NB100ELt23LDR2 ,3.3V Dual Differential LVPECL to LVTTL Translator2NB100ELT23LTable 4. PECL DC CHARACTERISTICS V = 3.3 V, GND = 0 V (Note 2)CC−40°C 25°C 85°CMin Typ ..
NB100EP223 ,3.3V 1:22 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Output Enable3AN1672/DSection 2: Translation from Different ECL Operating Mode Drivers to Non ECL ReceiversThe f ..
NB100EP223FA ,3.3V 1:22 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Output Enable3AND8090/DAC Test BoardsAn example of an AC characteristic test board is shown inEach test device i ..
NB100EP223FAG , 3.3V1:22 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Output Enable
NB100LVEP221FARG , 2.5V/3.3V 1:20 Differential HSTL/ECL/PECL Clock Driver
NB100LVEP222 ,2.5V/3.3V 1:15 Differential ECL/PECL w1/w2 Clock DriverPrepared byCleon PettyAPPLICATION NOTETodd PearsonECL Applications EngineeringThis application note ..
NJM2076S , DUAL LOW VOLTAGE POWER AMPLIFIER
NJM2078 , VOLTAGE DETECTOR
NJM2082 , DUAL J-FET INPUT OPERATIONAL AMPLIFIER
NJM2096M , LOW VOLTAGE DUAL POWER AMPLIFIER
NJM2102 , SYSTEM RESET IC
NJM2102 , SYSTEM RESET IC
NB100ELt23LDR2
3.3V Dual Differential LVPECL to LVTTL Translator
NB100ELT23L
3.3V�Dual Differential
LVPECL/L VDS to LVTTL
Translator
The NB100ELT23L is a dual differential LVPECL/LVDS to LVTTL
translator. Because L VPECL (Positive ECL) or LVDS levels are used,
only +3.3 V and ground are required. The small outline 8-lead package
and the dual gate design of the ELT23L makes it ideal for applications
which require the translation of a clock and a data signal.
The ELT23L is available in only the ECL 100K standard. Since
there are no LVPECL outputs or an external VBB reference, the
ELT23L does not require both ECL standard versions. The LVPECL
inputs are differential. Therefore, the NB100ELT23L can accept any
standard differential LVPECL/LVDS input referenced from a VCC of
+3.3 V. 2.1 ns Typical Propagation Delay Maximum Operating Frequency > 160 MHz 24 mA LVTTL Outputs Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V Q Output Will Default LOW with Inputs Open or at GND Pb−Free Packages are Available*
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
