ST ,SuperTan庐 Wet Tantalum Capacitors with Hermetic Seal, FEATURES: Very High Capacitance, 10 to 1800碌F, 25 to 125VDC, -55掳C to + 125掳C, Very Low ESR and High Ripple Current , contact wettants Document Number: 430002 Revision 17-Oct-02ST®SuperTan Wet Tantalum Capacitors w ..
ST02-33G1 , Power zener Diode
ST02D-170 , Trankiller
ST02D-200 , Trankiller
ST03-240F1 , Power zener Diode
ST03-240F1 , Power zener Diode
STK4221II ,AF Power Amplifier (Split Power Supply) (80W + 80W min, THD = 0.4%)Features Package Dimensionsunit: mm• Built-in muting circuit to cut off various kinds of popnoise40 ..
STK4221II ,AF Power Amplifier (Split Power Supply) (80W + 80W min, THD = 0.4%) Ordering number: EN4611AThick Film Hy ..
STK4231 ,AF Power Amplifier(Split Power Supply)(100W+100W min, THD=0.08%)Features Package Dimensions• Muting circuit built-in to isolate all types of shock noise unit: mm• ..
STK4231II ,2ch AF Power AmplifierOrderinug number: EN 2307Thick Film Hybrid IC.STK423III2-Channel 100W min AF' Power Amp(Dual Suppli ..
STK4231V ,AF Power AmplifierFeatures Package Dimensions• Muting circuit built-in to isolate all types of shock noise unit: mm• ..
STK4241II ,2ch AF Power AmplifierFeatures. Muting circuit built-in to isolate all types of shock noise. Current mirror circuit for l ..
ST
SuperTan庐 Wet Tantalum Capacitors with Hermetic Seal, FEATURES: Very High Capacitance, 10 to 1800碌F, 25 to 125VDC, -55掳C to + 125掳C, Very Low ESR and High Ripple Current
Vishay
SuperTan® Wet T antalum Capacitors
with Hermetic Seal
FEATURES Very High Capacitance 10 to 1800µF 25 to 125VDC
•- 55°C to + 125°C Very Low ESR High Ripple Current All Tantalum Case Hermetically Sealed Low DCL
Vishay ST represents a major breakthrough in wet tantalum
capacitor technology. Its unique cathode system pro-
vides the highest capacitance per unit volume. The design
facilitates a doubling of capacitance, lower ESR and higher
ripple current rating compared with conventional wet tanta-
lum products. Moreover, the ST has the capacitance stabil-
ity of a solid tantalum capacitor and there are no circuit im-
pedance restrictions.
The ST is housed in an all tantalum, hermetically sealed case
and is manufactured to withstand hazardous environments.
The ST is used widely in the defense and aerospace indus-
tries and whenever there is a space problem.
Application Notes No continuous reverse voltage permissable. Transient reverse voltage surges are acceptable under
the following conditions:
The peak reverse voltage does not exceed 1.5V and the
peak current times the duration of the reverse transient
does not exceed 0.05 ampere seconds. In addition, the
repitition frequency of the reverse voltage surge is less
than 10Hz. The peak of the applied AC ripple and the applied DC
voltage must not exceed the DC voltage rating of the
capacitor. Ripple current ratings by part number at 85°C and 40kHz
are included in the table. Ripple current correction
factors for other temperatures and frequencies are given
on the next page.
Approx. Weight T1: 2.3 grams, T2: 5.7 grams
T3: 9.4 grams T4: 14.8 grams
NOTES:1. Material at egress is tantalum
2. Insulation sleeving will lap over the ends of the capacitor case.
3. Tinned nickel leads, solderable and weldable
TERMINAL LOCATION
WITHIN 0.031 OF
CENTER
TERMINAL WELDED TO CASE
DIMENSIONS in inches (millimeters)
