LM9036MM-5.0/NOPB ,Ultra-Low Quiescent Current Voltage Regulator 8-VSSOP -40 to 125Electrical Characteristics - LM9036-3.3V = 14V, I = 10 mA, T = 25°C, unless otherwise specified. Bo ..
LM9036MX-5.0 ,Ultra-Low Quiescent Current Voltage Regulatorfeaturesn Dropout voltage typically 200mV @ I = 50mAOUTthat are common to low dropout regulators in ..
LM9040M ,Dual Lambda Sensor Interface AmplifierFeaturesThe Lambda Sensor is used for monitoring the oxygen con-n Single 5V supply operationcentrat ..
LM9040MX ,Dual Lambda Sensor Interface AmplifierGeneral Descriptionture range of −40˚C to +125˚C and is provided in a 14-pinThe LM9040 is a dual se ..
LM9044V ,Lambda Sensor Interface AmplifierFeaturesture range (−40˚C to +125˚C) and is factory trimmed aftern Normal circuit operation guarant ..
LM9061M ,Power MOSFET Driver with Lossless ProtectionApplicationsDSexceed the threshold voltage, the output is latched OFF in an Valve, relay and soleno ..
LPC2132FHN64 ,Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP flash with 10-bit ADC and DAC
LPC2132FHN64 ,Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP flash with 10-bit ADC and DAC
LPC2134FBD64 ,Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP Flash with 10-bit ADC and DAC
LPC2134FBD64 ,Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP Flash with 10-bit ADC and DAC
LPC2141FBD64 ,Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC
LPC2141FBD64 ,Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC
LM9036MM-5.0/NOPB
Ultra-Low Quiescent Current Voltage Regulator 3-TO-252 -40 to 125
LM9036
www.ti.com SNVS140E –AUGUST 2003–REVISED MARCH 2013
LM9036 Ultra-Low Quiescent Current Voltage Regulator
Checkfor Samples: LM9036
1FEATURES DESCRIPTIONThe LM9036 ultra-low quiescent current regulator
Ultra low Ground Pin Current (IGND≤25µA for features low dropout voltage and low currentin the
IOUT= 0.1mA) standby mode. With less than 25µA Ground Pin
• Fixed 5V, 3.3V, 50mA Output currentata 0.1mA load, the LM9036is ideally suited
Output Tolerance ±5% Over Line, Load, and for automotive and other battery operated systems.
The LM9036 retains all of the features that are
Temperaturecommonto low dropout regulators includinga low
• Dropout Voltage Typically 200mV@ IOUT= dropout PNP pass device, short circuit protection,
50mA reverse battery protection, and thermal shutdown.
• −45V Reverse Transient Protection The LM9036 hasa 40V maximum operating voltage
limit,a −40°C to +125°C operating temperature
• Internal Short Circuit Current Limitrange, and ±5% output voltage tolerance over the
• Internal Thermal Shutdown Protection entire output current, input voltage, and temperature
• 40V Operating Voltage Limit range.
Typical Application Requiredif regulatoris located more than2″ from power supply filter capacitor. Requiredfor stability. Mustbe rated over intended operating temperature range. Effective series resistance (ESR) critical, see Electrical Characteristics. Locate capacitoras closeas possibletothe regulator output and ground
pins. Capacitance maybe increased without bound.
Connection Diagram
Figure1. PFM
Top View Number LM9036DT-5.0, LM9036DTX-5.0,
LM9036DT-3.3, LM9036DTX-3.3
See NS Package Number NDP0003B
