TLV5628IN ,8-Bit, 10 us Octal DAC, Serial Input, Pgrmable 1x or 2x Output, Low Power TLV5628C, TLV5628I OCTAL 8-BIT DIGITAL-TO-ANALOG CONVERTERS SLAS108A – JANUARY 1995 – REVISED NOVE ..
TLV5629IDW ,8-Bit 8-Ch. 1/3 us DAC, Ser. Input, Pgrmable Settling Time/Power Consump., Low Power, PowerDownELECTRICAL CHARACTERISTICSover recommended operating free-air temperature range, supply voltages, a ..
TLV5629IDWR ,8-Bit 8-Ch. 1/3 us DAC, Ser. Input, Pgrmable Settling Time/Power Consump., Low Power, PowerDownfeatures are a power-down mode, an LDAC input for simultaneous update of all eight DAC outputs,and ..
TLV5629IPW ,8-Bit 8-Ch. 1/3 us DAC, Ser. Input, Pgrmable Settling Time/Power Consump., Low Power, PowerDownmaximum ratings may cause permanent damage to the device. These are stress ratingsonly, and functio ..
TLV5629IPWR ,8-Bit 8-Ch. 1/3 us DAC, Ser. Input, Pgrmable Settling Time/Power Consump., Low Power, PowerDownFEATURES APPLICATIONS• Digital Servo Control Loops2• Eight Voltage Output DACs in One Package• Digi ..
TLV5630IDW ,2.7V to 5.5V 12-Bit 8-Channel Serial DAC W/Int RefBLOCK DIAGRAMREFBand-GapVoltage12/10/8 12/10/812/10/8X2 OUTA1 V or 2 V(Trimmed)DAC ADAC Awith Enabl ..
TN8515B , 10/100 BASE-T SINGLE PORT PULSE TRANSFORMER
TN8515B , 10/100 BASE-T SINGLE PORT PULSE TRANSFORMER
TN8515C , 10/100 BASE-T SINGLE PORT PULSE TRANSFORMER
TN8515C-LF , 10/100 BASE-T SINGLE PORT PULSE TRANSFORMER
TN87C196CB , ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0
TN87C196KB16 , COMMERCIAL/EXPRESS CHMOS MICROCONTROLLER
TLV5628IN
8-Bit, 10 us Octal DAC, Serial Input, Pgrmable 1x or 2x Output, Low Power
Programmable for 1 or 2 Times OutputRange Simultaneous Update Facility Internal Power-On Reset Low Power Consumption Half-Buffered Output
applications Programmable Voltage Sources Digitally Controlled Amplifiers/Attenuators Mobile Communications Automatic Test Equipment Process Monitoring and Control Signal Synthesis
descriptionThe TLV5628C and TLV5628I are octal 8-bit voltage output digital-to-analog converters (DACs) with buffered
reference inputs (high impedance). The DACs produce an output voltage that varies between one or two times
the reference voltages and GND, and the DACs are monotonic. The device is simple to use, running from a
single supply of 3 to 3.6 V. A power-on reset function is incorporated to ensure repeatable start-up conditions.
Digital control of the TLV5628C and TLV5628I is over a simple 3-wire serial bus that is CMOS compatible and
easily interfaced to all popular microprocessor and microcontroller devices. The 12-bit command word
comprises 8 bits of data, 3 DAC select bits and a range bit, the latter allowing selection between the times 1
or times 2 output range. The DAC registers are double buffered, allowing a complete set of new values to be
written to the device, then all DAC outputs are updated simultaneously through control of the LDAC terminal.
The digital inputs feature Schmitt triggers for high noise immunity.
The 16-terminal small-outline D package allows digital control of analog functions in space-critical applications.
The TLV5628C is characterized for operation from 0°C to 70°C. The TLV5628I is characterized for operation
from –40°C to 85°C. The TLV5628C and TLV5628I do not require external trimming.
AVAILABLE OPTIONSPlease be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
DATA
CLK
VDD
DACE
DACF
LDAC
LOAD
REF2
DACH
DACG
