PVI5033R ,2 Form A Photo Voltaic Isolator in a 8-pin DIP Packageapplicationsrequiring high-current and/or high voltage switchingwith optical isolation between the ..
PVI5033R ,2 Form A Photo Voltaic Isolator in a 8-pin DIP PackageFeatures! Monolithic constructionThe PVI5033R Photovoltaic Isolator is a dual-channel, opto-isolate ..
PVI5033RS ,2 Form A Photo Voltaic Isolator in a 8-pin SMT PackageElectrical Specifications (-40°C ≤ T ≤ +85°C unless otherwise specified)AINPUT CHARACTERISTICS Limi ..
PVI5050 ,1 Form A Photo Voltaic Isolator in a mod. 8-pin DIP PackageData Sheet No. PD 10029-GReplaced by PVI-NSeries PVIPhotovoltaic Isolator5-10 Volt Output
PVI5050NPBF ,1 Form A Photo Voltaic Isolator in a mod. 8-pin DIP Packageapplications requiring high-current and/or high-voltage switching with optical isolation between th ..
PVI5050NSPBF ,1 Form A Photo Voltaic Isolator in a mod. 8-pin SMT PackageApplications Part Identiication Load DistributionPVI1050NPbF Industrial Controlsthru-hole PVI50 ..
R3111D161A , LOW VOLTAGE DETECTOR
R3111D251A , LOW VOLTAGE DETECTOR
R3111H271C-T1 , LOW VOLTAGE DETECTOR
R3111H451A-T1 , LOW VOLTAGE DETECTOR
R3111H601A , POWER MANAGEMENT ICs MARK INFORMATIONS R3111H SERIES MARK SPECIFICATION
R3111N201C , LOW VOLTAGE DETECTOR
PVI5033R-PVI5033RS
2 Form A Photo Voltaic Isolator in a 8-pin DIP Package
International
19R Rectifier
Data Sheet No. PD10048-F
Series PVI5033R
Photovoltaic Isolator
Solid-State
Opto-lsolated MOSFET Gate Driver
Dual-Channel, 5V, 5yA
General Description
The PVI5033R Photovoltaic Isolator is a dual-
channel, opto-isolated driver capable of directly driving
gates of power MOSFETs or IGBTs. It utilizes a
monolithic integrated circuit photovoltaic generator of
novel construction as its output. The output is controlled
by radiation from a GaAIAs light emitting diode (LED)
which is optically isolated from the photovoltaic
generator.
The PVI5033R is ideally suited for applications
requiring high-current and/or high voltage switching
with optical isolation between the low-level driving
circuitry and high-energy or high- voltage load circuits.
It can be used for directly driving gates of power
MOSFETs. The dual- channel conhguration allows its
outputs to drive independent discrete power
MOSFETs, or be connected in parallel or in series to
provide higher-current drive for power MOSFETs or
higher-voltage drive for IGBTs. PVI5033R employs a
fast turn-off circuitry.
PVI5033R Photovoltaic Isolators are packaged in
an 8-pin, molded DIP package with either thru-hole or
"gull-wing" terminals. It is available in standard plastic
shipping tubes or on tape-and-reel. Refer to Part
Identification information.
Applications
- Telecommunications
- Load Distribution
- IndustriaIControls
- Instrumentation and Measurement
- Electronic Ballast
Features
. Monolithic construction
. 3,750 VRMS l/O isolation
. 1,200 Va, output-to-output isolation
. Dual-Channel application flexibility
. Solid-State Reliability
. UL Recognized and BABT Certified
Part Identification
PVI5033R thru-hole
PVI5033RS SMT
PVI5033RS-T SMT, Tape and Reel
International
PVl5033R
TOR Rectifier
Electrical Specifications (-40°C f TA S +85°C unless otherwise specified)
INPUT CHARACTERISTICS Limits Units
Min. Input Current (See Fig.1) 5.0 mA
Input Current Range (See Fig. 1) 3.0 to 25 mA
Max. Continuous Input Current @ TA=+25°C 40 mA
LED Forward Voltage Drop @ 5mA, TA=+25°C (See Fig. 3) 1.4 V
Max. Reverse Voltage 7.0 V
Max. Reverse Current @ -7VDc, TA=+25°C 10 PA
OUTPUT CHARACTERISTICS Limits Units
Min. Forward Voltage 8.0 Voc
Max. Reverse Current 10 “ADC
COUPLED CHARACTERISTICS Limits Units
Min. Output Voltage @ ILED = 10mA, RL = 10MQ 5 V
@ TA=0''C to +70°C (See Fig. 1 & 2)
Max. Output Voltage @ ILED = 10mA, RL = 10MQ 10 V
© TA=0°C to +70°C (See Fig. 1 & 2)
Max. Voltage Differential Between Outputs 1.0 V
@ ILED = 5mA, RL = 10W2
Min. Output Short-Circuit Current 1.65 pA
@ ILED = 5mA, @ TA=+25°C (See Fig. 1 & 2)
Typical Output Short-Circuit Current 5 pA
@ ILED = 10mA, @ TA=+25°C (See Fig. 1 & 2)
Max. Turn-On Time @ ILED = 5mA, CLOAD = 200pF (See Fig. 4) 2.5 ms
Max. Turn-Off Time @ ILED = 5mA, CLOAD = 200pF (See Fig. 4) .5 ms
Off-State Clamping Resistance: minimum 350 n
maximum 1500 n
GENERAL CHARACTERISTICS Limits Units
Min. Dielectric Strength, Input-Output 3750 VRMs
Min. Dielectric Strength, Output-to-Output 1200 Voc
Min. Insulation Resistance, Input-to-Output 1012 Q
@TA=+25''C, 50%RH, 100VDC
Max. Capacitance, Input-Output 5.0 pF
Max. Pin Soldering Temperature (10 seconds max.) +260 ''C
Ambient Temperature Range: Operating -40 to +85 "C
Storage -40 to +125 ''C
Connection Diagram
International Rectirter does not recommend the use of this
product in aerospace, avionics, military or life support
applications. Users of this International Rectifier product in
such applications assume all risks of such use and in-
demnify International Rectifier against all damages re-
sulting from such use.
