PUMH16 ,NPN/NPN resistor-equipped transistors; R1 = 22 kOhm, R2 = 47 kOhmapplications1.4 Quick reference data Table 2. Quick reference dataSymbol Parameter Conditions Min T ..
PUMH17 ,PUMH17; NPN/NPN resistor-equipped transistors; R1 = 47 kOhm, R2 = 22 kOhm
PUMH17 ,PUMH17; NPN/NPN resistor-equipped transistors; R1 = 47 kOhm, R2 = 22 kOhmapplications1.4 Quick reference data Table 2. Quick reference dataSymbol Parameter Conditions Min T ..
PUMH18 ,NPN/NPN resistor-equipped transistors; R1 = 4.7 kOhm, R2 = 10 kOhmapplications1.4 Quick reference data Table 2. Quick reference dataSymbol Parameter Conditions Min T ..
PUMH19 ,NPN/NPN resistor-equipped transistors; R1 = 22 kOhm, R2 = openapplications1.4 Quick reference data Table 2. Quick reference dataSymbol Parameter Conditions Min T ..
PUMH2 ,NPN resistor-equipped double transistor
R2A20113SP , Critical Conduction Mode PFC Control IC
R2A20113SP , Critical Conduction Mode PFC Control IC
R2A20114 , Continuous Conduction Mode Interleaving PFC Control IC
R2J20605ANP#G3 , Integrated Driver - MOS FET (DrMOS)
R2J20652ANP , Integrated Driver - MOS FET (DrMOS)
R2S15900SP , 2ch Electronic Volume with Surround
PEMH16-PUMH16
NPN/NPN resistor-equipped transistors; R1 = 22 kOhm, R2 = 47 kOhm
Product profile1.1 General descriptionNPN/NPN Resistor-Equipped Transistors (RET).
1.2 Features Built-in bias resistors Simplifies circuit design Reduces component count Reduces pick and place costs
1.3 Applications Low current peripheral driver Control of IC inputs Replaces general-purpose transistors in digital applications
1.4 Quick reference data
PEMH16; PUMH16
NPN/NPN resistor-equipped transistors;
R1 = 22 kΩ, R2 = 47 kΩ
Rev. 04 — 15 November 2009 Product data sheet
Table 1. Product overviewPEMH16 SOT666 - PEMD16 PEMB16
PUMH16 SOT363 SC-88 PUMD16 PUMB16
Table 2. Quick reference dataVCEO collector-emitter voltage open base - - 50 V output current - - 100 mA bias resistor 1 (input) 15.4 22 28.6 kΩ
R2/R1 bias resistor ratio 1.7 2.1 2.6
NXP Semiconductors PEMH16; PUMH16
NPN/NPN resistor-equipped transistors; R1 = 22 kΩ, R2 = 47 kΩ Pinning information Ordering information Marking[1] * = -: made in Hong Kong
* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China
Table 3. Pinning GND (emitter) TR1 input (base) TR1 output (collector) TR2 GND (emitter) TR2 input (base) TR2 output (collector) TR1 4 23
sym063
Table 4. Ordering informationPEMH16 - plastic surface mounted package; 6 leads SOT666
PUMH16 SC-88 plastic surface mounted package; 6 leads SOT363
Table 5. Marking codesPEMH16 5K
PUMH16 H3*
NXP Semiconductors PEMH16; PUMH16
NPN/NPN resistor-equipped transistors; R1 = 22 kΩ, R2 = 47 kΩ Limiting values[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
Table 6. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).
Per transistorVCBO collector-base voltage open emitter - 50 V
VCEO collector-emitter voltage open base - 50 V
VEBO emitter-base voltage open collector - 7 V input voltage
positive - +40 V
negative - −7V output current - 100 mA
ICM peak collector current - 100 mA
Ptot total power dissipation Tamb≤25°C
SOT363 [1] -200 mW
SOT666 [1][2] -200 mW
Tstg storage temperature −65 +150 °C junction temperature - 150 °C
Tamb ambient temperature −65 +150 °C
Per devicePtot total power dissipation Tamb≤25°C
SOT363 [1] -300 mW
SOT666 [1][2] -300 mW
NXP Semiconductors PEMH16; PUMH16
NPN/NPN resistor-equipped transistors; R1 = 22 kΩ, R2 = 47 kΩ Thermal characteristics[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.
Characteristics
Table 7. Thermal characteristics
Per transistorRth(j-a) thermal resistance from
junction to ambient
in free air
SOT363 [1] -- 625 K/W
SOT666 [1][2] -- 625 K/W
Per deviceRth(j-a) thermal resistance from
junction to ambient
in free air
SOT363 [1] -- 416 K/W
SOT666 [1][2] -- 416 K/W
Table 8. CharacteristicsTamb =25 °C unless otherwise specified.
Per transistorICBO collector-base cut-off
current
VCB =50V; IE=0A - - 100 nA
ICEO collector-emitter
cut-off current
VCE =30V; IB =0A - - 1 μA
VCE =30V; IB =0A; = 150°C 50 μA
IEBO emitter-base cut-off
current
VEB =5V; IC=0A - - 120 μA
hFE DC current gain VCE =5V; IC =5mA 80 - -
VCEsat collector-emitter
saturation voltage =10mA; IB= 0.5 mA - - 150 mV
VI(off) off-state input voltage VCE =5V; IC =100 μA- 0.8 0.5 V
VI(on) on-state input voltage VCE =0.3 V; IC =2mA 2 1.1 - V bias resistor 1 (input) 15.4 22 28.6 kΩ
R2/R1 bias resistor ratio 1.7 2.1 2.6 collector capacitance VCB =10V; IE =ie =0A; 1MHz 2.5 pF
NXP Semiconductors PEMH16; PUMH16
NPN/NPN resistor-equipped transistors; R1 = 22 kΩ, R2 = 47 kΩ
NXP Semiconductors PEMH16; PUMH16
NPN/NPN resistor-equipped transistors; R1 = 22 kΩ, R2 = 47 kΩ Package outline Packing information[1] For further information and the availability of packing methods, see Section12.
[2] T1: normal taping
[3] T2: reverse taping
Table 9. Packing methodsThe indicated -xxx are the last three digits of the 12NC ordering code.[1]
PEMH16 SOT666 2 mm pitch, 8 mm tape and reel - - -315 - mm pitch, 8 mm tape and reel - -115 - -
PUMH16 SOT363 4 mm pitch, 8 mm tape and reel; T1 [2] -115- - -135 mm pitch, 8 mm tape and reel; T2 [3] -125- - -165
