PUMB3 ,R1 = 4.7 kOhmLIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).SYMBOL PARAMETER C ..
PUMB30 ,PNP/PNP double resistor-equipped transistors; R1 = 2.2 kOhm, R2 = openLimiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter C ..
PUMD10 ,NPN/PNP resistor-equipped transistorsAPPLICATIONS PIN DESCRIPTION1, 4 emitter TR1; TR2• Especially suitable for spacereduction in portab ..
PUMD12 ,NPN/PNP resistor-equipped transistors; R1 = 47 k惟, R2 = 47 k惟Features and benefits 100 mA output current capability Reduces component count Built-in bias re ..
PUMD13 ,NPN/PNP resistor-equipped transistorsDISCRETE SEMICONDUCTORSDATA SHEETk, halfpageMBD128PUMD13NPN/PNP resistor-equippedtransistorsProduct ..
PUMD13 ,NPN/PNP resistor-equipped transistorsFeatures and benefits 100 mA output current capability Reduces component count Built-in bias re ..
R2880 , FAST ETHERNET RISC PROCESSOR
R2A20113SP , Critical Conduction Mode PFC Control IC
R2A20113SP , Critical Conduction Mode PFC Control IC
R2A20114 , Continuous Conduction Mode Interleaving PFC Control IC
R2J20605ANP#G3 , Integrated Driver - MOS FET (DrMOS)
R2J20652ANP , Integrated Driver - MOS FET (DrMOS)
PUMB3
R1 = 4.7 kOhm
Philips Semiconductors Product specification
PNP resistor-equipped double transistor; R1= 4.7 kΩ PUMB3
FEATURES Transistors with built-in bias resistor R1 (typ. 4.7 kΩ) No mutual interference between the transistors Simplification of circuit design Reduces number of components and board space.
APPLICATIONS General purpose switching and amplification Inverter and interface circuits Circuit driver.
DESCRIPTIONPNP resistor-equipped double transistor in an SC-88
(SOT363) plastic package.
MARKING
Note*= p: Made in Hong Kong.= t: Made in Malaysia.
PINNING
QUICK REFERENCE DATA
Philips Semiconductors Product specification
PNP resistor-equipped double transistor; R1= 4.7 kΩ PUMB3
LIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).
Note Transistor mounted on an FR4 printed-circuit board.
THERMAL CHARACTERISTICS
Note Transistor mounted on an FR4 printed-circuit board.
Philips Semiconductors Product specification
PNP resistor-equipped double transistor; R1= 4.7 kΩ PUMB3
CHARACTERISTICSTamb =25 °C unless otherwise specified.
Philips Semiconductors Product specification
PNP resistor-equipped double transistor; R1= 4.7 kΩ PUMB3
PACKAGE OUTLINE
Plastic surface mounted package; 6 leads SOT363
Philips Semiconductors Product specification
PNP resistor-equipped double transistor; R1= 4.7 kΩ PUMB3
DATA SHEET STATUS
Notes Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL .
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given arein
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device theseorat any other conditions abovethosegivenin the
Characteristics sectionsof the specificationis not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make representationor warranty thatsuch applications willbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonablybe expectedto resultin personal injury. Philips
Semiconductors customers usingor selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the rightto make changes, without notice,in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the useof anyof these products, conveysno licence ortitle
under any patent, copyright, or mask work right to these
products, and makesno representationsor warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
