SN74AHCT16374DGGR ,16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs SN54AHCT16374, SN74AHCT16374 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPSWITH 3-STATE OUTPUTSSCLS337I – ..
SN74AHCT16541 ,16-Bit Buffers/Drivers With 3-State Outputs SN54AHCT16541, SN74AHCT16541 16-BIT BUFFERS/DRIVERSWITH 3-STATE OUTPUTSSCLS339H – MARCH 1996 – REV ..
SN74AHCT16541DGGR ,16-Bit Buffers/Drivers With 3-State Outputsmaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage ra ..
SN74AHCT16541DL ,16-Bit Buffers/Drivers With 3-State Outputsmaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
SN74AHCT16541DL ,16-Bit Buffers/Drivers With 3-State Outputslogic diagram (positive logic)1 241OE12OE148 251OE2 2OE247 2 36 131A1 1Y1 2Y12A1To Seven Other Chan ..
SN74AHCT174N ,Hex D-Type Flip-Flops With Clearmaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
SN74LS90N ,DECADE COUNTER; DIVIDE-BY-TWELVE COUNTER; 4-BIT BINARY COUNTERSN54/74LS90SN54/74LS92DECADE COUNTER;SN54/74LS93DIVIDE-BY-TWELVE COUNTER;4-BIT BINARY COUNTERDECADE ..
SN74LS91N ,8-BIT SHIFT REGISTERS
SN74LS92D ,DECADE COUNTER; DIVIDE-BY-TWELVE COUNTER; 4-BIT BINARY COUNTER
SN74LS92D ,DECADE COUNTER; DIVIDE-BY-TWELVE COUNTER; 4-BIT BINARY COUNTERLOGIC DIAGRAM CONNECTION DIAGRAMDIP (TOP VIEW)LS931 14CP CP1 0J Q J Q J Q J Q2 13NC14 MR1CP0 CP CP ..
SN74LS92N ,DECADE COUNTER; DIVIDE-BY-TWELVE COUNTER; 4-BIT BINARY COUNTERSN54/74LS90SN54/74LS92DECADE COUNTER;SN54/74LS93DIVIDE-BY-TWELVE COUNTER;4-BIT BINARY COUNTERDECADE ..
SN74LS92NSR ,Divide-By-Twelve Decade Counter
SN74AHCT16374DGGR
16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 48-TSSOP -40 to 85
Distributed VCC and GND Pins MinimizeHigh-Speed Switching Noise Flow-Through Architecture Optimizes PCB
Layout Latch-Up Performance Exceeds 250 mA Per
JESD 17 ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0) Package Options Include Plastic Shrink
Small-Outline (DL), Thin Shrink
Small-Outline (DGG), and Thin Very
Small-Outline (DGV) Packages and 380-mil
Fine-Pitch Ceramic Flat (WD) Package
Using 25-mil Center-to-Center Spacings
descriptionThe ’AHCT16374 devices are 16-bit
edge-triggered D-type flip-flops with 3-state
outputs designed specifically for driving highly
capacitive or relatively low-impedance loads.
They are particularly suitable for implementing
buffer registers, I/O ports, bidirectional bus
drivers, and working registers.
These devices can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock
(CLK) input, the Q outputs of the flip-flop take on the logic levels at the data (D) inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high
or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive
the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus
lines without need for interface or pullup components.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
OE does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while
the outputs are in the high-impedance state.
The SN54AHCT16374 is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74AHCT16374 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1Q2
GND
1Q3
1Q4
VCC
1Q5
1Q6
GND
1Q7
1Q8
2Q1
2Q2
GND
2Q3
2Q4
VCC
2Q5
2Q6
GND
2Q7
2Q8
2OE
1D2
GND
1D3
1D4
VCC
1D5
1D6
GND
1D7
1D8
2D1
2D2
GND
2D3
2D4
VCC
2D5
2D6
GND
2D7
2D8
2CLK
