TB2906HQ ,Maximum Power 43 W BTL x 4-ch Audio Power ICFeatures • High power output : P MAX (1) = 43 W (typ.) OUT P (V = 14.4 V, f = 1 kHz, JEITA max, R = ..
TB2932HQ , Maximum Power 49 W BTL × 4-ch Audio Power IC
TB2938HQ ,Audio power amplifierFeatures High output power, low distortion, and low noise property (for details, refer to the Tab ..
TB3100H ,On Technology Corporation - SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE
TB3100H-13 , 100A BI-DIRECTIONAL SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE
TB3100L-13 , 30A BI-DIRECTIONAL SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE
TC74HC283 , TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TC74HC299AP , 8-Bit PIPO Shift Register with Asynchronous Clear
TC74HC299AP , 8-Bit PIPO Shift Register with Asynchronous Clear
TC74HC366AP , HEX BUS BUFFER
TC74HC367AFN , HEX BUS BUFFER
TC74HC367AFN , HEX BUS BUFFER
TB2906HQ
Maximum Power 43 W BTL x 4-ch Audio Power IC
TB2906HQ TOSHIBA Bi-CMOS Digital Integrated Circuit Silicon Monolithic
TB2906HQ Maximum Power 43 W BTL × 4-ch Audio Power IC
The TB2906HQ is 4-ch BTL audio amplifier for car audio
applications.
This IC can generate higher power: POUT MAX = 43 W as it
includes the pure complementary P-ch and N-ch DMOS output
stage.
It is designed to yield low distortion ratio for 4-ch BTL audio
power amplifier, built-in standby function, muting function, and
various kinds of protectors.
Additionally, Off-set detector is built in.
Features High power output
: POUT MAX (1) = 43 W (typ.)
P (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω)
: POUT MAX (2) = 39 W (typ.)
(VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 Ω)
: POUT (1) = 26 W (typ.)
(VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
: POUT (2) = 23 W (typ.)
(VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω) Low distortion ratio: THD = 0.015% (typ.)
(VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω) Low noise: VNO = 180 µVrms (typ.)
(VCC = 13.2 V, Rg = 0 Ω, BW = 20 Hz to 20 kHz, RL = 4 Ω) Built-in standby switch function (pin 4) Built-in muting function (pin 22) Built-in Off-set detection function (pin 25) Built-in various protection circuits:
Thermal shut down, overvoltage, out to GND, out to VCC, out to out short Operating supply voltage: VCC (opr) = 9 to 18 V (RL = 4 Ω)
Note 1: Since this device’s pins have a low withstanding voltage, please handle it with care.
Note 2: Install the product correctly. Otherwise, it may result in break down, damage and/or degradation to the
product or equipment.
Note 3: These protection functions are intended to avoid some output short circuits or other abnormal conditions
temporarily. These protect functions do not warrant to prevent the IC from being damaged.
In case of the product would be operated with exceeded guaranteed operating ranges, these protection
features may not operate and some output short circuits may result in the IC being damaged.
Weight: 7.7 g (typ.)
