IC Phoenix
 
Home ›  TT19 > TCM1050-TCM1050D-TCM1050DR,Dual Transient-Voltage Suppressor
TCM1050-TCM1050D-TCM1050DR Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
TCM1050TIN/a1200avaiDual Transient-Voltage Suppressor
TCM1050DTEXAS ?N/a113avaiDual Transient-Voltage Suppressor
TCM1050DRTIN/a1193avaiDual Transient-Voltage Suppressor


TCM1050 ,Dual Transient-Voltage Suppressormaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
TCM1050D ,Dual Transient-Voltage Suppressormaximum ratings over operating free-air temperature range (unless otherwise noted)TCM1030 nonrepeti ..
TCM1050DR ,Dual Transient-Voltage Suppressor TCM1030, TCM1050 DUAL TRANSIENT-VOLTAGE SUPPRESSORS SCTS040B – JUNE 1989 – REVISED JUNE 1997* Meet ..
TCM129C13ADW ,COMBINED SINGLE-CHIP PCM CODEC AND FILTER
TCM129C13ADW ,COMBINED SINGLE-CHIP PCM CODEC AND FILTER
TCM129C13N ,COMBINED SINGLE-CHIP PCM CODEC AND FILTER
TDA8772H/8 ,Triple 8-bit video digital-to-analog converter
TDA8775G ,Triple 10-bit video Digital-to-Analog Converter DAC
TDA8775G ,Triple 10-bit video Digital-to-Analog Converter DAC
TDA8775G ,Triple 10-bit video Digital-to-Analog Converter DAC
TDA8776AK ,10-bit, 1000 Msps Digital-to-Analog Converter DAC
TDA8776AK ,10-bit, 1000 Msps Digital-to-Analog Converter DAC


TCM1050-TCM1050D-TCM1050DR
Dual Transient-Voltage Suppressor
Firing Voltage Range...–5 V to –85 V Positive Surge Current (see Note 1):
TCM1030 TCM1050
10/1000 16 A 30 A
10/160 25 A 45 A
2/10 35 A 50 A
Negative Surge Current (see Note 1):
TCM1030 TCM1050
10/1000 –16 A –25 A
10/160 –25 A –29 A
2/10 –35 A –36 A
High Holding Current
– TCM1030... 100 mA Min
– TCM1050... 150 mA Min


description

The TCM1030 and TCM1050 dual transient-voltage suppressors are designed specifically for telephone line
card protection against lightning and transients (voltage transients) induced by ac lines. One of the TIP terminals
(pin 1 or 8) and one of the RING terminals (pin 4 or 5) are connected to the tip and ring circuits of a SLIC
(subscriber-line interface circuit). The battery feed connections between the SLIC and the subscriber line are
from the remaining TIP (pin 1 or 8) and RING (pin 4 or 5) through the TCM1030 or the TCM1050 to the tip and
ring lines. Transients are suppressed between tip and ground, and ring and ground.
Positive transients are clamped by diodes D1 and D2. Negative transients that are more negative than VS cause
the SCRs, Q1 and Q2, to crowbar. The high holding current of the SCRs prevent dc latchup as the transient
subsides.
The TCM1030 and TCM1050 are characterized for operation from –40°C to 85°C.
NOTE 1: The notation 10/1000 refers to a waveshape having tr = 10 μs and tw = 1000 μs ending at 50% of the peak value. The notation 10/160
is tr = 10 μs and tw = 160 μs. The notation 2/10 is tr = 2 μs and tw = 10 μs.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
RING
GND
RING
NC – No internal connection
The D package is available taped and
reeled. Add R suffix (i.e., TCM1030DR).
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED