MAX13183EELB+ ,+5.0V, ±15kV ESD-Protected, Half-Duplex/Full-Duplex, RS-485 Transceiver in µDFNELECTRICAL CHARACTERISTICS(V = +5V ±10%, T =T to T , unless otherwise noted. Typical values are at ..
MAX1318ECM ,8-/4-/2-Channel, 14-Bit, Simultaneous-Sampling ADCs with 10V, 5V, and 0 to +5V Analog Input RangesFeaturesThe MAX1316–MAX1318/MAX1320–MAX1322/MAX1324– ♦ 8-/4-/2-Channel, 14-Bit ADCsMAX1326 14-bit, ..
MAX1318ECM+ ,8-/4-/2-Channel, 14-Bit, Simultaneous-Sampling ADCs with ±10V, ±5V, and 0 to +5V Analog Input RangesFeaturesThe MAX1316–MAX1318/MAX1320–MAX1322/MAX1324– ♦ 8-/4-/2-Channel, 14-Bit ADCsMAX1326 14-bit, ..
MAX131ACQH ,3 Digit A/D Converters with Bandgap RefrenceFeatures
. Pin Compatible Upgrade for iCL7106 and ICL7136
t High Stability Bandgap Reference
..
MAX131AEPL+ ,3 1/2 Digit ADC with Bandgap Referenceapplications the "A suffix" parts, the
MAX130A and MAX131A, have a 50ppm/°C maximum
temperature c ..
MAX131CPL ,3 Digit A/D Converters with Bandgap Refrenceapplications the "A suffix" parts, the
MAX130A and MAX131A, have a 50ppm/°C maximum
temperature c ..
MAX393CUE+ ,Precision, Quad, SPST Analog SwitchesApplicationsMAX391CUE 0°C to +70°C 16 TSSOP U16-2Battery-Operated Systems Sample-and-Hold Circuit ..
MAX393ESE ,Precision, Quad, SPST Analog SwitchesFeaturesThe MAX391/MAX392/MAX393 are precision, quad, Low On-Resistance, 20Ω Typicalsingle-pole/s ..
MAX393ESE ,Precision, Quad, SPST Analog SwitchesFeaturesThe MAX391/MAX392/MAX393 are precision, quad, Low On-Resistance, 20Ω Typicalsingle-pole/s ..
MAX393ESE/T ,Precision, Quad, SPST Analog SwitchesFeaturesThe MAX391/MAX392/MAX393 are precision, quad, ♦ Low On-Resistance, 20Ω Typicalsingle-pole/s ..
MAX393ESE+ ,Precision, Quad, SPST Analog SwitchesGeneral Description ________
MAX393ESE-T ,Precision, Quad, SPST Analog SwitchesApplicationsMAX391CUE 0°C to +70°C 16 TSSOP U16-2Battery-Operated Systems Sample-and-Hold Circuit ..
MAX13182EELB+-MAX13183EELB+
+5.0V, ±15kV ESD-Protected, Half-Duplex/Full-Duplex, RS-485 Transceiver in µDFN
General DescriptionThe MAX13181E–MAX13184E are full-duplex and selec-
table half-/full-duplex RS-485 transceivers in a tiny 2mm x
2mm µDFN package. These devices are designed for
space-constrained applications byincluding extended
ESD protection to ±15kV per Human Body Model (HBM)
and integrating pullup/pulldown resistors on the DE, RE
and H/Finputs to reduce external components. The
MAX13182E/MAX13184E feature a low-current shutdown
mode for power-sensitive applications.
These devices have a 1/8 unit-load input receiver
that allows up to 256 transceivers on the bus.The
MAX13181E/MAX13182E feature reduced slew-rate
drivers to minimize EMI and reflections that are caused
by improperly terminated cables. The slew-rate limited
MAX13181E/MAX13182E allow error-free data transmis-
sion up to 250kbps. The MAX13183E/MAX13184E feature
full-speed drivers, allowing data rates of up to 16Mbps.
The MAX13182E/MAX13184E are configured for full-
duplex operation, while the MAX13181E/MAX13183E
feature pin-selectable half- or full-duplex operation. All
driver outputs and receiver inputs include extended
ESD protection.
