TPS2013DRG4 ,2.6A, 2.7 to 5.5V Single High-Side MOSFET Switch IC, No Fault Reporting, Active-Low Enable 8-SOIC -40 to 85maximum ratings over operating free-air temperature range (unless otherwise noted)Input voltage ran ..
TPS2014P ,0.66A, 4-5.5V Single Hi-Side MOSFET, Fault Report, Act-Low Enable
TPS2020DR ,0.22A, 2.7-5.5V Single Power Distribution Switch IC Hi-Side MOSFET, Fault Report, Act-Low EnableSLVS175C–DECEMBER 1998–REVISED SEPTEMBER 2007DETAILED DESCRIPTIONPOWER SWITCHThe power switch is an ..
TPS2020DRG4 ,0.22A, 2.7-5.5V Single Power Distribution Switch IC Hi-Side MOSFET, Fault Report, Act-Low Enable 8-SOIC -40 to 85FEATURES • UL Listed - File No. E169910• 33-mΩ (5-V Input) High-Side MOSFET SwitchD OR P PACKAGE• S ..
TPS2021D ,0.66A, 2.7-5.5V Single Power Distribution Switch IC Hi-Side MOSFET, Fault Report, Act-Low EnableMAXIMUM RATINGS(1)over operating free-air temperature range (unless otherwise noted)(2)V Input volt ..
TPS2021DR ,0.66A, 2.7-5.5V Single Power Distribution Switch IC Hi-Side MOSFET, Fault Report, Act-Low EnableFEATURES • UL Listed - File No. E169910• 33-mΩ (5-V Input) High-Side MOSFET SwitchD OR P PACKAGE• S ..
TS512AID ,PRECISION DUAL OPERATIONAL AMPLIFIERapplications (active filter, etc).D = Small Outline Package (SO) - also available in Tape & Reel (D ..
TS512AIDT ,PRECISION DUAL OPERATIONAL AMPLIFIERTS512,APRECISION DUAL OPERATIONAL AMPLIFIER ■ LOW INPUT OFFSET VOLTAGE: 500μV max.■ LOW POWER ..
TS512AIN ,PRECISION DUAL OPERATIONAL AMPLIFIERELECTRICAL CHARACTERISTICS V = ±15V, T = 25°C (unless otherwise specified) CC ambSymbol Paramet ..
TS512AIYDT ,Low noise & distortion (8nV/諬z & 0.03%)TS512, TS512APrecision dual operational amplifierDatasheet - production dataDescriptionThe TS512 de ..
TS512ID ,PRECISION DUAL OPERATIONAL AMPLIFIERTS512,APRECISION DUAL OPERATIONAL AMPLIFIER ■ LOW INPUT OFFSET VOLTAGE: 500μV max.■ LOW POWER ..
TS512IDT ,PRECISION DUAL OPERATIONAL AMPLIFIERABSOLUTE MAXIMUM RATINGS Symbol Parameter Value UnitVSupply Voltage ±18 VCCV ±VInput Voltagei ..
TPS2013-TPS2013D-TPS2013DRG4
2.6A, 2.7 to 5.5V Single High-Side MOSFET Switch IC, No Fault Reporting, Active-Low Enable
2 A, TPS2012; 2.6 A, TPS2013 Electrostatic-Discharge Protection, 12-kV
Output, 6-kV All Other Terminals Controlled Rise and Fall Times to Limit
Current Surges and Minimize EMI SOIC-8 Package Pin Compatible With the
Popular Littlefoot Series When GND Is
Connected 2.7-V to 5.5-V Operating Range 10-m A Maximum Standby Current Surface-Mount SOIC-8 and TSSOP-14
Packages –40°C to 125°C Operating Junction
Temperature Range
descriptionThe TPS201x family of power-distribution switches is intended for applications where heavy capacitive loads
and short circuits are likely to be encountered. The high-side switch is a 95-mW N-channel MOSFET. Gate drive
is provided by an internal driver and charge pump designed to control the power switch rise times and fall times
to minimize current surges during switching. The charge pump operates at 100 kHz, requires no external
components, and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit
threshold or a short circuit is present, the TPS201x limits the output current to a safe level by switching into a
constant-current mode. Continuous heavy overloads and short circuits increase power dissipation in the switch
and cause the junction temperature to rise. If the junction temperature reaches approximately 180°C, a thermal
protection circuit shuts the switch off to prevent damage. Recovery from thermal shutdown is automatic once
the device has cooled sufficiently.
The members of the TPS201x family differ only in short-circuit current threshold. The TPS2010 is designed to
limit at 0.4-A load; the other members of the family limit at 1.2 A, 2 A, and 2.6 A (see the available options table).
The TPS201x family is available in 8-pin small-outline integrated circuit (SOIC) and 14-pin thin shink
small-outline (TSSOP) packages and operates over a junction temperature range of –40°C to 125°C. Versions
in the 8-pin SOIC package are drop-in replacements for Siliconix’s Littlefoot power PMOS switches, except
that GND must be connected.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
OUT
OUT
GND
OUT
OUT
OUT
OUT
OUT
OUT
OUT
PW PACKAGE
(TOP VIEW)