IC Phoenix
 
Home ›  7710 > 74ALVCH16841-74ALVCH16841DGG,20-bit bus interface D-type latch 3-State
74ALVCH16841-74ALVCH16841DGG Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
74ALVCH16841N/a74avai20-bit bus interface D-type latch 3-State
74ALVCH16841DGGPHIN/a620avai20-bit bus interface D-type latch 3-State


74ALVCH16841DGG ,20-bit bus interface D-type latch 3-StatePIN CONFIGURATION• Wide supply voltage range of 1.2V to 3.6V1OE 1 56 1LE• Complies with JEDEC stand ..
74ALVCH16843DGG ,18-bit bus-interface D-type latch (3-State)
74ALVCH16952DGG ,16-bit registered transceiver (3-State)
74ALVCH245MTC ,Low Voltage Bidirectional Transceiver with Busholdapplications.CCcircuitryThe 74ALVCH245 is fabricated with an advanced CMOS

74ALVCH16841-74ALVCH16841DGG
20-bit bus interface D-type latch 3-State
Product specification
IC24 Data Handbook
1998 Jul 27
Philips Semiconductors Product specification
74ALVCH1684120-bit bus interface D-type latch (3-State)
FEATURES
Wide supply voltage range of 1.2V to 3.6V Complies with JEDEC standard no. 8-1A Wide supply voltage range of 1.2V to 3.6V CMOS low power consumption Direct interface with TTL levels MULTIBYTETM flow-through standard pin-out architecture Low inductance multiple VCC and GND pins for minimum noise
and ground bounce Current drive ±24 mA at 3.0 V All inputs have bus hold circuitry Output drive capability 50Ω transmission lines @ 85°C 3-State non-inverting outputs for bus oriented applications
DESCRIPTION

The 74ALVCH16841 has two 10-bit D-type latch featuring separate
D-type inputs for each latch and 3-State outputs for bus oriented
applications. The two sections of each register are controlled
independently by the latch enable (nLE) and output enable (nOE)
control gates.
When nOE is LOW, the data in the registers appears at the outputs.
When nOE is High the outputs are in High-impedance OFF state.
Operation of the nOE input does not affect the state of the flip-flops.
The 74ALVCH16841 has active bus hold circuitry which is provided
to hold unused or floating data inputs at a valid logic level. This
feature eliminates the need for external pull-up or pull-down
resistors.
PIN CONFIGURATION
QUICK REFERENCE DATA

GND = 0V; Tamb = 25°C; tr = tf ≤ 2.5ns
NOTES:
CPD is used to determine the dynamic power dissipation (PD in μW):
PD = CPD × VCC 2 × fi +  (CL × VCC 2 × fo) where: fi = input frequency in MHz; CL = output load capacitance in pF;
fo = output frequency in MHz; VCC = supply voltage in V;  (CL × VCC 2 × fo) = sum of outputs.
ORDERING INFORMATION
Philips Semiconductors Product specification
74ALVCH1684120-bit bus interface D-type latch (3-State)
PIN DESCRIPTION
FUNCTION TABLE
= High voltage level= Low voltage level= Don’t care= High impedance “off” state
LOGIC SYMBOL
LOGIC SYMBOL (IEEE/IEC)
LOGIC DIAGRAM
Philips Semiconductors Product specification
74ALVCH1684120-bit bus interface D-type latch (3-State)
BUS HOLD CIRCUIT
RECOMMENDED OPERATING CONDITIONS
ABSOLUTE MAXIMUM RATINGS

In accordance with the Absolute Maximum Rating System (IEC 134)
Voltages are referenced to GND (ground = 0V)
NOTE:
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification
74ALVCH1684120-bit bus interface D-type latch (3-State)
DC ELECTRICAL CHARACTERISTICS

Over recommended operating conditions. Voltage are referenced to GND (ground = 0 V).
NOTES:
All typical values are at Tamb = 25°C. Valid for data inputs of bus hold parts.
Philips Semiconductors Product specification
74ALVCH1684120-bit bus interface D-type latch (3-State)
AC CHARACTERISTICS FOR VCC = 2.3V TO 2.7V RANGE

GND = 0V; tr = tf ≤ 2.0ns; CL = 30pF
NOTE:
All typical values are at VCC = 3.3V and Tamb = 25°C.
AC CHARACTERISTICS FOR VCC = 3.0V TO 3.6V RANGE AND VCC = 2.7V

GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF
NOTES:
All typical values are measured Tamb = 25°C. Typical value is measured at VCC = 3.3V
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED