IC Phoenix
 
Home ›  7717 > 74HC4353D-74HCT4353D-74HCT4353N,74HC/HCT4353; Triple 2-channel analog multiplexer/demultiplexer with latch
74HC4353D-74HCT4353D-74HCT4353N Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74HC4353DPHILIPSN/a76avaiTriple 2-channel analog multiplexer/demultiplexer with latch
74HCT4353DPHILIPSN/a36000avai74HC/HCT4353; Triple 2-channel analog multiplexer/demultiplexer with latch
74HCT4353DPHIN/a1000avai74HC/HCT4353; Triple 2-channel analog multiplexer/demultiplexer with latch
74HCT4353NPHILIPSN/a713avaiTriple 2-channel analog multiplexer/demultiplexer with latch


74HCT4353D ,74HC/HCT4353; Triple 2-channel analog multiplexer/demultiplexer with latchFEATURES multiplexer has two independent inputs/outputs (nY and0nY ), a common input/output (nZ) an ..
74HCT4353D ,74HC/HCT4353; Triple 2-channel analog multiplexer/demultiplexer with latchINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HCT4353N ,Triple 2-channel analog multiplexer/demultiplexer with latchGENERAL DESCRIPTIONranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT.The 74HC/HCT4353 are hi ..
74HCT4511D ,BCD to 7-segment latch/decoder/driverINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HCT4514 ,4-to-16 line decoder/demultiplexer with input latches
74HCT4514 ,4-to-16 line decoder/demultiplexer with input latches
74VHCU04SJX ,Hex InverterFeaturesThe VHCU04 is an advanced high speed CMOS Inverter

74HC4353D-74HCT4353D-74HCT4353N
74HC/HCT4353; Triple 2-channel analog multiplexer/demultiplexer with latch

Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer with latch 74HC/HCT4353
FEATURES
Wide analog input voltage range:± 5 V Low “ON” resistance:Ω (typ.) at VCC− VEE= 4.5 VΩ (typ.) at VCC− VEE= 6.0 VΩ (typ.) at VCC− VEE= 9.0 V Logic level translation:
to enable 5 V logic to communicate with± 5 V analog
signals Typical “break before make” built in Address latches provided Output capability: non-standard ICC category: MSI
GENERAL DESCRIPTION

The 74HC/HCT4353 are high-speed Si-gate CMOS
devices. They are specified in compliance with JEDEC
standard no. 7A.
The 74HC/HCT4353 are triple 2-channel analog
multiplexers/demultiplexers with two common enable
inputs (E1 and E2) and a latch enable input (LE). Each
multiplexer has two independent inputs/outputs (nY0 and
nY1), a common input/output (nZ) and select inputs (S1to
S3).
Each multiplexer/demultiplexer contains two bidirectional
analog switches, each with one side connected to an
independent input/output (nY0 and nY1) and the other side
connected to a common input/output (nZ).
WithE1 LOW and E2 HIGH, one of the two switches is
selected (low impedance ON-state) by S1 to S3.
The data at the select inputs may be latched by using the
active LOW latch enable input (LE). WhenLE is HIGH, the
latch is transparent. When either of the two enable inputs, (active LOW) and E2 (active HIGH), is inactive, all
analog switches are turned off.
VCC and GND are the supply voltage pins for the digital
control inputs (S1 to S3, LE,E1 and E2). The VCC to GND
ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT.
The analog inputs/outputs (nY0 and nY1, and nZ) can
swing between VCC as a positive limit and VEE as a
negative limit. VCC− VEE may not exceed 10.0 V.
For operation as a digital multiplexer/demultiplexer, VEEis
connected to GND (typically ground).
QUICK REFERENCE DATA

VEE= GND = 0 V; Tamb = 25 °C;tr = tf = 6 ns
Notes
CPD is used to determine the dynamic power
dissipation (PDin μW):=
CPD× VCC2×fi+∑ {(CL +CS)× VCC2×fo} where: = input frequency in MHz= output load capacitance in pF = output frequency in MHz {(CL ×CS)× VCC2×fo} = sum of outputs
VCC= supply voltage in V For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC− 1.5 V
ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package
Information”.
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer with latch 74HC/HCT4353
PIN DESCRIPTION
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer with latch 74HC/HCT4353
FUNCTION TABLE
Notes
Last selected channel “ON”. Selected channels latched.= HIGH voltage level = LOW voltage level= don’t care= HIGH-to-LOWLE transition
APPLICATIONS
Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer with latch 74HC/HCT4353
RATINGS

Limiting values in accordance with the Absolute Maximum System (IEC 134)
Voltages are referenced to VEE= GND (ground = 0 V)
Note to ratings
To avoid drawing VCC current out of terminals nZ, when switch current flows in terminals nYn, the voltage drop across
the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminals nZ, no VCC current will flow
out of terminals nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at nYn and
nZ may not exceed VCC or VEE.
RECOMMENDED OPERATING CONDITIONS
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer with latch 74HC/HCT4353
DC CHARACTERISTICS FOR 74HC/HCT

For 74HC: VCC− GND or VCC− VEE = 2.0, 4.5, 6.0 and 9.0 V
For 74HCT: VCC− GND = 4.5 and 5.5 V; VCC− VEE = 2.0, 4.5, 6.0 and 9.0 V
Notes to DC characteristics
At supply voltages (VCC− VEE) approaching 2.0 V the analog switch ON-resistance becomes extremely non-linear.
There it is recommended that these devices be used to transmit digital signals only, when using these supply
voltages.
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer with latch 74HC/HCT4353
DC CHARACTERISTICS FOR 74HC

Voltages are referenced to GND (ground = 0 V)
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer with latch 74HC/HCT4353
AC CHARACTERISTICS FOR 74HC

GND= 0 V; tr =tf= 6 ns; CL= 50 pF
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED