SN74LS367AN.. ,3-state hex buffer3-State Outputs Drive Bus Lines or BufferMemory Address RegistersChoice of True or lnverting Output ..
SN74LS367ANSR ,Hex Bus Drivers With 3-State Outputslogic diagrams (positive logic)'365A. 'Ls365A '366A. 'Ls366A '367A, 'LS367A '368A, 'LS368AG1 (1) G1 ..
SN74LS367N ,3-STATE HEX BUFFERSSN54/74LS365ASN54/74LS366ASN54/74LS367A3-STATE HEX BUFFERSSN54/74LS368AThese devices are high speed ..
SN74LS368A ,6-bit buffers and line drivers3-State Outputs Drive Bus Lines or BufferMemory Address RegistersChoice of True or lnverting Output ..
SN74LS368AD ,3-state hex buffer3-State Outputs Drive Bus Lines or BufferMemory Address RegistersChoice of True or lnverting Output ..
SN74LS368ADR2 ,3-State Hex Buffersmaximum ratings.Designers should ensure that Output Enable signals to 3-state deviceswhose outputs ..
SP12 ,TYRE PRESSURE SENSOR WITH ACCELEROMETERapplications. The SP12 is supplied in a 14 pin SOP (Small Outline Package) plastic package.The sens ..
SP12-T ,TYRE PRESSURE SENSOR FOR HEAVY VEHICLESapplications, offering the system designer the flexibility to determine sequences and functionality ..
SP1481ECN , ±15kV Enhanced Low Power Half-Duplex RS-485 Transceivers
SP1481ECP , ±15kV Enhanced Low Power Half-Duplex RS-485 Transceivers
SP1485EMN , Enhanced Low Power Half-Duplex RS-485 Transceivers
SP1485EMN , Enhanced Low Power Half-Duplex RS-485 Transceivers
SN54LS365AJ-SN54LS366AJ-SN54LS368AJ-SN74LS365AN-SN74LS366AN-SN74LS367AD-SN74LS367AN-SN74LS368AN
3-state hex buffer
3-STATE HEX BUFFERSThese devices are high speed hex buffers with 3-state outputs. They are
organized as single 6-bit or 2-bit/4-bit, with inverting or non-inverting data (D)
paths. The outputs are designed to drive 15 TTL Unit Loads or 60 Low Power
Schottky loads when the Enable (E) is LOW.
When the Output Enable (E) is HIGH, the outputs are forced to a high
impedance “off” state. If the outputs of the 3-state devices are tied together,
all but one device must be in the high impedance state to avoid high currents
that would exceed the maximum ratings. Designers should ensure that Output
Enable signals to 3-state devices whose outputs are tied together are
designed so there is no overlap.
GUARANTEED OPERATING RANGES
