OPA2355DGSA/250 ,2.5V, 200MHz GBW, CMOS Dual Op Amp With ShutdownMAXIMUM RATINGSELECTROSTATICSupply Voltage, V+ to V– .... 7.5V(2) DISCHARGE SENSITIVITYSignal Input ..
OPA2355DGSA/250 ,2.5V, 200MHz GBW, CMOS Dual Op Amp With ShutdownFEATURESThe OPA355 series high-speed, voltage-feedback CMOS* UNITY-GAIN BANDWIDTH: 450MHzoperationa ..
OPA2355DGSA/250G4 ,2.5V, 200MHz GBW, CMOS Dual Op Amp With Shutdown 10-VSSOP -40 to 125ELECTRICAL CHARACTERISTICS: V = +2.7V to +5.5V Single-SupplySBoldface limits apply over the specifi ..
OPA2356AID ,2.5V, 200MHz GBW, CMOS Dual Op AmpMAXIMUM RATINGSELECTROSTATICSupply Voltage, V+ to V– .... 7.5VDISCHARGE SENSITIVITY(2)Signal Input ..
OPA2356AIDG4 ,2.5V, 200MHz GBW, CMOS Dual Op Amp 8-SOIC -40 to 125FEATURES PRODUCT* VIDEO PROCESSING200MHz, Rail-to-Rail Output, CMOS, Shutdown OPAx35538MHz, Rail-to ..
OPA2356AIDGKR ,2.5V, 200MHz GBW, CMOS Dual Op AmpOPA2356OPA356O 2356PAOPA356OPA2356SBOS212A – NOVEMBER, 2001200MHz, CMOSOPERATIONAL AMPLIFIERDESCRIP ..
P6KE250A ,600 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
P6KE250A ,600 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
P6KE250A ,600 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
P6KE250ARL ,TRANSILAbsolute Maximum Ratings (T = 25°C)ambSymbol Parameter Value UnitP T initial = TPeak pulse power di ..
P6KE250CA ,600 Watt peak power transient voltage suppressor. Reverse stand-off voltage VRWM = 214.00 V. Test current IT = 1 mA.
P6KE250CA ,600 Watt peak power transient voltage suppressor. Reverse stand-off voltage VRWM = 214.00 V. Test current IT = 1 mA.
OPA2355DGSA/250-OPA2355DGSA/250G4
2.5V, 200MHz GBW, CMOS Dual Op Amp With Shutdown
OPA355
OPA2355
OPA3355SBOS195D – MARCH 2001 – REVISED JANUARY 2004
DESCRIPTIONThe OPA355 series high-speed, voltage-feedback CMOS
operational amplifiers are designed for video and other
applications requiring wide bandwidth. The OPA355 is unity-
gain stable and can drive large output currents. In addition,
the OPA355 has a digital shutdown (Enable) function. This
feature provides power savings during idle periods and
places the output in a high-impedance state to support output
multiplexing. Differential gain is 0.02% and differential phase
is 0.05°. Quiescent current is only 8.3mA per channel.
The OPA355 is optimized for operation on single or dual
supplies as low as 2.5V (±1.25V) and up to 5.5V (±2.75V).
Common-mode input range for the OPA355 extends 100mV
below ground and up to 1.5V from V+. The output swing is
within 100mV of the rails, supporting wide dynamic range.
The OPA355 series is available in single (SOT23-6 and
SO-8), dual (MSOP-10), and triple (TSSOP-14 and SO-14)
versions. Multichannel versions feature completely indepen-
dent circuitry for lowest crosstalk and freedom from interac-
tion. All are specified over the extended –40°C to +125°C
range.
FEATURES UNITY-GAIN BANDWIDTH: 450MHz WIDE BANDWIDTH: 200MHz GBW HIGH SLEW RATE: 360V/μs LOW NOISE: 5.8nV/√Hz EXCELLENT VIDEO PERFORMANCE:
DIFF GAIN: 0.02%, DIFF PHASE: 0.05°
0.1dB GAIN FLATNESS: 75MHz INPUT RANGE INCLUDES GROUND RAIL-TO-RAIL OUTPUT (within 100mV) LOW INPUT BIAS CURRENT: 3pA LOW SHUTDOWN CURRENT: 3.4μA ENABLE/DISABLE TIME: 100ns/30ns THERMAL SHUTDOWN SINGLE-SUPPLY OPERATING RANGE: 2.5V to 5.5V MicroSIZE PACKAGES
200MHz, CMOS
OPERATIONAL AMPLIFIER WITH SHUTDOWN
APPLICATIONS VIDEO PROCESSING ULTRASOUND OPTICAL NETWORKING, TUNABLE LASERS PHOTODIODE TRANSIMPEDANCE AMPS ACTIVE FILTERS HIGH-SPEED INTEGRATORS ANALOG-TO-DIGITAL (A/D) CONVERTER
INPUT BUFFERS DIGITAL-TO-ANALOG (D/A) CONVERTER
OUTPUT AMPLIFIERS BARCODE SCANNERS COMMUNICATIONS
OPA355 RELATED PRODUCTS Out Enable
–VIN
+VIN
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
