IC Phoenix
 
Home ›  7710 > 74ALVT162241DGG,2.5V/3.3V 16-bit buffer/driver with 30 Ohm termination resistors (3-State)
74ALVT162241DGG Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74ALVT162241DGGPHIN/a1952avai2.5V/3.3V 16-bit buffer/driver with 30 Ohm termination resistors (3-State)


74ALVT162241DGG ,2.5V/3.3V 16-bit buffer/driver with 30 Ohm termination resistors (3-State)applications such as memory address drivers, clock drivers and bus• Bus-hold data inputs eliminate ..
74ALVT162244 ,2.5 V / 3.3 V 16-bit buffer/driver with 30 Ohm termination resistors (3-State)
74ALVT162244 ,2.5 V / 3.3 V 16-bit buffer/driver with 30 Ohm termination resistors (3-State)
74ALVT162244DGG ,2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-Stateapplications such as memory address drivers, clock drivers,• TTL input and output switching levelsa ..
74ALVT162245DL ,2.5V/3.3V ALVT 16-bit transceiver with 30ohm termination resistors 3-Stateapplications such as memory address drivers, clock drivers,• Outputs include series resistance of 3 ..
74ALVT162245DL ,2.5V/3.3V ALVT 16-bit transceiver with 30ohm termination resistors 3-StateFEATURES DESCRIPTIONThe 74ALVT162245 is a high-performance BiCMOS product• 16-bit bidirectional bus ..
74HC563N ,74HC/HCT563; Octal D-type transparent latch; 3-state; invertingINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC564D ,Octal D-type flip-flop; positive-edge trigger; 3-state; inverting
74HC564N ,Octal D-type flip-flop; positive-edge trigger; 3-state; inverting
74HC564N ,Octal D-type flip-flop; positive-edge trigger; 3-state; invertingapplications. A clock (CP) and an outputenable (OE) input are common to all flip-flops.The 8 flip-flops ..
74HC573BQ ,74HC/HCT573; Octal D-type transparent latch; 3-stateapplications.the high impedance OFF-state.and “373”A latch enable (LE) input and anOperation of the ..
74HC573D ,Octal D-type transparent latch; 3-stateINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..


74ALVT162241DGG
2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-State
Product specification
Supersedes data of 1997 Dec 16
IC23 Data Handbook
1998 Feb 13
Philips Semiconductors Product specification
74ALVT1622412.5V/3.3V 16-bit buffer/driver with
30 termination resistors (3-State)
FEATURES
16-bit bus interface 5V I/O Compatible 3-State buffers Output capability: +12mA/-12mA TTL input and output switching levels Input and output interface capability to systems at 5V supply Bus-hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs Outputs include series resistance of 30 making external
termination resistors unnecessary Live insertion/extraction permitted Power-up 3-State No bus current loading when output is tied to 5V bus Latch-up protection exceeds 500mA per JEDEC Std 17 ESD protection exceeds 2000V per MIL STD 883 Method 3015
and 200V per Machine Model
DESCRIPTION

The 74ALVT162241 is a high-performance BiCMOS product designed
for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V.
This device is a 16-bit buffer that is ideal for driving bus lines. The
device features four Output Enables (1OE, 2OE, 3OE, 4OE), each
controlling four of the 3-State outputs.
The 74ALVT162241 is designed with 30 series resistance in both
High and Low output stages. This design reduces the line noise in
applications such as memory address drivers, clock drivers and bus
receivers/transmitters. The series termination resistors reduce
overshoot and undershoot and are ideal for driving memory arrays.
QUICK REFERENCE DATA
ORDERING INFORMATION
LOGIC SYMBOL
SCHEMATIC OF EACH OUTPUT
Philips Semiconductors Product specification
74ALVT1622412.5V/3.3V 16-bit buffer/driver with
30 termination resistors (3-State)
PIN CONFIGURATION
LOGIC SYMBOL (IEEE/IEC)
PIN DESCRIPTION
FUNCTION TABLE

H = High voltage level
L = Low voltage level
X = Don’t care
Z = High Impedance “off” state
Philips Semiconductors Product specification
74ALVT1622412.5V/3.3V 16-bit buffer/driver with
30 termination resistors (3-State)
ABSOLUTE MAXIMUM RATINGS1, 2
NOTES:
Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
Philips Semiconductors Product specification
74ALVT1622412.5V/3.3V 16-bit buffer/driver with
30 termination resistors (3-State)
DC ELECTRICAL CHARACTERISTICS (3.3V 0.3V RANGE)
NOTES:
All typical values are at VCC = 3.3V and Tamb = 25°C. This is the increase in supply current for each input at the specified voltage level other than VCC or GND This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 3.3V ± 0.3V a
transition time of 100μsec is permitted. This parameter is valid for Tamb = 25°C only. Unused pins at VCC or GND. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. This is the bus hold overdrive current required to force the input to the opposite logic state.
AC CHARACTERISTICS (3.3V 0.3V RANGE)

GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
NOTE:
All typical values are at VCC = 3.3V and Tamb = 25°C.
Philips Semiconductors Product specification
74ALVT1622412.5V/3.3V 16-bit buffer/driver with
30 termination resistors (3-State)
DC ELECTRICAL CHARACTERISTICS (2.5V 0.2V RANGE)
NOTES:
All typical values are at VCC = 2.5V and Tamb = 25°C. This is the increase in supply current for each input at the specified voltage level other than VCC or GND This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 2.5V ± 0.2V a
transition time of 100μsec is permitted. This parameter is valid for Tamb = 25°C only. Unused pins at VCC or GND. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. Not guaranteed.
AC CHARACTERISTICS (2.5V 0.2V RANGE)

GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
NOTE:
All typical values are at VCC = 2.5V and Tamb = 25°C.
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED