IC Phoenix
 
Home ›  7715 > 74HC4053BQ-74HCT4053PW,Triple 2-channel analog multiplexer/demultiplexer
74HC4053BQ-74HCT4053PW Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74HC4053BQPHILIPSN/a3000avaiTriple 2-channel analog multiplexer/demultiplexer
74HCT4053PWPHN/a150avaiTriple 2-channel analog multiplexer/demultiplexer
74HCT4053PWNXPN/a1448avaiTriple 2-channel analog multiplexer/demultiplexer


74HC4053BQ ,Triple 2-channel analog multiplexer/demultiplexerFeatures and benefits Wide analog input voltage range from 5 V to +5 V Low ON resistance: 80 ( ..
74HC4053D ,Triple 2-channel analog multiplexer/demultiplexerINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC4053DB ,Triple 2-channel analog multiplexer/demultiplexerINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC4053N ,Triple 2-channel analog multiplexer/demultiplexerINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC4053PW ,Triple 2-channel analog multiplexer/demultiplexerGENERAL DESCRIPTIONV - V may not exceed 10.0 V.CC EEThe 74HC/HCT4053 are high-speed Si-gate CMOSFor ..
74HC4059 ,Programmable divide-by-n counterFEATURES In the divide-by-n mode, a clock cycle wide pulse isgenerated with a frequency rate equal ..
74LVTH16244 ,Low Voltage16-Bit Buffer/Line Driver with 3-STATE OutputsLOGIC DIAGRAMMAX at V =0Vto1.5V,V =1.5Vto0V,TCC CC A=85°C

74HC4053BQ-74HCT4053PW
Triple 2-channel analog multiplexer/demultiplexer
1. General description
The 74HC4053; 74HCT4053 is a high-speed Si-gate CMOS device and is pin compatible
with the HEF4053B. It is specified in compliance with JEDEC standard no. 7A.
The 74HC4053; 74HCT4053 is triple 2-channel analog multiplexer/demultiplexer with a
common enable input (E). Each multiplexer/demultiplexer has two independent
inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital select
inputs (Sn). With E LOW, one of the two switches is selected (low-impedance ON-state)
by S1 to S3. With E HIGH, all switches are in the high-impedance OFF-state, independent
of S1 to S3.
VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E).
The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4053 and 4.5 V to 5.5 V for
74HCT4053. The analog inputs/outputs (nY0 to nY1, and nZ) can swing between VCC as
a positive limit and VEE as a negative limit. VCC VEE may not exceed 10.0V.
For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically
ground).
2. Features and benefits
Wide analog input voltage range from 5 V to +5V Low ON resistance:80 (typical) at VCC VEE =4.5V70 (typical) at VCC VEE =6.0V60 (typical) at VCC VEE =9.0V Logic level translation: to enable 5 V logic to communicate with 5 V analog signals Typical ‘break before make’ built-in ESD protection: HBM JESD22-A114F exceeds 2000V MM JESD22-A115-A exceeds 200V CDM JESD22-C101E exceeds 1000V Multiple package options Specified from 40 Cto +85 C and 40 Cto +125C
74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
Rev. 8 — 19 July 2012 Product data sheet
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
3. Applications
Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating
4. Ordering information
Table 1. Ordering information
74HC4053N 40 Cto +125 C DIP16 plastic dual in-line package; 16 leads (300 mil) SOT38-4
74HCT4053N
74HC4053D 40 Cto +125 C SO16 plastic small outline package; 16 leads;
body width 3.9 mm
SOT109-1
74HCT4053D
74HC4053DB 40 Cto +125 C SSOP16 plastic shrink small outline package; 16 leads;
body width 5.3 mm
SOT338-1
74HCT4053DB
74HC4053PW 40 Cto +125 C TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1
74HCT4053PW
74HC4053BQ 40 Cto +125 C DHVQFN16 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals;
body 2.5 3.5 0.85 mm
SOT763-1
74HCT4053BQ
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
5. Functional diagram

NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

6. Pinning information
6.1 Pinning

NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
6.2 Pin description

7. Functional description

[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care.
8. Limiting values

[1] To avoid drawing VCC current out of terminal nZ, when switch current flows into terminals nYn, the voltage drop across the bidirectional
switch must not exceed 0.4 V. If the switch current flows into terminal nZ, no VCC current will flow out of terminals nYn, and in this case
there is no limit for the voltage drop across the switch, but the voltages at nYn and nZ may not exceed VCC or VEE.
[2] For DIP16 packages: above 70 C the value of Ptot derates linearly with 12 mW/K.
Table 2. Pin description
6 enable input (active LOW)
VEE 7 supply voltage
GND 8 ground supply voltage
S1, S2, S3 11, 10, 9 select input
1Y0, 2Y0, 3Y0 12, 2, 5 independent input or output
1Y1, 2Y1, 3Y1 13, 1, 3 independent input or output
1Z, 2Z, 3Z 14, 15, 4 common output or input
VCC 16 supply voltage
Table 3. Function table[1]

LLnY0 to nZ H nY1 to nZ X switches off
Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).
VCC supply voltage [1] 0.5 +11.0 V
IIK input clamping current VI< 0.5 V or VI >VCC +0.5V - 20 mA
ISK switch clamping current VSW< 0.5 V or VSW >VCC +0.5V - 20 mA
ISW switch current 0.5V< VSW IEE supply current - 20 mA
ICC supply current - 50 mA
IGND ground current - 50 mA
Tstg storage temperature 65 +150 C
Ptot total power dissipation DIP16 package [2]- 750 mW
SO16, (T)SSOP16, and
DHVQFN16 package
[3]- 500 mW power dissipation per switch - 100 mW
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

[3] For SO16 packages: above 70 C the value of Ptot derates linearly with 8 mW/K.
For SSOP16 and TSSOP16 packages: above 60 C the value of Ptot derates linearly with 5.5 mW/K.
For DHVQFN16 packages: above 60 C the value of Ptot derates linearly with 4.5 mW/K.
9. Recommended operating conditions

Table 5. Recommended operating conditions

VCC supply voltage see Figure7
and Figure8
VCC GND 2.0 5.0 10.0 4.5 5.0 5.5 V
VCC VEE 2.0 5.0 10.0 2.0 5.0 10.0 V input voltage GND - VCC GND - VCC V
VSW switch voltage VEE -VCC VEE -VCC V
Tamb ambient temperature 40 +25 +125 40 +25 +125 C
t/V input transition rise and fall
rate
VCC= 2.0V - - 625 - - - ns/V
VCC= 4.5V - 1.67 139 - 1.67 139 ns/V
VCC =6.0V - - 83 - - - ns/V
VCC= 10.0V - - 31 - - - ns/V
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
10. Static characteristics
Table 6. RON resistance per switch for 74HC4053 and 74HCT4053
VI = VIH or VIL; for test circuit see Figure9.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
For 74HC4053: VCC GND or VCC VEE = 2.0 V, 4.5 V, 6.0 V and 9.0V.
For 74HCT4053: VCC GND= 4.5 V and 5.5 V, VCC VEE= 2.0 V, 4.5 V, 6.0 V and 9.0V.
Tamb =25
C
RON(peak) ON resistance (peak) Vis =VCCto VEE
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] --- 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A- 100 180 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A- 90 160 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A- 70 130 
RON(rail) ON resistance (rail) Vis =VEE
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] -150 - 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A- 80 140 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A- 70 120 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A- 60 105 
Vis =VCC
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] -150 - 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A- 90 160 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A- 80 140 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A- 65 120 
RON ON resistance mismatch
between channels
Vis =VCC to VEE
VCC = 2.0 V; VEE = 0 V [1] --- 
VCC = 4.5 V; VEE = 0 V - 9 - 
VCC = 6.0 V; VEE = 0 V - 8 - 
VCC = 4.5 V; VEE = 4.5 V - 6 - 
Tamb=
40 Cto+85C
RON(peak) ON resistance (peak) Vis =VCCto VEE
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] --- 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A --225 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A --200 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A --165 
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

