PCA9535RGER ,Remote 16-Bit I2C and SMBus, Low-Power I/O Expander With Interrupt Output and Config Registers 24-VQFN -40 to 85Maximum Ratings . 510.1 Power-On Reset Errata..... 256.2 Handling Ratings. 511 Device and Documenta ..
PCA9535RHLR , REMOTE 16-BIT I2C AND SMBus, LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION REGISTERS
PCA9535RHLR , REMOTE 16-BIT I2C AND SMBus, LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION REGISTERS
PCA9535RTWR ,Remote 16-Bit I2C and SMBus, Low-Power I/O Expander With Interrupt Output and Config Registers 24-WQFN -40 to 85Features 2 DescriptionThis 16-bit I/O expander for the two-line bidirectional1• Low Standby-Current ..
PCA9536D ,4-bit I2C-bus and SMBus I/O portMaximum Ratingsover operating free-air temperature range (unless otherwise noted)MIN MAX UNITV Supp ..
PCA9536DGKR ,Remote 4-Bit I2C and SMBus I/O Expander with Configuration Registers 8-VSSOP -40 to 85features 4-bit Configuration (input orto 5.5 Voutput selection), Input Port, Output Port, and Polar ..
PEMD12 ,NPN/PNP resistor-equipped transistors; R1 = 47 k惟, R2 = 47 k惟General descriptionNPN/PNP double Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SM ..
PEMD13 ,NPN/PNP resistor-equipped transistors; R1 = 4.7 k惟, R2 = 47 k惟General descriptionNPN/PNP double Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SM ..
PEMD2 ,NPN/PNP resistor-equipped transistors; R1 = 22 k惟, R2 = 22 k惟 PEMD2; PIMD2; PUMD2NPN/PNP resistor-equipped transistors;R1 = 22 k, R2 = 22 kRev. 8 — 14 Novembe ..
PEMD3 ,NPN/PNP resistor-equipped transistors R1 = 10 kOhm/R2 = 10 kOhmapplications1.4 Quick reference data Table 2. Quick reference dataSymbol Parameter Conditions Min T ..
PEMD3 ,NPN/PNP resistor-equipped transistors R1 = 10 kOhm/R2 = 10 kOhm PEMD3; PIMD3; PUMD3NPN/PNP resistor-equipped transistors;R1 = 10 k, R2 = 10 kRev. 11 — 25 Septem ..
PEMD30 ,NPN/PNP double resistor-equipped transistors; R1 = 2.2 kOhm, R2 = openLimiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter C ..
PCA9535DB-PCA9535DGVR-PCA9535DWR-PCA9535PW-PCA9535PWG4-PCA9535PWR-PCA9535RGER-PCA9535RTWR
16-bit I2C and SMBus, low power I/O port with interrupt
DB,DBQ, DGV, DW,OR PW PACKAGE
(TOPVIEW)VCC
SDA23222120
RGE PACKAGE
(TOPVIEW)A1INT
P01
P02
P03
P04
P05
P17
P00
P01
P02
This 16-bit I/O expander for the bidirectional Low Standby-Current Consumptionof1 μA Max bus (I2C) is designed for 5.5-V VCC•I2Cto Parallel Port Expander operation.It provides general-purpose remote I/O• Open-Drain Active-Low Interrupt Output expansion for most microcontroller via theI2C
interface [serial clock (SCL), serial (SDA)].• 5-V Tolerant I/O Ports Compatible With Most Microcontrollers The PCA9535 consists of two Configuration
(inputor output selection), Input Output Port,• 400-kHz FastI2C Bus and Polarity Inversion (active-high or active-low• Addressby Three Hardware Address Pins for Use operation) registers. At power the I/Os areofupto Eight Devices configured as inputs. The system can enable• Polarity Inversion Register the I/Os as either inputsor outputs writingto the
I/O configuration bits. The data input or• Latched Outputs With High-Current Drive outputis keptin the correspondingor OutputCapability for Directly Driving LEDs Port register. The polarityof the Port register• Latch-Up Performance Exceeds 100 mA Per canbe inverted with the Polarity register.AllJESD 78, ClassII registers canbe readby the system ESD Protection Exceeds JESD22 The system master can resetin the– 2000-V Human-Body Model (A114-A) eventofa timeout or other improper operation by 1000-V Charged-Device Model (C101) utilizing the power-on reset feature, puts the
registers in their default state initializes the2 C/SMBus state machine.
