TMP175AIDRG4 ,Temperature Sensor with 27 I2C/SMBus Addresses in Industry Standard LM75 Form Factor & Pinout 8-SOIC -40 to 125Electrical Characteristics....... 511.2 Community Resources...... 246.6 Timing Requirements... 611. ..
TMP17FS ,Low Cost, Current Output Temperature TransducerSPECIFICATIONS (V = 15.0 V, 2408C ≤ T ≤ 1058C, unless otherwise noted)S AParameter Symbol Condition ..
TMP17FSZ ,Low Cost, Current Output Temperature Transducerapplications from –40C toTMP17 units are easily interchangeable.+105C where conventional temperat ..
TMP17GS ,Low Cost, Current Output Temperature TransducerSpecifications subject to change without notice.ABSOLUTE MAXIMUM RATINGS* METALIZATION DIAGRAMMaxim ..
TMP1962F10AXBG , 32-Bit RISC Microprocessor
TMP20AIDCKR ,Analog Out Temperature Sensor 5-SC70 -55 to 125Features 3 DescriptionThe TMP20 device is a CMOS, precision analog1• ±2.5°C Accuracy from –55°C to ..
TP8452 , PS/2 2D 3KEY MOUSE CONTROLLER
TP8833AP , MOUSE CONTROLLER
TP8833AP , MOUSE CONTROLLER
TP902C2 ,LOW LOSS SUPER HIGH SPEED RECTIFIER
TP902C2 ,LOW LOSS SUPER HIGH SPEED RECTIFIER
TPA0102 ,1.5-W Stereo Audio Power Amplifierfeatures a shutdown function for power sensitive applications, holding the supply current below 5 m ..
TMP175-TMP175AID-TMP175AIDG4-TMP175AIDGKR-TMP175AIDGKT-TMP175AIDR-TMP175AIDRG4
Digital Temperature Sensor with 2-Wire Interface
Diode
Sensor
Control
Logic
Temperature
SDA 1 7 A0
Temp.
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TMP175, TMP75SBOS288L –JANUARY 2004–REVISED DECEMBER 2015
TMPx75 Temperature Sensor WithI2C and SMBus Interfacein Industry Standard LM75
Form Factor and Pinout Features TMP175:27 Addresses TMP75:8 Addresses, NIST Traceable Digital Output: SMBus™, Two-Wire, andI2C
Interface Compatibility Resolution:9to 12 Bits, User-Selectable Accuracy: ±1°C (Typical) from −40°Cto +125°C ±2°C (Maximum) from −40°Cto +125°C Low Quiescent Current: 50-μA, 0.1-μA Standby Wide Supply Range: 2.7Vto 5.5V Small 8-Pin MSOP and 8-Pin SOIC Packages
Applications Power-Supply Temperature Monitoring Computer Peripheral Thermal Protection Notebook Computers Cell Phones Battery Management Office Machines Thermostat Controls Environmental Monitoring and HVAC Electro Mechanical Device Temperature
TMP175 and TMP75 Internal Block Diagram DescriptionThe TMP75 and TMP175 devices are digital
temperature sensors ideal for negative temperature
coefficient (NTC) and positive temperature coefficient
(PTC) thermistor replacement. The devices offera
typical accuracyof ±1°C without requiring calibration external component signal conditioning. Device
temperature sensors are highly linear and do not
require complex calculations or look-up tables to
derive the temperature. The on-chip 12-bit analog-to-
digital converter (ADC) offers resolutions down to
0.0625°C. The devices are availablein the industry-
standard LM75 SOIC-8 and MSOP-8 footprint.
The TMP175 and TMP75 feature SMBus, two-wire,
andI2C interface compatibility. The TMP175 device
allows upto 27 devices on one bus. The TMP75
allows upto eight on one bus. The TMP175 and
TMP75 both featurean SMBus Alert function.
The TMP175 and TMP75 devices are ideal for
extended temperature measurementina varietyof
communication, computer, consumer, environmental,
industrial, and instrumentation applications.
The TMP175 and TMP75 devices are specified for
operation overa temperature range of −40°C to
+125°C.
The TMP75 production units are 100% tested against
sensors that are NIST traceable and are verified with
equipment that are NIST traceable through ISO/IEC
17025 accredited calibrations.
Device Information(1)(1) Forall available packages, see the orderable addendumat
the endofthe data sheet.
