IC Phoenix
 
Home ›  7710 > 74ALVCHS162830AGR,1-Bit To 2-Bit Address Driver With 3-State Outputs
74ALVCHS162830AGR Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74ALVCHS162830AGRTIN/a4000avai1-Bit To 2-Bit Address Driver With 3-State Outputs


74ALVCHS162830AGR ,1-Bit To 2-Bit Address Driver With 3-State Outputs        SCES624 − FEBRUARY 2005DBB PACKAGE Me ..
74ALVCHS162830DGB ,18-bit to 36-bit address driver with bus hold (3-State)
74ALVCHS16830DGB ,74ALVCHS16830; 18-bit to 36-bit address driver with bus hold (3-State)
74ALVT162240DL ,16-bit inverting buffer/driver with 30 Ohm termination resistors (3-State)applications such as memory address drivers, clock drivers,• Bus-hold data inputs eliminate the nee ..
74ALVT162240DL ,16-bit inverting buffer/driver with 30 Ohm termination resistors (3-State)features four Output Enables (1OE, 2OE, 3OE,• Output capability: +12mA/-12mA4OE), each controlling ..
74ALVT162241DGG ,2.5V/3.3V 16-bit buffer/driver with 30 Ohm termination resistors (3-State)applications such as memory address drivers, clock drivers and bus• Bus-hold data inputs eliminate ..
74HC563N ,74HC/HCT563; Octal D-type transparent latch; 3-state; invertingINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC564D ,Octal D-type flip-flop; positive-edge trigger; 3-state; inverting
74HC564N ,Octal D-type flip-flop; positive-edge trigger; 3-state; inverting
74HC564N ,Octal D-type flip-flop; positive-edge trigger; 3-state; invertingapplications. A clock (CP) and an outputenable (OE) input are common to all flip-flops.The 8 flip-flops ..
74HC573BQ ,74HC/HCT573; Octal D-type transparent latch; 3-stateapplications.the high impedance OFF-state.and “373”A latch enable (LE) input and anOperation of the ..
74HC573D ,Octal D-type transparent latch; 3-stateINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..


74ALVCHS162830AGR
1-Bit To 2-Bit Address Driver With 3-State Outputs
Diodes on Inputs Clamp Overshoot Bus Hold on Data Inputs Eliminates theNeed for External Pullup/Pulldown
Resistors
Latch-Up Performance Exceeds 250 mA Per
JESD 17
ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
description/ordering information

This 1-bit to 2-bit address driver is designed for
2.3-V to 3.6-V VCC operation.
Diodes to VCC have been added on the inputs to
clamp overshoot.
Active bus-hold circuitry holds unused or undriven
inputs at a valid logic state. Use of pullup or
pulldown resistors with the bus-hold circuitry is not
recommended.
The outputs, which are designed to sink up to
12 mA, include series damping resistors to reduce
overshoot and undershoot.
The ALVCHS162830A is an improved version of
the LVCHS162830 (non-A version) and has been
optimized for lower power consumption and
higher AC drive. Higher AC drive provides
capability to drive loads with a faster edge rate.
To ensure the high-impedance state during power
up or power down, the output-enable (OE) input
should be tied to VCC through a pullup resistor; the
minimum value of the resistor is determined by the
current-sinking capability of the driver.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2Y1
1Y1
VCC
GND
GND
VCC
GND
OE1
OE2
A10
GND
A11
A12
VCC
A13
A14
GND
A15
A16
GND
A17
A18
VCC
2Y18
1Y18
GND
2Y17
1Y17
1Y4
2Y4
VCC
1Y5
2Y5
GND
1Y6
2Y6
GND
1Y7
2Y7
VCC
1Y8
2Y8
GND
1Y9
2Y9
1Y10
2Y10
GND
1Y11
2Y11
VCC
1Y12
2Y12
GND
1Y13
2Y13
GND
1Y14
2Y14
VCC
1Y15
2Y15
GND
1Y16
2Y16
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED