74LVC1G02GW ,Single 2-input NOR gateINTEGRATED CIRCUITSDATA SHEET74LVC1G02Single 2-input NOR gateProduct specification 2004 Sep 07Supers ..
74LVC1G02SE-7 , SINGLE 2 INPUT POSITIVE NOR GATE
74LVC1G04GM ,Single inverterFeatures and benefits Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant inputs for inte ..
74LVC1G04GV ,74LVC1G04; Single inverterLogic diagram74LVC1G04 All information provided in this document is subject to legal disclaimers. ..
74LVC1G04GW ,Single inverterPin configuration SOT886 74LVC1G0474LVC1G04n.c. 1 5 VCCn.c. 1 6 VCC3GNDA 2 5 n.c.A 2 4 YGND 3 4 Y00 ..
74LVC1G06GV ,inverter with open-drain outputFeatures and benefits Wide supply voltage range from 1.65 V to 5.5 V High noise immunity Complie ..
80CNQ045SL ,45V 80A Schottky Common Cathode Diode in a D61-8-SL packageapplications are in switching power supplies, converters, free-waveformwheeling diodes, and reverse ..
80CNT020ASL ,20V 80A Trench Schottky Common Cathode Diode in a D61-8-SL packageBulletin PD-20699 rev. A 12/0280CNT020A80 AmpTRENCH SCHOTTKY RECTIFIERNew GenIII D-61 Package ..
80CNT020ASM ,20V 80A Trench Schottky Common Cathode Diode in a D61-8-SM packageFeaturesMajor Ratings and CharacteristicsThe center tap Schottky rectifier module series has beenop ..
80CPQ020 ,20V 80A Schottky Common Cathode Diode in a TO-247AC packageapplications are in parallel switching power supplies,I Rectangular 80 AF(AV) converters, reverse b ..
80CPQ150PBF , Schottky Rectifier, 2 x 40 A
80CPT015 ,15V 80A Schottky Discrete Diode in a TO-247AC packageFeaturesThis center tap Schottky rectifier has been optimized for ultraCharacteristics Values Uni ..
74LVC1G02GW
Single 2-input NOR gate
Philips Semiconductors Product specification
Single 2-input NOR gate 74L VC1G02
FEATURES Wide supply voltage range from 1.65 Vto 5.5V High noise immunity Complies with JEDEC standard: JESD8-7 (1.65Vto 1.95V) JESD8-5 (2.3Vto 2.7V) JESD8B/JESD36 (2.7Vto 3.6V).
•±24 mA output drive (VCC= 3.0V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Inputs accept voltages up to 5V Multiple package options ESD protection:
HBM EIA/JESD22-A114-B exceeds 2000V
MM EIA/JESD22-A115-A exceeds 200V. Specified from −40°Cto +85°C and −40°Cto +125 °C.
DESCRIPTIONThe 74LVC1G02 is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
Input can be driven from either 3.3Vor5 V devices.
These features allow the use of these devices in a mixed
3.3V and5 V environment.
Schmitttrigger actionatall inputs makesthe circuit tolerant
for slower input rise and fall time.
This device is fully specified for partial power-down
applications using Ioff. TheIoff circuitry disables the output,
preventing the damaging backflow current through the
device when it is powered down.
The 74LVC1G02 provides the single 2-input NOR
function.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 2.5 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi× N+ Σ(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts;= total load switching outputs;
Σ(CL× VCC2×fo)= sum of the outputs. The condition is VI= GNDto VCC.
Philips Semiconductors Product specification
Single 2-input NOR gate 74L VC1G02
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level.
ORDERING INFORMATION
PINNING
Philips Semiconductors Product specification
Single 2-input NOR gate 74L VC1G02
Philips Semiconductors Product specification
Single 2-input NOR gate 74L VC1G02
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. When VCC=0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
Philips Semiconductors Product specification
Single 2-input NOR gate 74L VC1G02
CHARACTERISTICSAt recommended operating conditions; voltages are referenced to GND (ground=0 V).
Philips Semiconductors Product specification
Single 2-input NOR gate 74L VC1G02
Note All typical values are measured at VCC= 3.3 V and Tamb =25 °C.