The MAX13181E–MAX13184E are available in a tiny 10-
pin, 2mm x 2mm µDFN. The MAX13183E/MAX13184E are
also available in industry-standard 14-pin SO packages.
The devices operate over the extended -40°C to +85°C
temperature range.
Applications
FeaturesAvailable in Tiny, 10-Pin, 2mm x 2mm, µDFN and
14-Pin SO Packages+5.0V OperationExtended ESD Protection
±15kV Human Body Model
±12kV IEC 61000-4-2 Air-Gap Disharge
±6kV IEC 61000-4-2 Contact DishargeSlew-Rate Limiting Facilitates Error-Free Data
Transmission (MAX13181E/MAX13182E)2.5µA (typ) Low-Current Shutdown Mode1/8-Unit Load Allows Up to 256 Transceivers on
the Bus
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFN19-0879; Rev 0; 7/07
Ordering Information
PARTTEMP RANGEPIN-PACKAGETOP MARKPKG CODE
MAX13181EELB+-40°C to +85°C10 µDFNABCL1022-1
MAX13182EELB+-40°C to +85°C10 µDFNABDL1022-1
MAX13182EESD+-40°C to +85°C14 SO—S14-1
Industrial Control
Motor Drive Control
Telecom
Security System
Instrumentation
Selector Guide
PARTHALF/FULL
DUPLEX
MAXIMUM DATA
RATE
SLEW-RATE
LIMITED
LOW-POWER
SHUTDOWN
RECEIVER
ENABLE
MAX13181ESelectable250 kbpsYesNoNo
MAX13182EFull250 kbpsYesYesYes
MAX13183ESelectable16 MbpsNoNoNo
MAX13184EFull16 MbpsNoYesYes
Pin ConfigurationsMAX13182E
MAX13184E
VCCROREDEDI
TOP VIEW
µDFN+GND
MAX13181E
MAX13183E
VCCROH/FDEDIZ
µDFNGND
Pin Configurations continued at end of data sheet.
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFN
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS(VCC= +5V ±10%, TA=TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(All voltages referenced to GND.)
Supply Voltage (VCC)...............................................-0.3V to +6V
Control Voltage (RE, DE, DI, H/F).............................-0.3V to +6V
Driver Output Voltage (A, B, Y, Z)..........................-8V to +12.5V
Receiver Input Voltage (A, B).................................-8V to +12.5V
Receiver Input Voltage Full-Duplex (A, B)..............-8V to +12.5V
Receiver Output Voltage (RO)...................-0.3V to (VCC+ 0.3V)
Short-Circuit Duration (A, B, Y, Z) to GND.................Continuous
Continuous Power Dissipation (TA= +70°C)
10-Pin µDFN (derate 5mW/°C above +70°C ).............403mW
14-Pin SO (derate 8.3mW/°C above +70°C )...............667mW
Operating Temperature Range...........................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Junction Temperature......................................................+150°C
Lead Temperature (soldering, 10s).................................+300°C
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
DRIVERRL = 100Ω (RS422), Figure 12VCCV
RL = 54Ω (RS485), Figure 11.5VCCDifferential Driver OutputVOD
No loadVCCV
Change in Magnitude of Differential
Output VoltageΔVODRL = 100Ω or 54Ω, Figure 1, (Note 2)0.2V
Driver Common-Mode Output VoltageVOCRL = 100Ω or 54Ω, Figure 1VCC / 23V
Change in Magnitude
of Common-Mode VoltageΔVOCRL = 100Ω or 54Ω, Figure 1, (Note 2)0.2V
Input-High VoltageVIHDE, DI, RE, H/F2V
Input-Low VoltageVILDE, DI, RE, H/F0.8V
Input HysteresisVHYSDE, DI, RE, H/F100mV
Internal Pullup ResistanceRIN_UPInternal pullup RE125400kΩ