[1] When supply voltages (VCC VEE) near 2.0 V the analog switch ON resistance becomes extremely non-linear. When using a supply of V, it is recommended to use these devices only for transmitting digital signals.
RON(rail) ON resistance (rail) Vis =VEE
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] --- 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A --175 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A --150 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A --130 
Vis =VCC
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] --- 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A --200 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A --175 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A --150 
Tamb=
40Cto +125C
RON(peak) ON resistance (peak) Vis =VCCto VEE
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] --- 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A --270 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A --240 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A --195 
RON(rail) ON resistance (rail) Vis =VEE
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] --- 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A --210 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A --180 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A --160 
Vis =VCC
VCC = 2.0 V; VEE = 0 V; ISW= 100 A [1] --- 
VCC = 4.5 V; VEE = 0 V; ISW= 1000 A --240 
VCC = 6.0 V; VEE = 0 V; ISW= 1000 A --210 
VCC = 4.5 V; VEE = 4.5 V; ISW = 1000 A --180 
Table 6. RON resistance per switch for 74HC4053 and 74HCT4053 …continued

VI = VIH or VIL; for test circuit see Figure9.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
For 74HC4053: VCC GND or VCC VEE = 2.0 V, 4.5 V, 6.0 V and 9.0V.
For 74HCT4053: VCC GND= 4.5 V and 5.5 V, VCC VEE= 2.0 V, 4.5 V, 6.0 V and 9.0V.
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

Table 7. Static characteristics for 74HC4053

Voltages are referenced to GND (ground=0V).
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input.
Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output.
Tamb =25
C
VIH HIGH-level input
voltage
VCC = 2.0 V 1.5 1.2 - V
VCC = 4.5 V 3.15 2.4 - V
VCC = 6.0 V 4.2 3.2 - V
VCC = 9.0 V 6.3 4.7 - V
VIL LOW-level input
voltage
VCC = 2.0 V - 0.8 0.5 V
VCC = 4.5 V - 2.1 1.35 V
VCC = 6.0 V - 2.8 1.8 V
VCC = 9.0 V - 4.3 2.7 V input leakage current VEE = 0 V; VI =VCCor GND
VCC = 6.0 V - - 0.1 A
VCC = 10.0 V - - 0.2 A
IS(OFF) OFF-state leakage
current
VCC = 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure11
per channel - - 0.1 A
all channels - - 0.1 A
IS(ON) ON-state leakage
current =VIHor VIL; VSW =VCC VEE;
VCC= 10.0 V; VEE = 0 V; see Figure12 0.1 A
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

ICC supply current VEE = 0 V; VI =VCCor GND; Vis =VEEor VCC;
Vos =VCCor VEE
VCC = 6.0 V - - 8.0 A
VCC = 10.0 V - - 16.0 A input capacitance - 3.5 - pF
Csw switch capacitance independent pins nYn - 5 - pF
common pins nZ - 8 - pF
Tamb=
40 Cto+85C
VIH HIGH-level input
voltage
VCC = 2.0 V 1.5 - - V
VCC = 4.5 V 3.15 - - V
VCC = 6.0 V 4.2 - - V
VCC = 9.0 V 6.3 - - V
VIL LOW-level input
voltage
VCC = 2.0 V - - 0.5 V
VCC = 4.5 V - - 1.35 V
VCC = 6.0 V - - 1.8 V
VCC = 9.0 V - - 2.7 V input leakage current VEE = 0 V; VI =VCCor GND
VCC = 6.0 V - - 1.0 A
VCC = 10.0 V - - 2.0 A
IS(OFF) OFF-state leakage
current
VCC = 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure11
per channel - - 1.0 A
all channels - - 1.0 A
IS(ON) ON-state leakage
current =VIHor VIL; VSW =VCC VEE;
VCC= 10.0 V; VEE = 0 V; see Figure12 1.0 A
ICC supply current VEE = 0 V; VI =VCCor GND; Vis =VEEor VCC;
Vos =VCCor VEE
VCC = 6.0 V - - 80.0 A
VCC = 10.0 V - - 160.0 A
Tamb=
40Cto +125C
VIH HIGH-level input
voltage
VCC = 2.0 V 1.5 - - V
VCC = 4.5 V 3.15 - - V
VCC = 6.0 V 4.2 - - V
VCC = 9.0 V 6.3 - - V
VIL LOW-level input
voltage
VCC = 2.0 V - - 0.5 V
VCC = 4.5 V - - 1.35 V
VCC = 6.0 V - - 1.8 V
VCC = 9.0 V - - 2.7 V
Table 7. Static characteristics for 74HC4053 …continued

Voltages are referenced to GND (ground=0V).
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input.
Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output.
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
input leakage current VEE = 0 V; VI =VCCor GND
VCC = 6.0 V - - 1.0 A
VCC = 10.0 V - - 2.0 A
IS(OFF) OFF-state leakage
current
VCC = 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure11
per channel - - 1.0 A
all channels - - 1.0 A
IS(ON) ON-state leakage
current =VIHor VIL; VSW =VCC VEE;
VCC= 10.0 V; VEE = 0 V; see Figure12 1.0 A
ICC supply current VEE = 0 V; VI =VCCor GND; Vis =VEEor VCC;
Vos =VCCor VEE
VCC = 6.0 V - - 160.0 A
VCC = 10.0 V - - 320.0 A
Table 7. Static characteristics for 74HC4053 …continued

Voltages are referenced to GND (ground=0V).
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input.
Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output.
Table 8. Static characteristics for 74HCT4053

Voltages are referenced to GND (ground=0V).
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input.
Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output.
Tamb =25
C
VIH HIGH-level input
voltage
VCC = 4.5 V to 5.5 V 2.0 1.6 - V
VIL LOW-level input
voltage
VCC = 4.5 V to 5.5 V - 1.2 0.8 V input leakage current VI =VCCor GND; VCC = 5.5 V; VEE = 0 V - - 0.1 A
IS(OFF) OFF-state leakage
current
VCC = 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure11
per channel - - 0.1 A
all channels - - 0.1 A
IS(ON) ON-state leakage
current
VCC= 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure12 0.1 A
ICC supply current VI =VCCor GND; Vis =VEEor VCC;
Vos =VCCor VEE
VCC = 5.5 V; VEE = 0 V - - 8.0 A
VCC = 5.0 V; VEE = 5.0 V - - 16.0 A
ICC additional supply
current
per input; VI =VCC 2.1 V; other inputs at VCC
or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V 50 180 A input capacitance - 3.5 - pF
Csw switch capacitance independent pins nYn - 5 - pF
common pins nZ - 8 - pF
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
Tamb=
40 Cto+85C
VIH HIGH-level input
voltage
VCC = 4.5 V to 5.5 V 2.0 - - V
VIL LOW-level input
voltage
VCC = 4.5 V to 5.5 V - - 0.8 V input leakage current VI =VCCor GND; VCC = 5.5 V; VEE = 0 V - - 1.0 A
IS(OFF) OFF-state leakage
current
VCC = 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure11
per channel - - 1.0 A
all channels - - 1.0 A
IS(ON) ON-state leakage
current
VCC= 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure12 1.0 A
ICC supply current VI =VCCor GND; Vis =VEEor VCC;
Vos =VCCor VEE
VCC = 5.5 V; VEE = 0 V - - 80.0 A
VCC = 5.0 V; VEE = 5.0 V - - 160.0 A
ICC additional supply
current
per input; VI =VCC 2.1 V; other inputs at VCC
or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V - 225 A
Tamb=
40Cto +125C
VIH HIGH-level input
voltage
VCC = 4.5 V to 5.5 V 2.0 - - V
VIL LOW-level input
voltage
VCC = 4.5 V to 5.5 V - - 0.8 V input leakage current VI =VCCor GND; VCC = 5.5 V; VEE = 0 V - - 1.0 A
IS(OFF) OFF-state leakage
current
VCC = 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure11
per channel - - 1.0 A
all channels - - 1.0 A
IS(ON) ON-state leakage
current
VCC= 10.0 V; VEE = 0 V; VI =VIHor VIL; VSW =VCC VEE; see Figure12 1.0 A
ICC supply current VI =VCCor GND; Vis =VEEor VCC;
Vos =VCCor VEE
VCC = 5.5 V; VEE = 0 V - - 160.0 A
VCC = 5.0 V; VEE = 5.0 V - - 320.0 A
ICC additional supply
current
per input; VI =VCC 2.1 V; other inputs at VCC
or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V - 245 A
Table 8. Static characteristics for 74HCT4053 …continued

Voltages are referenced to GND (ground=0V).
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input.
Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output.
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

11. Dynamic characteristics

Table 9. Dynamic characteristics for 74HC4053

GND=0 V; tr=tf =6ns; CL=50 pF; for test circuit see Figure 15.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
Tamb =25
C
tpd propagation delay Vis to Vos; RL=  ; see Figure13 [1]
VCC = 2.0 V; VEE= 0 V - 15 60 ns
VCC = 4.5 V; VEE =0 V - 5 12 ns
VCC = 6.0 V; VEE =0 V - 4 10 ns
VCC = 4.5 V; VEE= 4.5 V - 4 8 ns
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

ton turn-on time E to Vos; RL= ; see Figure14 [2]
VCC = 2.0 V; VEE= 0 V - 60 220 ns
VCC = 4.5 V; VEE= 0 V - 20 44 ns
VCC = 5.0 V; VEE =0 V; CL = 15 pF - 17 - ns
VCC = 6.0 V; VEE= 0 V - 16 37 ns
VCC = 4.5 V; VEE= 4.5 V - 15 31 ns
Sn to Vos; RL= ; see Figure14 [2]
VCC = 2.0 V; VEE= 0 V - 75 220 ns
VCC = 4.5 V; VEE= 0 V - 25 44 ns
VCC = 5.0 V; VEE =0 V; CL = 15 pF - 21 - ns
VCC = 6.0 V; VEE= 0 V - 20 37 ns
VCC = 4.5 V; VEE= 4.5 V - 15 31 ns
toff turn-off time E to Vos; RL =1 k; see Figure14 [3]
VCC = 2.0 V; VEE= 0 V - 63 210 ns
VCC = 4.5 V; VEE= 0 V - 21 42 ns
VCC = 5.0 V; VEE =0 V; CL = 15 pF - 18 - ns
VCC = 6.0 V; VEE= 0 V - 17 36 ns
VCC = 4.5 V; VEE= 4.5 V - 15 29 ns
Sn to Vos; RL =1 k; see Figure14 [3]
VCC = 2.0 V; VEE= 0 V - 60 210 ns
VCC = 4.5 V; VEE= 0 V - 20 42 ns
VCC = 5.0 V; VEE =0 V; CL = 15 pF - 17 - ns
VCC = 6.0 V; VEE= 0 V - 16 36 ns
VCC = 4.5 V; VEE= 4.5 V - 15 29 ns
CPD power dissipation
capacitance
per switch; VI = GND to VCC [4] -36 - pF
Tamb=
40 Cto+85C
tpd propagation delay Vis to Vos; RL=  ; see Figure13 [1]
VCC = 2.0 V; VEE =0 V - - 75 ns
VCC = 4.5 V; VEE =0 V - - 15 ns
VCC = 6.0 V; VEE =0 V - - 13 ns
VCC = 4.5 V; VEE= 4.5 V - - 10 ns
Table 9. Dynamic characteristics for 74HC4053 …continued

GND=0 V; tr=tf =6ns; CL=50 pF; for test circuit see Figure 15.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

ton turn-on time E to Vos; RL= ; see Figure14 [2]
VCC = 2.0 V; VEE =0 V - - 275 ns
VCC = 4.5 V; VEE =0 V - - 55 ns
VCC = 6.0 V; VEE =0 V - - 47 ns
VCC = 4.5 V; VEE= 4.5 V - - 39 ns
Sn to Vos; RL= ; see Figure14 [2]
VCC = 2.0 V; VEE =0 V - - 275 ns
VCC = 4.5 V; VEE =0 V - - 55 ns
VCC = 6.0 V; VEE =0 V - - 47 ns
VCC = 4.5 V; VEE= 4.5 V - - 39 ns
toff turn-off time E to Vos; RL =1 k; see Figure14 [3]
VCC = 2.0 V; VEE =0 V - - 265 ns
VCC = 4.5 V; VEE =0 V - - 53 ns
VCC = 6.0 V; VEE =0 V - - 45 ns
VCC = 4.5 V; VEE= 4.5 V - - 36 ns
Sn to Vos; RL =1 k; see Figure14 [3]
VCC = 2.0 V; VEE =0 V - - 265 ns
VCC = 4.5 V; VEE =0 V - - 53 ns
VCC = 6.0 V; VEE =0 V - - 45 ns
VCC = 4.5 V; VEE= 4.5 V - - 36 ns
Tamb=
40Cto +125C
tpd propagation delay Vis to Vos; RL=  ; see Figure13 [1]
VCC = 2.0 V; VEE =0 V - - 90 ns
VCC = 4.5 V; VEE =0 V - - 18 ns
VCC = 6.0 V; VEE =0 V - - 15 ns
VCC = 4.5 V; VEE= 4.5 V - - 12 ns
ton turn-on time E to Vos; RL= ; see Figure14 [2]
VCC = 2.0 V; VEE =0 V - - 330 ns
VCC = 4.5 V; VEE =0 V - - 66 ns
VCC = 6.0 V; VEE =0 V - - 56 ns
VCC = 4.5 V; VEE= 4.5 V - - 47 ns
Sn to Vos; RL= ; see Figure14 [2]
VCC = 2.0 V; VEE =0 V - - 330 ns
VCC = 4.5 V; VEE =0 V - - 66 ns
VCC = 6.0 V; VEE =0 V - - 56 ns
VCC = 4.5 V; VEE= 4.5 V - - 47 ns
Table 9. Dynamic characteristics for 74HC4053 …continued

GND=0 V; tr=tf =6ns; CL=50 pF; for test circuit see Figure 15.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
NXP Semiconductors 74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer

[1] tpd is the same as tPHL and tPLH.
[2] ton is the same as tPZH and tPZL.
[3] toff is the same as tPHZ and tPLZ.
[4] CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD  VCC2fi N + {(CL +Csw)  VCC2  fo} where:
fi = input frequency in MHz;
fo = output frequency in MHz;
N = number of inputs switching;
{(CL +Csw)  VCC2  fo} = sum of outputs;
CL = output load capacitance in pF;
Csw = switch capacitance in pF;
VCC = supply voltage in V.
toff turn-off time E to Vos; RL =1 k; see Figure14 [3]
VCC = 2.0 V; VEE =0 V - - 315 ns
VCC = 4.5 V; VEE =0 V - - 63 ns
VCC = 6.0 V; VEE =0 V - - 54 ns
VCC = 4.5 V; VEE= 4.5 V - - 44 ns
Sn to Vos; RL =1 k; see Figure14 [3]
VCC = 2.0 V; VEE =0 V - - 315 ns
VCC = 4.5 V; VEE =0 V - - 63 ns
VCC = 6.0 V; VEE =0 V - - 54 ns
VCC = 4.5 V; VEE= 4.5 V - - 44 ns
Table 9. Dynamic characteristics for 74HC4053 …continued

GND=0 V; tr=tf =6ns; CL=50 pF; for test circuit see Figure 15.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
Table 10. Dynamic characteristics for 74HCT4053

GND=0 V; tr=tf =6ns; CL=50 pF; for test circuit see Figure 15.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
Tamb =25
C
tpd propagation delay Vis to Vos; RL= ; see Figure13 [1]
VCC = 4.5 V; VEE =0 V - 5 12 ns
VCC = 4.5 V; VEE= 4.5 V - 4 8 ns
ton turn-on time E to Vos; RL =1 k; see Figure14 [2]
VCC = 4.5 V; VEE= 0 V - 27 48 ns
VCC = 5.0 V; VEE =0 V; CL = 15 pF - 23 - ns
VCC = 4.5 V; VEE= 4.5 V - 16 34 ns
Sn to Vos; RL =1 k; see Figure14 [2]
VCC = 4.5 V; VEE= 0 V - 25 48 ns
VCC = 5.0 V; VEE =0 V; CL = 15 pF - 21 - ns
VCC = 4.5 V; VEE= 4.5 V - 16 34 ns
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED