1.5 21.5 ns
VCC = 2.3 V to 2.7 V 1.0 3.0 6.2 1.0 7.8 ns
VCC = 2.7 V 1.0 3.0 6.0 1.0 7.5 ns
VCC = 3.0 V to 3.6 V 1.0 2.6 4.9 1.0 6.2 ns
VCC = 4.5 V to 5.5 V 1.0 1.9 3.5 1.0 4.4 ns
CPD power dissipation
capacitance
VI = GND to VCC; VCC= 3.3 V [3] -13- - - pF
NXP Semiconductors 74LVC1G11
Single 3-input AND gate

Table 9. Measurement points

1.65 V to 1.95V 0.5VCC 0.5VCC
2.3 V to 2.7V 0.5VCC 0.5VCC
2.7V 1.5V 1.5V
3.0V to 3.6V 1.5V 1.5V
4.5 V to 5.5V 0.5VCC 0.5VCC
Table 10. Test data

1.65 V to 1.95V VCC  2.0ns 30pF 1k open
2.3 V to 2.7V VCC  2.0ns 30pF 500 open
2.7V 2.7V  2.5ns 50pF 500 open
3.0V to 3.6V 2.7V  2.5ns 50pF 500 open
4.5 V to 5.5V VCC  2.5ns 50pF 500 open
NXP Semiconductors 74LVC1G11
Single 3-input AND gate
13. Package outline

NXP Semiconductors 74LVC1G11
Single 3-input AND gate

ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED