MC74AC4040M ,12-Stage Binary Ripple Counter * 12-STAGEBINARY RIPPLEThe MC74AC4040 consists of 12 master-slave flip-flops. The output of each ..
MC74AC4040N ,12-Stage Binary Ripple Counterhttp://onsemi.com2MC74AC4040DC CHARACTERISTICS (unless otherwise specified)Symbol Parameter Value U ..
MC74AC521 , 8-BIT IDENTITY COMPARATOR
MC74AC534N ,OCTAL D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS* ** OCTAL D-TYPEFLIP-FLOP WITH* * *3-STATE OUTPUTSThe MC74AC534/74ACT534 is a high-speed, low-p ..
MC74AC540DWR2 ,Octal Buffer/Line Driver with 3 State Outputs**OCTAL ** ** BUFFER/LINE DRIVERWITH 3-STATE *!** *OUTPUTSThe MC74AC540/74ACT540 and MC74AC541/7 ..
MC74AC540N ,Octal Buffer/Line Driver with 3 State OutputsMAXIMUM RATINGS*Symbol Parameter Value UnitV DC Supply Voltage (Referenced to GND) –0.5 to +7.0 VCC ..
MCP1525T-I , 2.5V and 4.096V Voltage References
MCP1541 , 2.5V AND 4.096V VOLTAGE REFERENCES
MCP2140 , Infrared Encoder/Decoder
MCP2551 , High-Speed CAN Transceiver
MCP3010 , NON-ZERO-CROSSING TRIACS
MCP3010 , NON-ZERO-CROSSING TRIACS
MC74AC4040M
12-Stage Binary Ripple Counter
-The MC74AC4040 consists of 12 master-slave flip-flops. The output of each
flip-flop feeds the next and the frequency at each output is half that of the preceding
one. The state of the counter advances on the negative-going edge of the Clock
input. Reset is asynchronous and active-high.
State changes of the Q outputs do not occur simultaneously because of internal
ripple delays. Therefore, decoded output signals are subject to decoding spikes
and may have to be gated with the Clock of the MC74AC4040 for some designs. 140 MHz Typ. Clock Outputs Source/Sink 24 mA Operating Voltage Range: 2.0 to 6.0 V High Noise Immunity
FUNCTION TABLE
LOGIC DIAGRAMCLOCK10RESET
PIN 16 = VCC
PIN 8 = GND
Q10
Q11
Q12