SN74ALVTH16827DLR ,2.5-V/3.3-V 20-Bit Buffers/Drivers With 3-State Outputsmaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
SN74ALVTH16827GR ,2.5-V/3.3-V 20-Bit Buffers/Drivers With 3-State Outputsmaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage ra ..
SN74ALVTH32374KR , 2.5-V/3.3-V 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTSSN54ALVTH32374, SN74ALVTH32374 2.5-V/3.3-V 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPSWITH 3-STATE OUTP ..
SN74ALVTHR16245DL ,2.5-V/3.3-V 16-Bit Bus Transceiver With 3-State OutputsSN54ALVTHR16245, SN74ALVTHR16245 2.5-V/3.3-V 16-BIT BUS TRANSCEIVERSWITH 3-STATE OUTPUTSSCES075D – ..
SN74ALVTHR16245GR ,2.5-V/3.3-V 16-Bit Bus Transceiver With 3-State Outputsmaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage ra ..
SN74ALVTHR16245GR ,2.5-V/3.3-V 16-Bit Bus Transceiver With 3-State Outputs/sc/package.Please be aware that an important notice concerning availability, standard warranty, an ..
SN74LVC2G157DCUR ,Single 2-Line to 1-Line Data Selector/MultiplexerSample & Support & ReferenceProduct Tools &TechnicalCommunityBuy DesignFolder Documents SoftwareSN7 ..
SN74LVC2G157DCUT ,Single 2-Line to 1-Line Data Selector/MultiplexerFeatures 3 DescriptionThis single 2-line to 1-line data selector multiplexer is1• Available in the ..
SN74LVC2G157DCUT ,Single 2-Line to 1-Line Data Selector/MultiplexerFeatures... 18.3 Feature Description...... 82 Applications..... 18.4 Device Functional Modes...... ..
SN74LVC2G157YEAR , SINGL 2LINE TO 1LINE DATA SELECTOR/MULTIPLEXER
SN74LVC2G157YEAR , SINGL 2LINE TO 1LINE DATA SELECTOR/MULTIPLEXER
SN74LVC2G157YEPR , SINGL 2LINE TO 1LINE DATA SELECTOR/MULTIPLEXER
SN74ALVTH16827-SN74ALVTH16827DLR-SN74ALVTH16827GR
2.5-V/3.3-V 20-Bit Buffers/Drivers With 3-State Outputs
Input and Output Voltages With 2.3-V to
3.6-V VCC) Typical VOLP (Output Ground Bounce)
< 0.8 V at VCC = 3.3 V, TA = 25°C High Drive (–24/24 mA at 2.5-V and
–32/64 mA at 3.3-V VCC) Power Off Disables Outputs, Permitting
Live Insertion High-Impedance State During Power Up
and Power Down Prevents Driver Conflict Uses Bus Hold on Data Inputs in Place of
External Pullup/Pulldown Resistors to
Prevent the Bus From Floating Auto3-State Eliminates Bus Current
Loading When Output Exceeds VCC + 0.5 V Latch-Up Performance Exceeds 250 mA Per
JESD 17 ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model; and Exceeds 1000 V
Using Charged-Device Model, Robotic
Method Flow-Through Architecture Facilitates
Printed Circuit Board Layout Distributed VCC and GND Pin Configuration
Minimizes High-Speed Switching Noise Package Options Include Plastic Shrink
Small-Outline (DL), Thin Shrink
Small-Outline (DGG), Thin Very
Small-Outline (DGV) Packages, and 380-mil
Fine-Pitch Ceramic Flat (WD) Package
descriptionThe ’ALVTH16827 devices are 20-bit buffers/line drivers designed for 2.5-V or 3.3-V VCC operation, but with
the capability to provide a TTL interface to a 5-V system environment.
The devices are composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer
section, the two output-enable (1OE1 and 1OE2, or 2OE1 and 2OE2) inputs must be low for the corresponding
Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the
high-impedance state.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1Y2
GND
1Y3
1Y4
VCC
1Y5
1Y6
1Y7
GND
1Y8
1Y9
1Y10
2Y1
2Y2
2Y3
GND
2Y4
2Y5
2Y6CC
2Y7
2Y8
GND
2Y9
2Y10
2OE1
1A2
GND
1A3
1A4
VCC
1A5
1A6
1A7
GND
1A8
1A9
1A10
2A1
2A2
2A3
GND
2A4
2A5
2A6CC
2A7
2A8
GND
2A9
2A10
2OE2
