MC14551BFEL ,Quad 2-Input Analog MultiplexerELECTRICAL CHARACTERISTICSÎÎÎÎÎ – 55C 25C 125C(4.)Min Max Min Typ Max Min MaxCharacteristic Symb ..
MC14553 ,3-Digit BCD CounterMaximum Ratings are those values beyond which damage to the device may occur.†Temperature Derating: ..
MC145532DW ,ADPCM TranscoderFUNCTIONAL DESCRIPTIONENCODING/DECODING RATES ENCODER OUTPUT — SHORT FRAMEFigure 3 shows the timing ..
MC145532L ,ADPCM TranscoderFUNCTIONAL DESCRIPTIONENCODING/DECODING RATES ENCODER OUTPUT — SHORT FRAMEFigure 3 shows the timing ..
MC14553B ,3-Digit BCD Counter**SEMICONDUCTOR TECHNICAL DATA** * *L SUFFIXThe MC14553B 3–digit BCD counter consists of 3 negativ ..
MC14553BCL ,3-digit BCD counter**SEMICONDUCTOR TECHNICAL DATA** * *L SUFFIXThe MC14553B 3–digit BCD counter consists of 3 negativ ..
MC74AC02DTR2 ,Quad 2-Input NOR Gatehttp://onsemi.com3MC74AC02 MC74ACT02OUTLINE DIMENSIONSN SUFFIXPLASTIC DIP PACKAGECASE 646–06ISSUE L ..
MC74AC02N ,Quad 2-Input NOR Gate * *QUAD 2-INPUTNOR GATE• Outputs Source/Sink 24 mA• ′ACT02 Has TTL Compatible InputsVCC14 13 12 1 ..
MC74AC02N ,Quad 2-Input NOR GateMAXIMUM RATINGS*Symbol Parameter Value UnitV DC Supply Voltage (Referenced to GND) –0.5 to +7.0 VCC ..
mc74AC04 ,Hex InverterMAXIMUM RATINGS*Rating Symbol Value UnitEIAJ–14DC Supply Voltage (Referenced to GND) V –0.5 to VM S ..
MC74AC04D ,Hex Inverterhttp://onsemi.com2MC74AC04, MC74ACT04AC CHARACTERISTICS (For Figures and Waveforms – See Section 3 ..
MC74AC04D ,Hex InverterMAXIMUM RATINGS*Symbol Parameter Value UnitV DC Supply Voltage (Referenced to GND) –0.5 to +7.0 VCC ..
MC14551BD-MC14551BFEL
Quad 2-Input Analog Multiplexer
MC14551B
Quad 2-Channel Analog
Multiplexer/Demultiplexer
The MC14551B is a digitally–controlled analog switch. This device
implements a 4PDT solid state switch with low ON impedance and
very low OFF Leakage current. Control of analog signals up to the
complete supply voltage range can be achieved. Triple Diode Protection on All Control Inputs Supply Voltage Range = 3.0 Vdc to 18 Vdc Analog Voltage Range (VDD – VEE) = 3.0 to 18 V
Note: VEE must be � VSS Linearized Transfer Characteristics Low Noise — 12 nV√Cycle, f ≥ 1.0 kHz typical For Low RON, Use The HC4051, HC4052, or HC4053 High–Speed
CMOS Devices Switch Function is Break Before Make
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Maximum Ratings are those values beyond which damage to the device
may occur. Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/�C From 65�C To 125�C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
high–impedance circuit. For proper operation, Vin and Vout should be constrained
to the range VSS � (Vin or Vout) � VDD for control inputs and VEE ≤ (Vin or Vout) ≤
VDD for Switch I/O.
Unused inputs must always be tied to an appropriate logic voltage level (e.g.,
either VSS, VEE or VDD). Unused outputs must be left open.
