PVI5013RS-T ,2 Form A Photo Voltaic Isolator in a 8-pin SMT Packageapplications requiring high-current and/or high voltage switching with optical isolation between th ..
PVI5013RS-T ,2 Form A Photo Voltaic Isolator in a 8-pin SMT PackageFeaturesThe PVI5013R Photovoltaic Isolator is a dual-channel, Monolithic constructionopto-isolat ..
PVI5013RS-TPBF ,2 Form A Photo Voltaic Isolator in a 8-pin SMT PackageApplicationsPart Identiication TelecommunicationsPVI5013RPbF thru-hole Load DistributionPVI501 ..
PVI5033R ,2 Form A Photo Voltaic Isolator in a 8-pin DIP Packageapplicationsrequiring high-current and/or high voltage switchingwith optical isolation between the ..
PVI5033R ,2 Form A Photo Voltaic Isolator in a 8-pin DIP PackageFeatures! Monolithic constructionThe PVI5033R Photovoltaic Isolator is a dual-channel, opto-isolate ..
PVI5033RS ,2 Form A Photo Voltaic Isolator in a 8-pin SMT PackageElectrical Specifications (-40°C ≤ T ≤ +85°C unless otherwise specified)AINPUT CHARACTERISTICS Limi ..
R3111D161A , LOW VOLTAGE DETECTOR
R3111D251A , LOW VOLTAGE DETECTOR
R3111H271C-T1 , LOW VOLTAGE DETECTOR
R3111H451A-T1 , LOW VOLTAGE DETECTOR
R3111H601A , POWER MANAGEMENT ICs MARK INFORMATIONS R3111H SERIES MARK SPECIFICATION
R3111N201C , LOW VOLTAGE DETECTOR
PVI5013R-PVI5013RS-PVI5013RS-T
2 Form A Photo Voltaic Isolator in a 8-pin DIP Package
Data Sheet No. PD10041 revJ
International
TGiR Rectifier Series PVI5013RPbF
Photovoltaic Isolator
Solid-State
Opto-lsolated MOSFET Gate Driver
Dual-Channel, 5V, 1.0pA
General Description Features
The PVI5013R Photovoltaic Isolator is a dual-channel,
opto-isolated driver capable of directly driving gates I Monolithic construction
of power MOSFETs or IGBTs. It utilizes a monolithic ' 3,750 VRMS l/O Isolation . .
integrated circuit photovoltaic generator of novel ' 1200 VDC output-to-output isolation
construction as its output. The output is controlled by . Dual-Channel application flexibility
radiation from a GaAIAs light emitting diode (LED) - Solid-State reliability
which is optically isolated from the photovoltaic . UL recognized and BABT Certified
generator.
The PVI5013R is ideally suited for applications
requiring high-current and/or high voltage switching
with optical isolation between the low-level driving
circuitry and high-energy or high- voltage load
circuits. It can be used for directly driving gates of
power MOSFETs. The dual- channel configuration
allows its outputs to drive independent discrete power
MOSFETs, or be connected in parallel or in series to
provide higher-current drive for power MOSFETs or
higher-voltage drive for IGBTs. PVI5013R employs a
fast turn-off circuitry.
PVI5013R Photovoltaic Isolators are packaged in an
8-pin, molded DIP package with either thru-hole or
surface-mount (gull-wing) terminals. It is available in
standard plastic shipping tubes or on tape-and-reel.
Please referto Part Identification information opposite.
Applications . . Part Identification
' Pr1n.Tenirtions PVl5013RPbF thru-hole
' Load Distribution PVI5013RSPbF surface-mount
' Industrial Controls PVI5013RS-TPbF surface-mount,
- Instrumentation and Measurement Tape and Reel
International
TOR 'uct/ie,
Series PVl5013RPbF
Electrical Specifications (-40°C 3 T, 3 +85°C unless otherwise specified)
INPUT CHARACTERISTICS Limits Units
Minimum Input Current (see fgure 1) 5.0 mA
Input Current Range (see figure 1) 3.0 to 25 mA
Maximum Continuous Input Current @ TA=+25°C 40 mA
LED Forward Voltage Drop ti) 5mA, TA=+25°C (see fgure 3) 1.4 V
Maximum Reverse Voltage 6.0 V
Maximum Reverse Current Iii) -6VDc, TA=+25°C 10 pA
OUTPUT CHARACTERISTICS Limits Units
Minimum Forward Voltage 8.0 VDC
Maximum Reverse Current 10 quc
COUPLED CHARACTERISTICS Limits Units
Minimum Output Voltage @ ILED = 5mA, RL = 10MQ 3 V
Iii) TA=0°C to +70°C (see figures 1 and 2)
Maximum Output Voltage @ ILED = 5mA, RL = 10M) 8 V
ti) TA=0°C to +70°C (see figures 1 and 2)
Maximum Voltage Differential Between Outputs 1.0 V
@ ILED = 5mA, RL = 10MQ
Typical Output Short-Circuit Current 1.0 pA
@ ILED = 5mA, @ TA=+25°C (see figures 1 and 2)
Maximum Turn-On Time @ ILED = 5mA, CLOAD = 200pF (see figure 4) 5 ms
Max. Turn-Off Time @ ILED = 5mA, CLOAD = 200pF (see figure 4) 0.25 ms
Off-State Clamping Resistance: minimum 100 Q
maximum 3300 Q
GENERAL CHARACTERISTICS Limits Units
Minimum Dielectric Strength, Input-Output 3750 VRMS
Minimum Dielectric Strength, Output-to-Output 1200 VDC
Minimum Insulation Resistance, Input-to-Output 1012 Q
@TA=+25°C, 50%RH, 100VDC
Maximum Capacitance, Input-Output 5.0 qpF
Maximum Pin Soldering Temperature (10 seconds maximum) +260 °C
Ambient Temperature Range: Operating -40 to +85 °C
Storage -40 to +100 °C
Connection Diagram
International Rectifier does not recommend the use of this
product in aerospace, avionics, military or life support ap-
plications. Users of this International Rectifier product in
such applications assume all risks of such use and indemnify
International Rectfer against all damages resulting from
such use.