Internal Pulldown ResistanceRIN_DWNInternal pulldown DE, H/F125400kΩ
VIN = +12V125Output Leakage (Y and Z)
Full-DuplexIODE = GND, VCC = GND or
5.5VVIN = -7V-100µA
0 ≤ VOUT ≤ 12V40250Driver Short-Circuit Output Current
Threshold (Note 3)IOSD-7 ≤ VOUT ≤ VCC-250-40mA
(VCC - 1V) ≤ VOUT ≤ 12V20Driver Short-Circuit Foldback Output
Current (Note 3)IOSDF-7V ≤ VOUT ≤ 1V-20mA
Thermal-Shutdown ThresholdTTS 0 ≤ VOUT ≤ 12V140°C
Thermal-Shutdown HysteresisTTSH 15°C
VIN = +12V125Input Current (A and B)IA, BD E = GN D , V C C = GN D or
5.5V VIN = -7V-100µA
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFN
DC ELECTRICAL CHARACTERISTICS (continued)(VCC= +5V ±10%, TA=TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Note 1)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
RECEIVERReceiver Differential Threshold
VoltageVTH -7V ≤ VCM ≤ +12V, Figure 2-2000+200mV
Receiver Input HysteresisVTHVA + VB = 0, Figure 225mV
RO Output-High VoltageVOHIO = -1mA, Figure 2VCC -
0.6V
RO Output-Low VoltageVOLIO = 1mA, Figure 20.4V
Tri-State Output Current at ReceiverIOZR0 ≤ VO ≤ VCC, Figure 2-1+1µA
Receiver-Input ResistanceRIN-7V ≤ VCM ≤ +12V, Figure 296kΩ
Receiver-Output Short-Circuit CurrentIOSR0 ≤ VRO ≤ VCC, Figure 2-80+80mA
SUPPLY CURRENTNo load, RE = 0, DE = VCC23
No load, RE = VCC, DE = VCC23Supply CurrentICC
No load, RE = 0V, DE = 0 or leave
unconnected23
Shutdown Current
(MAX13182E/MAX13184E Only)ISHDNRE = VCC or leave unconnected,
DE = GND or leave unconnected2.510µA
ESD PROTECTIONHuman Body Model±15
IEC 61000-4-2 Contact Discharge±6ESD Protection for Y, Z, A and B
IEC 61000-4-2 Air-Gap Discharge±12
DRIVER SWITCHING CHARACTERISTICS—MAX13181E/MAX13182E (SLEW-RATE LIMITED
TO 250kbps)(VCC= +5V ±10%, TA=TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Note 1)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITStDPLHCL = 50pF, RL = 54Ω, Figure 32001000Driver Propagation DelaytDPHLCL = 50pF, RL = 54Ω, Figure 32001000ns
Driver Differential Output Rise or
Fall TimetDR, tDFCL = 50pF, RL = 54Ω, Figure 34001200ns
Differential Driver Output Skew
(tDPLH - tDPHL)tDSKEWCL = 50pF, RL = 54Ω, Figure 3140ns
Maximum Data Rate250kbps
Driver Enable to Output HightDZHFigure 4a2500ns
Driver Enable to Output LowtDZLFigure 4b2500ns
Driver Disable Time from LowtDLZFigure 4b100ns
Driver Disable Time from HightDHZFigure 4a100nsr i ver E nab l e fr om S hutd ow n to Outp ut H i g htDZH(SHDN)(MAX13182E) Figure 4a5500nsr i ver E nab l e fr om S hutd ow n to Outp ut Low tDZL(SHDN)(MAX13182E) Figure 4b5500ns
Time to ShutdowntSHDN(MAX13182E)50200600ns
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFN
DRIVER SWITCHING CHARACTERISTICS—MAX13183E/MAX13184E (MAXIMUM DATA
RATE OF 16Mbps)(VCC= +5V ±10%, TA=TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Note 1)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITStDPLHCL = 50pF, RL = 54Ω, Figure 325Driver Propagation DelaytDPHLCL = 50pF, RL = 54Ω, Figure 325nsr i ver D i ffer enti al Outp ut Ri se or Fal l Ti m etDR, tDFCL = 50pF, RL = 54Ω, Figure 315ns
Differential Driver Output Skew
(tDPLH - tDPHL)tDSKEWCL = 50pF, RL = 54Ω, Figure 38ns
Maximum Data Rate16Mbps
Driver Enable to Output-HightDZHFigures 1 and 4a50ns
Driver Enable to Output-LowtDZLFigures 1 and 4b50ns
Driver Disable Time from LowtDLZFigures 1 and 4b50ns
Driver Disable Time from HightDHZFigures 1 and 4a50ns
Driver Enable from Shutdown to Output
HightDZH (SHDN)Figures 1 and 4a (MAX13184E)2200ns
Driver Enable from Shutdown to Output
LowtDZL (SHDN)Figures 1 and 4b (MAX13184E)2200ns
Time to ShutdowntSHDN(MAX13184E)50200600ns
RECEIVER SWITCHING CHARACTERISTICS(VCC= +5V ±10%, TA=TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Note 1)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITStRPLH4075Receiver Propagation DelaytRPHLCL = 15pF, Figure 54075ns
Receiver Output Skew (tRPLH - tRPHL)tRSKEWCL = 15pF, Figure 58ns
Maximum Data Rate16Mbps
Receiver Enable to Output LowtRZL(MAX13182E/MAX13184E)
Figures 2 and 650ns
Receiver Enable to Output HightRZH(MAX13182E/MAX13184E)
Figures 2 and 650ns
Receiver Disable Time from LowtRLZ(MAX13182E/MAX13184E)
Figures 2 and 650ns
Receiver Disable Time from HightRHZ(MAX13182E/MAX13184E)
Figures 2 and 650ns
Receiver Enable from Shutdown to
Output HightRZH (SHDN)(MAX13182E/MAX13184E)
Figures 2 and 62200ns
Receiver Enable from Shutdown to
Output LowtRZL (SHDN)(MAX13182E/MAX13184E)
Figures 2 and 62200ns
Note 1:All currents into the device are positive. All currents out of the device are negative. All voltages are referred to device ground,
unless otherwise noted. µDFN devices are production tested at +25°C. Overtemperature limits are guaranteed by design.
Note 2:ΔVODand ΔVOCare the changes in VODand VOC, respectively, when the DI input changes state.
Note 3:The short-circuit output current applies to peak current just prior to foldback current limiting. The short-circuit foldback output
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFNVODCLVOC
Figure 1. Driver Differential Output
A (Y)
B (Z)
GND
VOH
VOL
Figure 2. Receiver Differential Input
-VO
1.5V
tDPLHtDPHL
1/2 VO
10%
tDR
90%90%
1/2 VO
10%
tDF
VDIFF = V (Y) - V (Z)
VDIFF
tDSKEW = | tDPLH - tDPHL
Figure 3. Driver Propagation DelaytDZH , tDZH(SHDN)
VCC / 2
VCC
VOH
VOM = (0 + VOH) / 2
tDHZ
OUT
0.5V
GENERATOR50Ω
50pFRL = 500Ω
OUT
0 OR 3VD
Figure 4a. Driver Enable and Disable Times (tDHZ, tDZH, tDZH(SHDN))
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFNVOL
tDZL , tDZL(SHDN)
VCC / 2
VCC
VOH
VOM = (VOL + VCC) / 2
tDLZ
OUT
VCC
0.5V
GENERATOR50ΩCL
50pF
RL = 500Ω
OUT
0 OR 3V
VCC
Figure 4b. Driver Enable and Disable Times (tDLZ, tDZL, tDZL(SHDN))
A (Y)
B (Z)
VOH
1.5V
tRPLH
tRPHL
VOL
+1V
-1V
tRSKEW = | tRPLH - tRPHL |
THE RISE TIME AND FALL TIME OF INPUTS A, B, Y AND Z < 4ns
Figure 5. Receiver Propagation Delay
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFNS1 OPEN
S2 CLOSED
S3 = +1.5V
VOH
VOH / 2
S1 OPEN
S2 CLOSED
S3 = +1.5V
tRHZ
VOH
0.5V
2.5V
S1 CLOSED
S2 OPEN
S3 = -1.5V
VOL
VCC
1.5V
S1 CLOSED
S2 OPEN
S3 = -1.5V
tRLZ
VOL
2.5V
0.5V
GENERATOR
+1.5V
1kΩ
15pFS2
50Ω
-1.5VRVID
tRZH, tRZH(SHDN)tRZL, tRZL(SHDN)
(VOL + VOH) / 2
Figure 6. Receiver Disable Time
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFN
Typical Operating Characteristics(VCC= +5V, TA= 25°C, unless otherwise noted.)
SUPPLY CURRENT
vs. TEMPERATURE
MAX13181E-4E toc01
TEMPERATURE (°C)
SUPPLY CURRENT (mA)
NO LOAD
RE = VCC
DE = VCC1345
OUTPUT CURRENT
vs. RECEIVER OUTPUT HIGH VOLTAGEMAX13181E-4E toc02
RECEIVER OUTPUT HIGH VOLTAGE (V)
OUTPUT CURRENT (mA)1345
OUTPUT CURRENT
vs. RECEIVER OUTPUT LOW VOLTAGEMAX13181E-4E toc03
RECEIVER OUTPUT LOW VOLTAGE (V)
OUTPUT CURRENT (mA)
RECEIVER OUTPUT HIGH VOLTAGE
vs. TEMPERATURE
MAX13181E-4E toc04
TEMPERATURE (°C)
RECEIVER OUTPUT HIGH VOLTAGE (V)
IO = -1mA
RECEIVER OUTPUT LOW VOLTAGE
vs. TEMPERATURE
MAX13181E-4E toc05
TEMPERATURE (°C)
RECEIVER OUTPUT LOW VOLTAGE (V)
IO = -1mA801345
DRIVER DIFFERENTIAL OUTPUT CURRENT
vs. DIFFERENTIAL OUTPUT VOLTAGEMAX13181E-4E toc06
DIFFERENTIAL OUTPUT VOLTAGE (V)
DRIVER DIFFERENTIAL OUTPUT CURRENT (mA)
DRIVER DIFFERENTIAL OUTPUT VOLTAGE
vs. TEMPERATURE
MAX13181E-4E toc07
DRIVER DIFFERENTIAL OTUPUT VOLTAGE (V)
RL = 54Ω
OUTPUT CURRENT
vs. TRANSMITTER OUTPUT HIGH VOLTAGEMAX13181E-4E toc08
OUTPUT CURRENT (mA)-20-6-4246
OUTPUT CURRENT
vs. TRANSMITTER OUTPUT LOW VOLTAGE
MAX13181E-4E toc09
OUTPUT CURRENT (mA)6281012
MAX13181E–MAX13184E
+5.0V, ±15kV ESD-Protected, Half-Duplex/
Full-Duplex, RS-485 Transceiver in µDFN
Typical Operating Characteristics (continued)(VCC= +5V, TA= 25°C, unless otherwise noted.)
SHUTDOWN CURRENT
vs. TEMPERATURE
MAX13181E-4E toc10
TEMPERATURE (°C)
SHUTDOWN CURRENT (
DRIVER PROPAGATION DELAY
vs. TEMPERATURE (250kbps) (MAX13182E)
MAX13181E-4E toc11
TEMPERATURE (°C)
DRIVER PROPAGATION DELAY (ns)
CL = 50pF
RL = 54Ω
tDPHL
tPDLH
DRIVER PROPAGATION DELAY
vs. TEMPERATURE (16Mbps) (MAX13184E)
MAX13181E-4E toc12
TEMPERATURE (°C)
DRIVER PROPAGATION DELAY (ns)
CL = 50pF
RL = 54Ω
tDPHLtPDLH
DRIVER PROPAGATION DELAY
(250kbps) (MAX13182E)MAX13181E-4E toc16
400ns/div
VY - VZ
2V/div
2V/div
CL = 50pF
RL = 54Ω
RECEIVER PROPAGATION DELAY
(16Mbps) (MAX13184E)MAX13181E-4E toc17
10ns/div
VA - VB
2V/div
2V/div
CL = 15pF
DRIVER PROPAGATION DELAY
(16Mbps) (MAX13184E)MAX13181E-4E toc18
10ns/div
VY - VZ
2V/div
2V/div
CL = 50pF
RL = 54Ω
RECEIVER PROPAGATION DELAY
vs. TEMPERATURE (250kbps) (MAX13182E)
MAX13181E-4E toc13
TEMPERATURE (°C)
RECEIVER PROPAGATION DELAY (ns)
CL = 15pF
tRPLH
tRPHL
RECEIVER PROPAGATION DELAY
vs. TEMPERATURE (16Mbps) (MAX13184E)
MAX13181E-4E toc14
TEMPERATURE (°C)
RECEIVER PROPAGATION DELAY (ns)
CL = 15pF
tRPLH
tRPHL
RECEIVER PROPAGATION DELAY
(250kbps) (MAX13182E)MAX13181E-4E toc15
400ns/div
VA - VB
2V/div
2V/div
CL = 15pF