TA8225H ,45W BTL Audio AmplifierFeatures High power : P = 45W (typ.) OUT (1)(V = 14.4V, f = 1kHz, THD = 10%, R = 2Ω) CC L: P = 4 ..
TA8225HQ , 45W BTL Audio Amplifier
TA8225L ,45W BTL Audio AmplifierTA8225H/L TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8225H,TA8225L 45W BTL A ..
TA8225LQ , 45W BTL Audio Amplifier
TA8227 ,LOW FREQUENCY POWER AMPLIFIERTA8227PTAR777P"W9ItPM-M-LOW FREQUENCY POWER AMPLIFIERTA8227P is an audio power IC with built-in two ..
TA8227P ,Low Frequency Power AmplifierTA8227P TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8227P Low Frequency Power ..
TC55VZM216AJJN12 ,262,144-WORD BY 16-BIT CMOS STATIC RAM
TC55W1600FT55 ,1,048,576-WORD BY 16-BIT/2,097,152-WORD BY 8-BIT FULL CMOS STATIC RAM
TC55W1600FT-55 ,1,048,576-WORD BY 16-BIT/2,097,152-WORD BY 8-BIT FULL CMOS STATIC RAM
TC55W1600FT-70 ,1,048,576-WORD BY 16-BIT/2,097,152-WORD BY 8-BIT FULL CMOS STATIC RAM
TC55W800FT-70 ,524,288-WORD BY 16-BIT/1,048,576-WORD BY 8-BIT FULL CMOS STATIC RAMfeatures using CE1 and CE2 Data retention supply voltage of 1.5 to 3.3 V Access Time 55 ns 70 ns ..
TC55WD818FF-150 ,524,288-WORD BY 18-BIT SYNCHRONOUS NO-TURNAROUND STATIC RAM
TA8225H-TA8225L
45W BTL Audio Amplifier
TA8225H/L TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8225H,TA8225L 45W BTL Audio Amplifier
The TA8225H, TA8225L is BTL audio power amplifier for
consumer application.
It is designed for high power, low distortion and low noise.
It contains various kind of protectors and the function of
stand−by SW.
In addition, the functions of output short or over voltage
detection and junction temperature are involved.
Features High power
: POUT (1) = 45W (typ.)
(VCC = 14.4V, f = 1kHz, THD = 10%, RL = 2Ω)
: POUT (2) = 40W (typ.)
(VCC = 13.2V, f = 1kHz, THD = 10%, RL = 2Ω)
: POUT (3) = 24W (typ.)
(VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω) Low thermal resistance
: θj−c = 1.5°C / W (infinite heat sink) Excellent output power band width
: POUT (4) = 18W (typ.)
(VCC = 13.2V, f = 50Hz~20kHz, THD = 1%, RL = 4Ω) Low distortion ratio
: THD = 0.015% (typ.)
(VCC = 13.2V, f = 1kHz, POUT = 4W, RL = 4Ω) Built−in stand−by function (with pin(1) set at high, power is turned on) Built−in output short or over voltage detection circuit, output to VCC and output to GND short.
(Pin(8): Open collector) Built−in junction temperature detection circuit. (Pin(2): Open collector) Built−in various protection circuits Thermal shut down, Over voltage Output to GND short Output to VCC short Output to Output short Operating supply voltage: VCC (opr) = 9~18V
Weight
HZIP17−P−2.00: 9.8g (typ.)
HSIP17−P−2.00: 9.8g (typ.)
