PUMD16 ,NPN/PNP resistor-equipped transistorsapplications• Control of IC inputs.DESCRIPTIONNPN/PNP resistor-equipped transistors (see “Simplifie ..
PUMD16 ,NPN/PNP resistor-equipped transistorsapplications1.4 Quick reference data Table 2. Quick reference dataSymbol Parameter Conditions Min T ..
PUMD19 ,PEMD19; PUMD19; NPN/PNP resistor-equipped transistors; R1 = 22 kOhm, R2 = open
PUMD2 ,NPN/PNP resistor-equipped transistorFEATURES• Transistors with different polarity65 4handbook, halfpageand built-in bias resistors654– ..
PUMD20 ,NPN/PNP resistor-equipped transistors; R1 = 2.2 kOhm, R2 = 2.2 kOhmapplications1.4 Quick reference dataTable 2: Quick reference dataSymbol Parameter Conditions Min Ty ..
PUMD3 ,NPN/PNP resistor-equipped transistors; R1 = 10 k惟, R2 = 10 k惟General descriptionNPN/PNP Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SMD) plas ..
R2A20113SP , Critical Conduction Mode PFC Control IC
R2A20113SP , Critical Conduction Mode PFC Control IC
R2A20114 , Continuous Conduction Mode Interleaving PFC Control IC
R2J20605ANP#G3 , Integrated Driver - MOS FET (DrMOS)
R2J20652ANP , Integrated Driver - MOS FET (DrMOS)
R2S15900SP , 2ch Electronic Volume with Surround
PUMD16
NPN/PNP resistor-equipped transistors
Philips Semiconductors Product specification
NPN/PNP resistor-equipped transistors;
R1 = 22 kΩ , R2 = 47 kΩ PUMD16
FEATURES Built-in bias resistors Simplified circuit design Reduction of component count Reduced pick and place costs.
APPLICATIONS Low current peripheral driver Replacement of general purpose transistors in digital
applications Control of IC inputs.
DESCRIPTIONNPN/PNP resistor-equipped transistors (see “Simplified
outline, symbol and pinning” for package details).
QUICK REFERENCE DATA
PRODUCT OVERVIEW
Note*= p: Made in Hong Kong.= t: Made in Malaysia.= W: Made in China.
SIMPLIFIED OUTLINE, SYMBOL AND PINNING
Philips Semiconductors Product specification
NPN/PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 47 kΩ PUMD16
ORDERING INFORMATION
LIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).
Note Device mounted on an FR4 printed-circuit board, single-sided copper, standard footprint.
THERMAL CHARACTERISTICS
Note Device mounted on an FR4 printed-circuit board, single-sided copper, standard footprint.
Philips Semiconductors Product specification
NPN/PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 47 kΩ PUMD16
CHARACTERISTICSTamb =25 °C unless otherwise specified.
Philips Semiconductors Product specification
NPN/PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 47 kΩ PUMD16
PACKAGE OUTLINES
Plastic surface mounted package; 6 leads SOT363
Philips Semiconductors Product specification
NPN/PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 47 kΩ PUMD16
DATA SHEET STATUS
Notes Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL . For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given arein
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device theseorat any other conditions abovethosegivenin the
Characteristics sectionsof the specificationis not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make representationor warranty thatsuch applications willbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonablybe expectedto resultin personal injury. Philips
Semiconductors customers usingor selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the productisinfull production
(status ‘Production’), relevant changes will be
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumesno
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
